User manual.
Well™ 2.0 user manual rev. 01 edition notes the well™ 2.0 (wireless event led luminaire) user manual rev. 01 covers the description, safety precautions, installation, programming, operation, and maintenance of the well™ 2.0 product. Trademarks chauvet® is a registered trademark of chauvet & sons inc...
Well™ 2.0 user manual rev. 01 -a- table of contents 1. Before you begin ............................................................................................... 1 what is included.....................................................................................................................
-b- well™ 2.0 user manual rev. 01 reset ......................................................................................................................................... 16 tour notes ...............................................................................................................
Well™ 2.0 user manual rev. 01 page 1 of 28 1. Before you begin what is included single unit: · one well™ 2.0 fixture · one battery charger · warranty card · quick reference guide six-piece set: · six well™ 2.0 fixtures · one six-bay flight case with built-in battery charger · warranty card · quick r...
Page 2 of 28 well™ 2.0 user manual rev. 01 safety notes please read the following notes carefully because they include important safety information about the installation, usage, and maintenance of this product. It is important to read all these notes before starting to work with this product. There...
Well™ 2.0 user manual rev. 01 page 3 of 28 2. Introduction product description the well™ 2.0 (wireless event light luminaire) is a battery powered, portable upward wash light. It consists of a single unit that contains the 12 v gel battery, the leds, the led drivers, and the main control. The batter...
Page 4 of 28 well™ 2.0 user manual rev. 01 dmx channel summary tour dmx channel function 1 master dimmer 2 module 1 red 3 module 1 green 4 module 1 blue 5 module 2 red 6 module 2 green 7 module 2 blue 8 color macro + white balance 9 strobe 10 auto + custom programs 11 auto speed 12 dimmer speed arc....
Well™ 2.0 user manual rev. 01 page 5 of 28 product overview front view bottom view dmx in/out on/off switch handle power indicator led panels control panel storage battery switch retractable foot foot release w dmx antenna led panel adjust battery connector.
Page 6 of 28 well™ 2.0 user manual rev. 01 product dimensions.
Well™ 2.0 user manual rev. 01 page 7 of 28 3. Setup ac power the well’s battery charger, whether stand-alone or inside the flight case, has an auto- ranging power supply that can work with an input voltage range of 100~240 vac, 50/60 hz. Make sure that you are connecting this product to the proper v...
Page 8 of 28 well™ 2.0 user manual rev. 01 master/slave connectivity the master/slave mode allows a well™ 2.0 unit to control or more well™ 2.0 units without a dmx controller. See the master/slave section of the operation chapter for programming information. The master links to the slave fixtures us...
Well™ 2.0 user manual rev. 01 page 9 of 28 4. Operation operation notes · always operate the unit in an upright position. · never tilt the unit more than 10º. · only use the retractable foot to tilt the unit. · do not operate the unit in a sealed enclosure or in an area without air circulation. Turn...
Page 10 of 28 well™ 2.0 user manual rev. 01 battery charge notes · make sure to turn the battery storage switch on before connecting the unit to the charger. · always use the supplied charger to recharge the built-in battery. · recharge the battery within three days of last use. · recharge the batte...
Well™ 2.0 user manual rev. 01 page 11 of 28 wireless operation the well™ 2.0 can operate in w-dmx mode up to 300 m (900 feet) from the w-dmx transmitter. The w-dmx receiver in the well unit must be paired with the w-dmx transmitter for wireless operation. Initial setup 1) turn the w-dmx transmitter ...
Page 12 of 28 well™ 2.0 user manual rev. 01 control panel description button function exits from the current menu or function enables the currently displayed menu or sets the currently selected value in to the current function navigates upwards through the menu list and increases the numeric value w...
Well™ 2.0 user manual rev. 01 page 13 of 28 continued from previous page static color the static color mode allows for permanent rgb color mixing without a dmx controller. 1) go to stat. 2) select the desired color (red, gren, or blue). 3) select the desired color value (0~255). 4) repeat for the ot...
Page 14 of 28 well™ 2.0 user manual rev. 01 continued from previous page color setting the color setting determines how the well generates the white color based on various rgb settings. 1) go to set. 2) select colo. 3) select off, rgbw, or uc. Off: when the rgb faders are all set to “255”, the outpu...
Well™ 2.0 user manual rev. 01 page 15 of 28 continued from previous page rgb to white adjustment this setting allows the user to select and edit the temperature of the white color shown when rgb to white (rgbw) is active in set > colo (see color setting). 1) go to cal2 and 2) press when you see rgb....
Page 16 of 28 well™ 2.0 user manual rev. 01 continued from previous page reset this setting allows the user to reset the well fixture to its default values, including deleting the custom programs. 1) go to set. 2) select rest. 3) when prompted, enter the master access password as shown in control pa...
Well™ 2.0 user manual rev. 01 page 17 of 28 menu map.
Page 18 of 28 well™ 2.0 user manual rev. 01 dmx values tour channel function value percent/setting 1 master dimmer 000 ó 255 0~100% 2 module 1 red 000 ó 255 0~100% 3 module 1 green 000 ó 255 0~100% 4 module 1 blue 000 ó 255 0~100% 5 module 2 red 000 ó 255 0~100% 6 module 2 green 000 ó 255 0~100% 7 m...
Well™ 2.0 user manual rev. 01 page 19 of 28 arc.1 channel function value percent/setting 1 red 000 ó 255 0~100% 2 green 000 ó 255 0~100% 3 blue 000 ó 255 0~100% ar1.D channel function value percent/setting 1 master dimmer 000 ó 255 0~100% 2 red 000 ó 255 0~100% 3 green 000 ó 255 0~100% 4 blue 000 ó ...
Page 20 of 28 well™ 2.0 user manual rev. 01 5. Technical information fixture maintenance to maintain optimum performance and minimize wear, the user should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, the user should ...
Well™ 2.0 user manual rev. 01 page 21 of 28 troubleshooting guide symptom cause(s) action(s) low output depleted battery recharge battery incorrect color settings check colo, cal1, and cal2 settings dirty led lens cover clean led lens cover led panels in wrong angle reorient led panels one or more l...
Page 22 of 28 well™ 2.0 user manual rev. 01 returns procedure the user must send the merchandise prepaid, in the original box, and with its original packing and accessories. Chauvet® will not issue call tags. Call chauvet® and request a return merchandise authorization (rma) number before shipping t...
Well™ 2.0 user manual rev. 01 page 23 of 28 technical specifications dimensions and weight length width height weight 7.0 in (200 mm) 7.5 in (190 mm) 13.8 in (350 mm) 36.3 lbs (16.5 kg) note: dimensions in inches rounded to the nearest decimal digit. Electrical power supply type range voltage select...
Chauvet® 5200 nw 108th avenue sunrise, fl 33351 (usa) (800) 762-1084 – (954) 577-4455 fax (954) 929-5560 www.Chauvetlighting.Com well™ 2.0 user manual rev. 01 may 2013.