1. DL manuals
  2. Conceptronic
  3. Network Router
  4. C54APRA2+
  5. User Manual

Conceptronic C54APRA2+ User Manual

Manual is about: C54APRA2+ for Annex A, C54APRB2+ for Annex B

Summary of C54APRA2+

  • Page 1

    C54apra2+ for annex a c54aprb2+ for annex b 802.11g wireless adsl router user’s guide june 2006.

  • Page 2: Table of Contents

    Table of contents before you start ...................................................................................................... Iv installation overview.......................................................................................................................................Iv ...

  • Page 3

    Lan clients .................................................................................................................................................... 54 snmp.......................................................................................................................................

  • Page 4: Before You Start

    C54apra2+ / c54aprb2+ wireless adsl router user guide iv about this user guide this user’s guide provides instructions on how to install the c54apra2+ / c54aprb2+ wireless adsl router and use it to connect a computer or ethernet lan to the internet. Note you must have an adsl account setup in order ...

  • Page 5: Installation Notes

    C54apra2+ / c54aprb2+ wireless adsl router user guide v installation notes in order to establish a connection to the internet it will be necessary to provide information to the router that will be stored in its memory. For some users, only their account information (user name and password) is requir...

  • Page 6

    C54apra2+ / c54aprb2+ wireless adsl router user guide vi information from your isp: wan settings these settings include your connection type. The connection type describes the method your internet service provider uses to transport data between the internet and your computer(s) and how it identifies...

  • Page 7

    C54apra2+ / c54aprb2+ wireless adsl router user guide vii information about your wireless lan: ssid print this page to record info here channel authentication wep (hex/ascii) key 1: key 2: key 3: key 4: wpa (802.1x) radius ip address: port: secret: wpa-psk pass phrase:.

  • Page 9: Introduction

    C54apra2+ / c54aprb2+ wireless adsl router user guide 1 1 introduction this section provides a brief description of the router, its associated technologies, and a list of router features. Router description and operation the c54apra2+ / c54aprb2+ wireless adsl router is designed to provide connectiv...

  • Page 10: Router Features

    C54apra2+ / c54aprb2+ wireless adsl router user guide 2 router features the c54apra2+ / c54aprb2+ adsl router utilizes the latest adsl enhancements to provide a reliable internet portal suitable for most small to medium sized offices. The c54apra2+ / c54aprb2+ advantages include: • ppp (point-to-poi...

  • Page 11

    C54apra2+ / c54aprb2+ wireless adsl router user guide 3 standards compatibility and compliance the c54apra2+ / c54aprb2+ complies with or is compatible with the following standards as recognized by their respective agencies. • itu g.992.1 (g.Dmt) compliant • itu g.992.2 (g.Lite “splitterless adsl”) ...

  • Page 12: Front Panel Display

    C54apra2+ / c54aprb2+ wireless adsl router user guide 4 front panel display place the router in a location that permits an easy view of the led indicators on the front panel. The led indicators on the front panel include power, status, adsl, wlan, and lan. The adsl, wlan, and lan indicators monitor ...

  • Page 13: Rear Panel Connections

    C54apra2+ / c54aprb2+ wireless adsl router user guide 5 rear panel connections all cable connections to the router are made at the rear panel. Connect the power adapter here to power on the router. Use the reset button to restore the settings to the factory default values in the next chapter for ins...

  • Page 14

    C54apra2+ / c54aprb2+ wireless adsl router user guide 6 setting up a wireless network in order to get the best performance from the wireless component of the router, you should have some basic understanding of how wireless networks operate. Wireless networking is a relatively new technology and ther...

  • Page 15

    C54apra2+ / c54aprb2+ wireless adsl router user guide 7 location and wireless operation many physical environmental factors can impact wireless networks. Radio waves are used to carry the encoded data between devices. These radio transmissions can become degraded due to signal attenuation, multi-pat...

  • Page 16: Hardware Installation

    C54apra2+ / c54aprb2+ wireless adsl router user guide 8 2 hardware installation the c54apra2+ / c54aprb2+ wireless adsl router maintains three separate interfaces, an ethernet lan, a wireless lan and an adsl internet (wan) connection. Carefully consider the router’s location suitable for connectivit...

  • Page 17: Network Connections

    C54apra2+ / c54aprb2+ wireless adsl router user guide 9 network connections wired network connections are provided through the adsl port and the four ethernet ports on the back of the router. See the rear panel diagram above and the illustrations below for examples connect adsl line use the adsl cab...

