Conbrov DV9 User Manual - Led Status
LED status
Operation LED status indication
15
Power On
(Press and hold the Power button
for 2 seconds)
Normally the blue LED indicator will
stay on.
If no microSD, the blue LED flashes
for 10 seconds then powers off.
The camera powers Off after 60
seconds if there is no any operation.
Continuously recording
(Press REC after power on)
Press REC, the blue LED indicator
will automatically record for 10
minutes per file.
Press REC again, the blue LED will
be on, save the present video and
stop recording.
PIR motion detection recording
(Press MD after power on)
Red LED indicator always on.
When there are people moving, the
blue LED indicator turns On and
then goes Off. The red light flashes
and goes Off (the first red light will
stay On) Now the camera will record
the present motion and save a video
to the microSD card.
Press MD again, the blue and red
LEDs flash and go off. The camera
will save present video, quit MD
and power off.
Charging
The yellow LED stays On during
charging; once the camera is full
charged, it will go Off.
Power Off
(Press the Power button for a few
seconds)
LED flashes alternately red and
blue, then off.