Conair GS28TKC Instructions For Use Manual

Follow the steps for care and cleaning.

FILLING THE WATER CONTAINER  

(PRIOR TO PLUGGING IN THE APPLIANCE)

Remove the water container with the handle 

OPERATING THE STEAMER 

1. Make sure the "I"/"O" (ON/OFF) switch is 

in the "O" (OFF) position. 

2. Make sure all hose connections are 

secure and tight.

3. Make sure the telescopic pole is fully 

extended and the hose is not twisted  

or kinked.

4. Plug the steamer cord into a normal  

electrical outlet.

5. Turn the "I"/"O" (ON/OFF) switch to the  

"I" (ON) position.

6. The switch will light to indicate when 

power is "I" (ON)

7. Steam will be produced from the  

nozzle in about one minute.

8. To turn the steamer off, turn the "I"/"O" 

(ON/OFF) switch to the "O" (OFF) position.

Cool-touch  

handle with  

easy-grip  

raised ribs

Removable  

5ft. cool-touch 

insulated hose

with storage clip

Telescoping pole  

hangs garments  

and nozzle and  

collapses for  

storage

360˚ rotating 

hanger

Steam nozzle

Removable, easy-

to-fill and easy-

to-clean 2.5-liter 

water tank with 

integrated carry 

handle

GETTING TO KNOW  

YOUR STEAMER

Pant clips

Fig. 4 

Fig. 5

and turn upside down. Unscrew the valve 

in the center of the base. Fill container by 

holding container under a source of running 

cold water until the container is filled to the 

desired level. Do not overfill. Screw the valve 

cap onto the water container and return the 

container to the upright position. Place the 

water container onto the base and make cer-

tain it is seated properly in the cavity.

DO NOT FILL THE CONTAINER WITH HOT 

WATER.