  • Page 18: Basic Router Configuration

    C54apra2+ / c54aprb2+ wireless adsl router user guide 10 3 basic router configuration the first time you set up the router it is recommended that you configure the wan connection using a single computer making sure that both the computer and the router are not connected to the lan. Once the wan conn...

  • Page 19: Login to Home Page

    C54apra2+ / c54aprb2+ wireless adsl router user guide 11 access the configuration manager in order to make sure your computer’s ip settings allow it to communicate with the router, it is advisable to configure your system be a dhcp client – that is, it will get ip settings from the router. Appendix ...

  • Page 20: Configure The Router

    C54apra2+ / c54aprb2+ wireless adsl router user guide 12 configure the router when you successfully connect to the web manager, the home directory tab will display the setup wizard window. You can launch the setup wizard from this page or use the buttons located in the left panel of the web page to ...

  • Page 21: Wizard

    C54apra2+ / c54aprb2+ wireless adsl router user guide 13 wizard to use the setup wizard, click the run wizard button in the first browser window and follow the instructions in the pop-up window that appears. The initial window summarizes the setup process. Click the next button to proceed. You may s...

  • Page 22

    C54apra2+ / c54aprb2+ wireless adsl router user guide 14 using the setup wizard - choose time zone choose the time zone you are in from the pull-down menu and click next. This sets the system time used for the router. If you wish to return to the previous window during the setup process, click the b...

  • Page 23

    C54apra2+ / c54aprb2+ wireless adsl router user guide 15 using the setup wizard - choose connection type now select the connection type used for the internet connection. Your isp has given this information to you. The connection types available for “multi-user” mode are pppoe/pppoa, dynamic ip addre...

  • Page 24

    C54apra2+ / c54aprb2+ wireless adsl router user guide 16 using the setup wizard - for pppoe/pppoa connections: 1. Type in the username and password used to identify and verify your account to the isp. 2. Select the specific connection type from the drop-down menu. The available ppp connection and en...

  • Page 25

    C54apra2+ / c54aprb2+ wireless adsl router user guide 17 using the setup wizard - for dynamic ip address connections: 1. Select the specific connection type from the drop-down menu. The available dynamic ip address connection and encapsulation types are 1483 bridged ip llc and 1483 bridged ip vc-mux...

  • Page 26

    C54apra2+ / c54aprb2+ wireless adsl router user guide 18 using the setup wizard - for static ip address connections: 1. Select the specific connection type from the drop-down menu. The available static ip address connection and encapsulation types are 1483 bridged ip llc, 1483 bridged ip vc-mux, 148...

  • Page 27

    C54apra2+ / c54aprb2+ wireless adsl router user guide 19 using the setup wizard - for bridge mode connections: 1. Select the specific connection type from the drop-down menu. The available bridge mode connection and encapsulation types are 1483 bridged ip llc and 1483 bridged ip vc-mux. 2. If you ar...

  • Page 28

    C54apra2+ / c54aprb2+ wireless adsl router user guide 20 using the setup wizard - for wireless lan connections: 1. Click the enable ap box to allow the router to operate in the wireless environment. 2. The ssid identifies members of the service set. Accept the default name or change it to something ...

  • Page 29

    C54apra2+ / c54aprb2+ wireless adsl router user guide 21 using the setup wizard - finish and restart finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the restart button to save the new configuration...

  • Page 30: Basic Wireless Lan Setup

    C54apra2+ / c54aprb2+ wireless adsl router user guide 22 basic wireless lan setup to configure the router’s basic configuration settings without running the setup wizard, you can access the windows used to configure wireless, wan, lan, dhcp, dns, and dynamic dns settings directly from the home direc...

  • Page 31: Wireless Security

    C54apra2+ / c54aprb2+ wireless adsl router user guide 23 wireless security in the wireless settings window, select the type of security you want to configure. The window will change to present the settings specific to the method being configured. The router’s wireless security options include three ...

  • Page 32

    C54apra2+ / c54aprb2+ wireless adsl router user guide 24 1. Make sure the enable ap checkbox at the top of the window has been ticked. 2. Click the enable wep wireless security checkbox. 3. From the drop-down menu, select an authentication type: open, shared, or both. 4. Select a key by clicking a r...

  • Page 33

    C54apra2+ / c54aprb2+ wireless adsl router user guide 25 wireless settings window – wpa enter the appropriate parameters for the type of key selected from this window: • group key interval: the time (in seconds) after which the group key is changed automatically (1-99999). • 802.1x ip address: the i...

  • Page 34: Wan Configuration

    C54apra2+ / c54aprb2+ wireless adsl router user guide 26 wan configuration to configure the router’s basic configuration settings without running the setup wizard, you can access the windows used to configure wan, lan, dhcp, and dns settings directly from the home directory. To access the wan settin...

