Conairphone Metropolis SW2505 Owner's Manual - page 2

Pushbutton Dialing Convenience on Rotary Lines

This phone can be used as a direct replacement for rotary service. If your home

is wired for rotary service, move switch to pulse position and enjoy pushbutton

dialing ease.

NOTE : Your telephone will pulse for a second or two while you are dialing. This

simulates the dialing action.

True Tone Dialing

If your home is wired for tone service, move switch to tone position. This can be

used as a direct replacement for tone phones including AT&T’s Touch Tone

®

Series. Also allows use of long distance dialing services and tone accessed

computers.

NOTE : If your home is not wired for tone service, you will not be able to make

outgoing calls while in the tone mode. You have rotary service.

INSTALLATION

Line Cord Connection

With modular jack telephone system connect the straight telephone line cord to

the modular jack located on the back of the base. Insert the other end of cord into

a modular wall jack. Make sure all plugs snap firmly in place (see Diagram B).

With a four prong style jack, simply use a plug in modular adapter (see Diagram C).

Coil Cord Connection

Insert the coil cord by plugging longer straight end into the modular jack on the

side of the base. Connect the other end into the modular jack located on handset

(see Diagram D).

Telephone Number Insert

An area for your phone number has been provided on the reverse side of the

Metropolis

®

 logo located in the center of the dial key area. Remove the plastic

window, write your phone number on the label and replace it. Slightly bend the

plastic cover to slip back into position.

4

Diagram B

Diagram C

Diagram D

GET  TO  KNOW  YOUR  METROPOLIS

®

  CONAIRPHONE

TM

3

Diagram A

PREPARATION

First carefully remove your CONAIRPHONE

TM

 from the unit carton. In addition to

the handset and telephone base, each carton contains the following accessories:

• One ten (10) ft. fully modular coil cord

• One seven (7) ft. fully modular telephone line cord.

• Owner’s Manual

• One (1) Important Notice

• One (1) additional Telephone Number Insert

Important Notice

Your CONAIRPHONE

TM

 will operate on all systems, true tone or rotary.

1. If your home is wired for rotary service, move switch to pulse position (P).

2. If your home is wired for tone service, move switch to tone position (T).

3. If you are unsure of the type of service you have, ask your local telephone company.