Conair GS5RC Instructions For Use Manual
CLEANING AND STORING
I. Turn the ON/OFF switch to the OFF posi-
tion and unplug from the power source.
2. Wait for the steamer to cool completely
for at least 30 minutes.
3. Unplug power cord and gently wrap
around built-in cord wrap underneath.
4. Remove excess water from the reservoir
by lifting the unit and pouring down a drain.
5. Wrap hose around container and replace
T-nozzle in its cradle. (as shown)
TROUBLESHOOTING THE STEAMER
• PROBLEM - No steam
CAUSE - Steamer not turned on
SOLUTION - Turn on/off switch to
“on” position
• PROBLEM - Steamer fails to heat
CAUSE - Steamer not plugged in
SOLUTION - Plug into electrical outlet
• PROBLEM - No steam
CAUSE - Water level is low
SOLUTION - Turn ON/OFF switch OFF
and refill water container
• PROBLEM - Water drips from nozzle
CAUSE - Condensation in hose
SOLUTION - Hold the hose vertically
and allow water to drain back into unit
• PROBLEM - Nozzle gurgles
CAUSE - Condensation in hose
SOLUTION - Hold the hose vertically and
allow water to drain back into unit
• PROBLEM - Poor steam performance
CAUSE - Sediment in container
SOLUTION - Decalcify reservoir and
water container
Note: Minerals in water will vary in
different areas. To insure continued
operation of the steamer, never store
without cleaning and removing excess
water from the reservoir and water
container.
LIMITED ONE YEAR WARRANTY
Conair will repair or replace (at our option) your unit free of
charge for 12 months from the date of purchase if the
appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective
product to the service centre listed below that is nearest
you, together with your purchase receipt and $7.50 for
postage and handling. In the absence of a purchase
receipt, the warranty period shall be 12 months from the
date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILI-
TIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN DURA-
TION TO THE 12 MONTH DURATION OF THIS WRITTEN,
LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPE-
CIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you may
also have other rights, which vary from province to
province.
8. To turn steamer off, press on/off switch
to the off position or replace t-nozzle in its
cradle until you hear a click.
NOTE
This steamer is designed to sit on the floor.
Do not put on a table or chair when in use.
OTHER IMPORTANT NOTES
During operation, the steamer hose may
gurgle. This is a normal result of conden-
sation collecting inside the hose. Simply
lift the "T" handle upward until the hose is
extended to its full height. The gurgling
will disappear when the excess moisture
inside the hose has had a chance to drain
back into the base.
HOW TO STEAM
Grasp the "T" handle steam nozzle with the
steam jets facing away from you. Begin at
the bottom of the fabric to allow the steam
to rise inside and outside, removing
wrinkles. Slowly move the nozzle from the
bottom to the top of the fabric. Remove the
nozzle from the garment and smooth the
fabric with your free hand. Some fabrics
are best steamed on the underside of the
material. This will allow the fibers of the
fabric to relax, eliminating wrinkles.
NOTE: Test fabric for color fastness in an
inconspicuous spot. Drape linens, towels,
handkerchiefs and napkins over a rod or
place onto a towel rack.
Heavier fabrics may require repeated
steaming. Repeat as necessary.
With practice, you will gain speed and
efficiency. You will soon learn which fab-
rics require multiple steam applications.
Do not directly touch velvet or silk with the
steam head.
Always steam with hose in upright
position, so any condensation is free
to flow back into the steamer.
If you steam in a low position, condensa-
tion will collect inside the hose. This will
cause gurgling and some water droplets
to form near the steam jets on the "T"
handle. To avoid this: frequently lift the
steam handle upward until the hose is
extended to its full height.
TO STEAM DRAPES:
Wash and dry drapes as directed accord-
ing to fabric type. Re-hang drapes and
steam drapes when in place.
Instructions for Use
Model GS5RC
®
DECALCIFICATION
If the appliance begins to produce steam
more slowly than usual, if the steamer
stops producing steam and then starts
again, you may need to decalcify your
steamer. Decalcification refers to removing
the calcium deposits which form over
time on the metal parts of the Steamer.
For best performance from Conair
Garment Steamer, decalcify the unit from
time to time. The frequency depends upon
the hardness of your tap water and how
often you use the Steamer.
To decalcify, use a solution of 1/3 white
vinegar and 2/3 water in the water con-
tainer. Plug the unit into electrical outlet.
Turn to the ON position and run until half
the amount has steamed. Turn the unit to
the OFF position, unplug from electrical
outlet, and allow to sit for 30 minutes.
Remove excess water from the reservoir
by lifting the unit, inverting and pouring
the water over sink, and allowing water to
drain from internal reservoir. Repeat the
above procedure as many times as neces-
sary until a normal steam rate returns,
usually 2-3 times. With each repeated
cycle, use a fresh solution of vinegar and
water. Run one cycle of fresh, cold water
through the unit at the completion of
decalcification, before using the unit again
to steam garments.
For your safety and continued enjoyment of
this product, always read the instruction book
carefully before using.
Convenient to
use on CLOTHES,
DRAPES
& LINENS
ready for storage
using the over the door hook
CAUTION:
Hose will be hot when
in use. Avoid prolonged contact.
high velocity steam
jet T-nozzle
SERVICE CENTRE:
CONAIR CONSUMER PRODUCTS INC.
100 Conair Parkway
Woodbridge, Ontario
L4H 0L2
1-800-472-7606
©2007 Conair Consumer Products Inc.
03CN1480
IB-5210A
GS5RC IB-5210A 1/11/07 10:22 AM Page 2