  • Page 35: Dynamic Ip Address

    C54apra2+ / c54aprb2+ wireless adsl router user guide 27 for bridged connections it will be necessary for most users to install additional software on any computer that will the router for internet access. The additional software is used for the purpose of identifying and verifying your account, and...

  • Page 36

    C54apra2+ / c54aprb2+ wireless adsl router user guide 28 wan settings window – dynamic ip address to configure a dynamic ip address connection for the wan, follow these steps:.

  • Page 37

    C54apra2+ / c54aprb2+ wireless adsl router user guide 29 1. Choose the dynamic ip address option from the wan settings pull-down menu. 2. Under the atm vc settings at the top of the window should not be changed unless you have been instructed to change them. However, if you are instructed to change ...

  • Page 38: Static Ip Address

    C54apra2+ / c54aprb2+ wireless adsl router user guide 30 additional settings for dynamic ip address connections: dynamic ip parameters description connection type this specifies the connection type and encapsulation method used for your dynamic ip address connection. The options available are bridge...

  • Page 39

    C54apra2+ / c54aprb2+ wireless adsl router user guide 31 wan settings window - static ip.

  • Page 40

    C54apra2+ / c54aprb2+ wireless adsl router user guide 32 to configure a static ip type connection for the wan, follow these steps: 1. Choose the static ip address option from the wan settings pull-down menu. 2. Under the atm vc settings at the top of the window should not be changed unless you have ...

  • Page 41

    C54apra2+ / c54aprb2+ wireless adsl router user guide 33 additional settings for static ip address connections: static ip parameters description connection type this specifies the connection type and the encapsulation method used for your static ip address connection. The options available are bridg...

  • Page 42: Pppoe/pppoa

    C54apra2+ / c54aprb2+ wireless adsl router user guide 34 pppoe/pppoa follow the instructions below to configure the router to use a pppoe or pppoa for the internet connection. Make sure you have all the necessary information before you configure the wan connection. Wan settings window – pppoe/pppoa.

  • Page 43

    C54apra2+ / c54aprb2+ wireless adsl router user guide 35 to set up a pppoe or pppoa connection: 1. If not already selected, choose the pppoe/pppoa option from the wan settings pull-down menu. Pppoe/pppoa is selected by default if you are configuring the router for the first time. 2. Under the atm vc...

  • Page 44

    C54apra2+ / c54aprb2+ wireless adsl router user guide 36 additional settings for pppoe/pppoa connections: pppoe/pppoa parameters description user name for ppp connections, a user name and password are used to identify and verify your account to the isp. Enter the user name for your adsl service acco...

  • Page 45

    C54apra2+ / c54aprb2+ wireless adsl router user guide 37 atm vc settings atm vc settings can be configured for all connection types in the wan configuration menu of the home directory. Atm vc settings in wan settings window the table below describes the atm vc settings used to configure a pppoe or p...

  • Page 46

    C54apra2+ / c54aprb2+ wireless adsl router user guide 38 atm settings for wan connection additional atm settings for pppoe or pppoa connections: atm parameters description service category the atm settings allow the user to adjust atm quality of service (qos) or traffic parameters to suit specific t...

  • Page 47: Lan

    C54apra2+ / c54aprb2+ wireless adsl router user guide 39 lan you can configure the lan ip address to suit your preference. Many users will find it convenient to use the default settings together with dhcp service to manage the ip settings for their private network. The ip address of the router is th...

  • Page 48: Dhcp

    C54apra2+ / c54aprb2+ wireless adsl router user guide 40 dhcp the dhcp server is enabled by default for the router’s ethernet lan interface. Dhcp service will supply ip settings to workstations configured to automatically obtain ip settings that are connected to the router though the ethernet port. ...

  • Page 49

    C54apra2+ / c54aprb2+ wireless adsl router user guide 41 to display the dhcp settings window, click the dhcp button in the home directory. Any active dhcp clients appear at the bottom of the window in the dhcp clients list. The ip address and mac address for active dhcp clients are displayed in the ...

  • Page 50

    C54apra2+ / c54aprb2+ wireless adsl router user guide 42 dhcp settings window with dhcp disabled.

  • Page 51

    C54apra2+ / c54aprb2+ wireless adsl router user guide 43 static ip on lan if the router has the dhcp server enabled it is possible to permanently assign ip addresses to workstations specified by their mac address. Up to five ip addresses may be assigned to five different devices. This will take the ...

