Concept pro va-kbdpro+ 3 axis ptz / dvr control keyboard user manual.
Contents key features 1 example system configuration 1 operation modes 2 getting started 2 programming the keyboard matrix setup 3 dvr setup 3 camera setup 4 key buzzer 5 key id 5 key level 5 monitor range 5 camera range 5 dvr range 5 change default password 5 reset factory defaults 5 keyboard opera...
Key features flexible configuration the va-kbdpro+ supports multiple telemetry protocols for compatibility with a wide range of ptz devices. Protocols and baudrates can be set globally or individually for each ptz id dvr control the va-kbdpro+ is designed to control all the main functions of one or ...
Operation modes the va-kbdpro+ has 3 operating modes which are used depending on the system configuration 1. Cam mode in cam mode, the va-kbdpro+ functions as a standard ptz telemetry controller. The operator can select individual telemetry devices to control and can also access all features of thos...
Programming the keyboard to access the keyboard setup, press the menu key – the keyboard will prompt for a password password: ********** enter the default password of 9876543210 and press enter. The setup menu is displayed set matrix: >set_protocol> to navigate the menu, move the joystick up/down pr...
Camera setup set protocol enter the keyboard setup menu and use the joystick to highlight set camera. The cursor flashes next to set_protocol set camera: >set_protocol> press enter to display the set protocol screen all :>vc 0001:>vc protocols can be set globally or for each individual channel. To s...
Key buzzer the va-kbdpro+ has an internal key press buzzer which can be enabled or disabled as required. Enter the keyboard setup menu and use the joystick to highlight key buzzer. The cursor flashes next to enable beep key buzzer: ▓ enable beep twist the joystick left / right to toggle between enab...
Keyboard operation cam mode please note that all the operation examples given here are for the concept pro vhsd-8xx series of speed domes. For any other type of ptz equipment, reference should be made to its user manual for the appropriate command sequences. To place the keyboard in to cam mode, pre...
Keyboard operation dvr mode please note that this keyboard can only control the concept pro vxm4 range of dvrs to place the keyboard in to dvr mode, press the dvr button repeatedly until only the yellow dvr led is lit monitor dvr 001 001 to select a particular dvr id, press cam/dvr – xxx – enter whe...
