Chauvet TRACKSCAN 250R User Manual

Manual is about: DMX-606R

Summary of TRACKSCAN 250R

  • Page 1

    Technical specifications power ac 120v 60hz ac 230~250v 50/60hz fuse 20mm glass 10a fast blow 20mm glass 10a fast blow lamps msd 250w (2000hrs) dimension 560mm x 250mm x 205mm / 22in x 9.8in x 8.1in weight 17 kg / 37.4 lbs 13.5 kg / 29.7 lbs user information (please complete for your records) data p...

  • Page 2

    2 table of contents 1. Safety instruction 2. Technical specification 2.1 inserting / exchanging rotating gobos 3. Lamp 3.1 how to change the frequency 50hz / 60hz 4. How to set the unit 4.1 control panel 4.2 main function 5. How to control the unit 5.1 master/slave built-in preprogrammed function. 5...

  • Page 3

    3 ec declaration of conformity we declare that our products (lighting equipments) comply with the following specification and bears ce mark in accordance with the provision of the electromagnetic compatibility (emc) directive 89/336/eec. En55014-1: 1993, en61000-3-2: 1995, en61000-3-3:1995 en55014-2...

  • Page 4

    4 6. Troubleshooting following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: a. The unit does not work, no light and the fan does not work 1. Check the connect power and main fuse. 2. Measure the mains voltage on the main connector. 3....

  • Page 5

    5 7. 3 pin xlr connectors are more popular than 5 pin xlr. 3 pin xlr: pin 1: gnd, pin 2: negative signal (-), pin 3: positive signal (+) 5 pin xlr: pin 1: gnd, pin 2: negative signal (-), pin 3: positive signal (+) 2. Technical specification power supply - ac 120v~60hz - ac 230/240/250v~50/60hz lamp...

  • Page 6

    6 shaking 168~247 245 135 slowest speed 128 slowest speed 128 stopped 121-134 light green 121-127 light green 116-127 amber- light green 114-120 112-127 amber 108-113 magenta-amber 101-107 amber 103-115 magenta 94-100 96-111 magenta 90-102 shutter 88-167 pink-magenta 88-93 pink 81-87 80-95 pink 77-8...

  • Page 7

    7 lamp : discharge lamp msd 250w color temperature : 8000k average life : 2000 hours 1. Always switch off the main supply and never handle the lamp or luminaries when is hot. 2. Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured alcohol and wipe it with a lint free...

  • Page 8

    8 . Self-test press the menu button up to when the is blinking on the display. Pressing enter button and the unit will run self-test by built in program. To go back to the functions press the menu button again. Fixture hours press the menu button up to when the is blinking on the display. Pressing e...

  • Page 9

    9 button to setup or automatically return to the main functions without any change after 8 seconds. To go back to the functions without any change press the menu button again. Slave mode press the menu button up to when the is showing on the display. Pressing enter button and the display will blink....