  • Page 52: Dns

    C54apra2+ / c54aprb2+ wireless adsl router user guide 44 dns the router can be configured to relay dns settings from your isp or another available service to workstations on your lan. When using dns relay, the router will accept dns requests from hosts on the lan and forward them to the isp’s, or al...

  • Page 53: Dynamic Dns

    C54apra2+ / c54aprb2+ wireless adsl router user guide 45 dynamic dns the router supports ddns (dynamic domain name service). The dynamic dns service allows a dynamic public ip address to be associated with a static host name in any of the many domains, allowing access to a specified host from variou...

  • Page 54: Save Settings and Reboot

    C54apra2+ / c54aprb2+ wireless adsl router user guide 46 save settings and reboot when you have configured the c54apra2+ / c54aprb2+ with the settings you desire, make sure you save those settings. To save the system configuration settings, click the tools tab. You will be presented first with the a...

  • Page 55: Multiple Virtual Connections

    C54apra2+ / c54aprb2+ wireless adsl router user guide 47 multiple virtual connections the router supports multiple virtual connections. Up to eight pvcs to eight separate destinations can be created and operated simultaneously utilizing the same bandwidth. Additional pvc connections can be added for...

  • Page 56

    C54apra2+ / c54aprb2+ wireless adsl router user guide 48 in the example below, a new pvc (pvc1) has been added using the wan settings window. The connection is setup as a bridged connection. New pvc (pvc1) appears in atm vcs list [advanced > atm vcc] the new pvc that appears can be configured separa...

  • Page 57: Advanced Settings

    C54apra2+ / c54aprb2+ wireless adsl router user guide 49 4 advanced settings directory configuration and read-only windows home click the home tab to access the setup wizard, wireless settings, wan settings, lan management ip configuration, and dhcp settings for lan setup, dns configuration, and dyn...

  • Page 58: Upnp

    C54apra2+ / c54aprb2+ wireless adsl router user guide 50 upnp upnp supports zero-configuration networking and automatic discovery for many types of networked devices. When enabled, it allows other devices that support upnp to dynamically join a network, obtain an ip address, convey its capabilities,...

  • Page 59: Virtual Server

    C54apra2+ / c54aprb2+ wireless adsl router user guide 51 virtual server use the virtual server window to set up single-port, trigger port or static-port range forwarding rules applied to inbound (wan-to-lan) traffic. The virtual server function allows remote users to access services on your lan such...

  • Page 60

    C54apra2+ / c54aprb2+ wireless adsl router user guide 52 there are many different pre-configured rules available for specific functions such as internet gaming, vpn, streaming and interactive multi-media, standard tcp/ip protocols, reserved ports, p2p, network management applications, and so on. You...

  • Page 61

    C54apra2+ / c54aprb2+ wireless adsl router user guide 53 rule management window 2. Type a rule name in the space provided. 3. Select the port protocol from the pull-down menu - you may select tcp, udp or both (tcp/udp). 4. Configure a range of ports for forwarding. Type the lowest numbered port in t...

  • Page 62: Lan Clients

    C54apra2+ / c54aprb2+ wireless adsl router user guide 54 lan clients the lan clients window is used when establishing port forwarding rules in the virtual server and filters windows. This window can be accessed directly by clicking on the lan clients button in the advanced tab. In order to use these...

  • Page 63: Snmp

    C54apra2+ / c54aprb2+ wireless adsl router user guide 55 snmp simple network management protocol is a standard for internetwork and intranetwork management. Snmp management window configure these parameters for snmp on the router: snmp category parameters snmp management this is used to enable or di...

  • Page 64: Filters

    C54apra2+ / c54aprb2+ wireless adsl router user guide 56 filters filter rules in the router are put in place to allow or block specified traffic. The filter rules however can be used in a single direction to examine and then allow or deny traffic for inbound (wan to lan) or outbound (lan to wan) rou...

  • Page 65

    C54apra2+ / c54aprb2+ wireless adsl router user guide 57 the parameters described in the table below are used to set up filter rules. Click the apply button to put the new rule into effect. Any filter rule configured in the menu will appear in the filters list with the new settings. The router must ...

  • Page 66: Bridge Filters

    C54apra2+ / c54aprb2+ wireless adsl router user guide 58 bridge filters bridge filters are used to block or allow various types of packets through the wan interface. This may be done for security or to improve network efficiency. The rules are configured for individual devices based on mac address. ...

  • Page 67: Routing

    C54apra2+ / c54aprb2+ wireless adsl router user guide 59 routing use static routing to specify a route used for data traffic within your ethernet lan or to route data on the wan. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway. Routing...

