Summary of Xeno 2500
Page 1
User manual.
Page 2: Edition Notes
Edition notes ii xeno™ 2500 user manual rev. 1 edition notes the xeno™ 2500 user manual rev. 1 covers the description, safety precautions, installation, programming, operation, and maintenance of the xeno™ 2500. Chauvet® released this edition of the xeno™ 2500 user manual in february 2013. Trademark...
Page 3: Table Of Contents
Table of contents xeno™ 2500 user manual rev. 1 -iii- table of contents 1. Before you begin ........................................................................................................................................ 1 what is included .......................................................
Page 4
Table of contents iv xeno™ 2500 user manual rev. 1 notes.
Page 5: 1. Before You Begin
Before you begin xeno™ 2500 user manual rev. 1 1 1. Before you begin what is included • xeno™ 2500 • power input cord • scroller bracket with hardware • warranty card • quick reference guide claims carefully unpack the product immediately and check the box to make sure all the parts are in the packa...
Page 6: Product At A Glance
Before you begin 2 xeno™ 2500 user manual rev. 1 product at a glance use on dimmer auto programs outdoor use auto-ranging power supply sound activated replaceable fuse dmx user serviceable master/slave duty cycle safety notes please read the following safety notes carefully before starting to work w...
Page 7: 2. Introduction
Introduction xeno™ 2500 user manual rev. 1 3 2. Introduction product description the xeno™ 2500 is an ultra-high frequency strobe luminaire powered by a 2,500-watt xenon lamp. When multiple products are linked, built-in automated programs trigger several pre-programmed shows via master/slave. The pr...
Page 8
Introduction 4 xeno™ 2500 user manual rev. 1 overview front view side view top view rear view bottom view yoke scroller attachment bracket yoke adjustment knob safety cable loop control panel power breaker 3- and 5 pin-dmx in/out slave out sensitivity knob microphone.
Page 9
Introduction xeno™ 2500 user manual rev. 1 5 dimensions.
Page 10: 3. Setup
Setup 6 xeno™ 2500 user manual rev. 1 3. Setup ac power each xeno™ 2500 has an auto-ranging power supply that works with an input voltage range of 208~230 vac, 50/60 hz. To determine the power requirements for each xeno™ 2500, refer to the label affixed to the product. You can also refer to the tech...
Page 11: Dmx Linking
Setup xeno™ 2500 user manual rev. 1 7 dmx linking you can link the xeno™ 2500 to a dmx controller using a standard dmx serial connection. If using other dmx compatible products with the xeno™ 2500, you can control each individually with a single dmx controller. Dmx modes the xeno™ 2500 uses the stan...
Page 12
Setup 8 xeno™ 2500 user manual rev. 1 4. Side b contains 2 wires (1- white and 1 clear) that are connected to a terminal block. Unscrew these wires and carefully note where each was connected. Caution: do not misalign or reverse the connections when installing the new lamp! 5. Using the ceramic ends...
Page 13: Scroller Mounting
Setup xeno™ 2500 user manual rev. 1 9 scroller mounting bracket the xeno™ 2500 is includes an adaptor bracket to mount a scroller. Follow the procedure below to mount the scroller brackets. Procedure 1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to cool ...
Page 14: Mounting
Setup 10 xeno™ 2500 user manual rev. 1 mounting before mounting this product, read and follow the safety notes in this manual. Orientation always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance. Rigging chauvet® recommends us...
Page 15: 4. Operation
Operation xeno™ 2500 user manual rev. 1 11 4. Operation control panel description button function sets the currently selected value into the selected function or exits from the current menu or function. Press and hold for 3 seconds to turn display backlight off navigates upward through the menu list...
Page 16
Operation 12 xeno™ 2500 user manual rev. 1 master/slave mode this mode allows you to set the master product to control other products daisy chained together. There are 3 ways to configure master/slave mode. Standalone flash master/slave mode 1. Go to fl. (00~99) in the main level on the first master...
Page 17
Operation xeno™ 2500 user manual rev. 1 13 dmx values 3 ch channel function value percent/setting 1 mode selection 000 009 010 099 100 199 200 249 250 255 sound-active mode single flash mode quad flash mode blinder effect blinder effect with fade out 2 sound-active 000 005 006 030 031 ...
Page 18
Operation 14 xeno™ 2500 user manual rev. 1 dmx values (cont.) 4 ch channel function value percent/setting 1 mode selection 000 009 010 099 100 199 200 249 250 255 sound-active mode single flash mode quad flash mode blinder effect blinder effect with fade out 2 sound-active 000 005 006 ...
Page 19: 5. Technical Information
Technical information xeno™ 2500 user manual rev. 1 15 5. Technical information product maintenance to maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, clean this...
Page 20: 6. Technical Specifications
Technical specifications 16 xeno™ 2500 user manual rev. 1 6. Technical specifications dimensions and weight length width height weight 18.35 in (466 mm) 4.41 in (112 mm) 10.87 in (276 mm) 8.4 lbs (3.81 kg) note: dimensions in inches rounded to the nearest decimal digit. Electrical power supply type ...
Page 21: Contact Us
User manual contact us world headquarters chauvet® general information address: 5200 nw 108th avenue sunrise, fl 33351 voice: (954) 929-1115 fax: (954) 929-5560 toll free: (800) 762-1084 united kingdom and ireland chauvet® europe ltd. General information address: unit 1c brookhill road industrial es...