Concept Pro VCP553 User Manual

Manual is about: Colour Mono Zoom Camera

Summary of VCP553

  • Page 1

    Vcp553 colour mono zoom camera user manual.

  • Page 2: Caution

    1. This installation should be made by a qualified service person and should abide to all local codes. 2. Do not disassemble the camera - this is to prevent electronic shock and/or malfunction. Do not loosen any screws on the camera body. 3. Do not touch the front glass directly. If necessary, use a...

  • Page 3: Installation

    1. This installation should be made by a qualified service person and should abide to all local codes. 2. Do not disassemble the camera - this is to prevent electronic shock and/or malfunction. Do not loosen any screws on the camera body. 3. Do not touch the front glass directly. If necessary, use a...

  • Page 4: Example

    Example.

  • Page 5: Connection Example

    Connection example button operations dvr cam menu set preset aux/ search run/ panic pattern/ setup prev / display next / seq mon cam/dvr esc enter 1 2 3 4 5 6 7 8 9 0 open far wide iris focus zoom close near tele power rx tx dvr ai cam alm/ group/ off/ on/ vst/ * psu function keys power input termin...

  • Page 6: Focus

    Focus exposure white balance focus mode zoom trig / manual / auto interval run time 0 ~ 254 interval 0 ~ 254 zoom start 1 ~ 22 zoom stop 1 ~ 264 zoom speed slow / normal / fast / v. Fast d-zoom on / off min. Dist 10cm / 10m / inf shutter off / flk / 1/160 ~ 1/100000 / 2fld ~ 256fld / auto iris auto ...

  • Page 7: Image

    Image d-wdr / blc day & night off d-wdr level low 0 ~ 15 level high 0 ~ 15 blc level low / middle / high area h. Start 0 ~ 7 v. Start 0 ~ 7 width 0 ~ 8 height 0 ~ 8 hsblc all day / night level 0 ~ 8 area h. Start 0 ~ 7 v. Start 0 ~ 7 width 0 ~ 8 height 0 ~ 8 colour bw external auto detect mode video...

  • Page 8: Special

    Special cam id baudrate language title privacy motion osd set 0 ~ 255 2400 ~ 38400 eng off on off on off on cam id zoom mag func osd osd colour (opens keyboard) mask no disp mode colour transparent area no detect mode h. Start v.Start width height sense alarm time disp. Mode off / on off / on off / ...

  • Page 9: Reset

    Osd factory default settings function focus exposure white balance d-wdr/blc day &night image special status auto shutter iris agc bright max.Agc max. Field atw off auto 3dnr freeze rotate sharpness negative cam id baudrate language title privacy motion auto auto auto 50 middle off off off off 15 of...

  • Page 10: Dimensions

    Dimensions.

  • Page 11: Specification

    Signal type ntsc pal ccd image sensor 1/4inch sony super had ccd total pixels 410k(811x508) 470k(795x596) effective pixels 380k(768x494) 440k(752x582) optics lens 22x, f=3.9* ~ 85.8mm(f1.6 ~f3.7) min. Focus distance 3.9mm* ~ 85.8mm digital zoom 1x ~ 10x sync scanning system 2:1 interlace sync. Syste...

  • Page 13

    Design and specification are subject to change without notice..