1. DL manuals
  2. Conairphone
  3. Answering Machine
  4. TAD2018
  5. Owner's Manual

Conairphone TAD2018 Owner's Manual

Manual is about: CallKeeper Digital Answering System

Summary of TAD2018

  • Page 1

    Reduce 74.3% printed. Ib size is 105 x 138 mm.(ib-4579) callkeeper digital answering system model tad2018 r owner's manual play on/off repeat greeting stop/save volume r r.

  • Page 2: Location of Controls

    Top view & side view : location of controls 2 rear view: play message/batt.Low indicator repeat stop/save on/off greeting volume control microphone play on/off repeat greeting stop/save volume telephone extension line ac adaptor jack ring select ts 4 2 ac9v 200ma use only with class 2 power source t...

  • Page 3: Save These Instructions

    Before using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, to persons, including the follow ing: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug thi...

  • Page 4: Save These Instructions

    Safety instructions for batteries caution to reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the size and type of batteries mentioned in the owner's manual. 2. Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for p...

  • Page 5: Installation

    Installation caution 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the incoming telephone line has been disconnec...

  • Page 6: Installation (Cont.)

    Message indications message indicator status message indicator counts down from 9 to 0. Message indicator display 1-9. Message indicator displays "9" messages. Message indicator flashes rapidly. Message indicator shows "0" and does not flash. Reason unit is checking memory. You have 9 or more messag...

  • Page 7: Setting The Voice

    Recording your greeting (cont.) sample message: "hello, this is . I can't come to the phone right now, please leave your name and phone number after the beep. You will have 45 seconds to leave your message. Thank you for calling." checking your greeting message 1. Press the greeting control once qui...

  • Page 8: Message Playback

    Message playback the message indicator displays the number of messages received. The number displayed indicates the number of messages received (up to 9). To hear your messages 1. Press and release the play button on your unit. 2. The tad2018 will automatically playback your messages in the order th...

  • Page 9: Special Features

    Special features message capacity full detection when the message capacity is full, the unit will announce 3 short beep tones on the 10th ring , pause 10 seconds, and then automatically disconnect the telephone line. Voice activated recording (vox) your tad2018 records messages for up to 45 seconds,...

  • Page 10: Remote Operation

    Toll saver (ts) your unit has a built-in automatic toll saving feature. This feature lets you know if you have received any messages before it answers, thus saving you on long distance costs. How toll saver works if you have set the ring select switch to toll saver(ts), when calling your unit from a...

  • Page 11: Remote Operation (Cont.)

    Important remote message retrieval will not work when calling from a rotary or push button pulse dialing phone, unless a tone generator is used. Also, some touch tone phones only output tones for a fraction of a second. If you experience difficulty with remote operation, try another phone, or use a ...

  • Page 12

    Problem no answer no power no incoming messages recorded possible cause ac adaptor is disconnected from wall outlet or back of unit ac adaptor is disconnected from wall outlet or back of unit unit is in the "off" mode power to electrical outlet may be off power to electrical outlet may be off teleph...

  • Page 13

    Problem no remote operation the machine is cutting off incoming messages the machine beeps during the recording of my outgoing greeting after a power outage, greeting and incoming messages are lost possible cause unit is in the "off" position security code not entered correctly remote security code ...

  • Page 14: Fcc Wants You to Know

    Your telephone company may make changes in its facilities, equipment, operation or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with...

  • Page 15: Fcc Wants You to Know

    15 fcc wants you to know an applicable certification jacks universal service order codes (usoc) for the equipment is provided (i.E., rj11c) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network mus...

  • Page 16: Limited Warranty

    Service centers conair corporation 7475 north glen harbor blvd., glendale, az 85307 printed in china ib-4579a limited warranty conairphone consumer hotline if you have any questing concerning your answering system, call our consumer hotline at 1-800-366-0937, 8:30 am - 9:00 pm (est), saturday 8:30 a...