  • Page 68: Dmz

    C54apra2+ / c54aprb2+ wireless adsl router user guide 60 dmz since some applications are not compatible with nat, the router supports use of a dmz ip address for a single host on the lan. This ip address is not protected by nat and will therefore be visible to agents on the internet with the right t...

  • Page 69: Firewall

    C54apra2+ / c54aprb2+ wireless adsl router user guide 61 firewall firewall configuration window when dos, port scan, or service filtering protection is enabled, it will create a firewall policy to protect your network against the following: dos protection port scan protection service filtering • syn...

  • Page 70: Rip

    C54apra2+ / c54aprb2+ wireless adsl router user guide 62 a dos "denial-of-service" attack is characterized by an explicit attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing legitimate network traf...

  • Page 71: Adsl

    C54apra2+ / c54aprb2+ wireless adsl router user guide 63 adsl the adsl configuration window allows the user to set the configuration for adsl protocols. For most adsl accounts the default settings adsl2+(multi-mode) will work. This configuration works with all adsl implementations. If you have been ...

  • Page 72

    C54apra2+ / c54aprb2+ wireless adsl router user guide 64 atm vc setting window to configure an existing pvc configuration set, click the corresponding notepad icon in the right-hand column of the atm vcs list. The pvcs current settings appear above in the entry fields of the atm vc setting window. C...

  • Page 73: Wireless Management

    C54apra2+ / c54aprb2+ wireless adsl router user guide 65 wireless management the wireless management window located in the advanced directory is used to control mac address access to the wireless access point and to view a list of mac addresses that are currently associated with the access point. Th...

  • Page 74

    C54apra2+ / c54aprb2+ wireless adsl router user guide 66 configure wireless access control to create a list of mac addresses that are banned or allowed association with the wireless access point: 1. Click in the enable access list option box to select it. 2. Select the action to perform on the mac a...

  • Page 75: Wireless Performance

    C54apra2+ / c54aprb2+ wireless adsl router user guide 67 wireless performance if you want to tweek wireless settings, click the wireless performance windowbutton in the advanced directory note it is recommended for most users to use the default wireless lan performance settings. Any changes made to ...

  • Page 76: Tools

    C54apra2+ / c54aprb2+ wireless adsl router user guide 68 tools click the tools tab to reveal the window buttons for various functions located in this directory. The administrator settings window is the first item in the tools directory. This window is used to change the system password used to acces...

  • Page 77: Change System Password

    C54apra2+ / c54aprb2+ wireless adsl router user guide 69 administrator settings window change system password under the administrator heading, type the new password and confirm password to be certain you have typed it correctly. Click the apply button to activate the new password. The system user na...

  • Page 78: Remote Log

    C54apra2+ / c54aprb2+ wireless adsl router user guide 70 remote log us the remote log settings window to set up logging to servers or computers that are located outside the lan or subnet of the router. Remote log settings window select the log level from the pull-down menu. The levels available are:...

  • Page 79: System

    C54apra2+ / c54aprb2+ wireless adsl router user guide 71 system save or load configuration file once you have configured the router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the syste...

  • Page 80: Firmware

    C54apra2+ / c54aprb2+ wireless adsl router user guide 72 firmware note performing a firmware upgrade can sometimes change the configuration settings. Be sure to back-up the router’s configuration settings before upgrading the firmware. Use the firmware upgrade window to load the latest firmware for ...

  • Page 81: Miscellaneous

    C54apra2+ / c54aprb2+ wireless adsl router user guide 73 miscellaneous to perform a statndard ping test for network connectivity, click the misc. Window button in the tools directory to view the miscellaneous configuration window. Miscellaneous configuration window ping test the ping test functions ...

  • Page 82: Test

    C54apra2+ / c54aprb2+ wireless adsl router user guide 74 test the diagnostic test window is used to test connectivity of the router. A ping test may be done through the local or external interface to test connectivity to known ip addresses. The diagnostics feature executes a series of test of your s...

  • Page 83: Status

    C54apra2+ / c54aprb2+ wireless adsl router user guide 75 status use these windows to view system information and monitor performance. Device info use the device information window to quickly view basic current information about the lan and wan interfaces and device information including firmware ver...

  • Page 84: Dhcp Clients

    C54apra2+ / c54aprb2+ wireless adsl router user guide 76 dhcp clients dhcp clients window.

  • Page 85: Log

    C54apra2+ / c54aprb2+ wireless adsl router user guide 77 log the system log displays chronological event log data. Use the navigation buttons to view or scroll log pages. You may also save a simple text file containing the log to your computer. Click the save log button and follow the prompts to sav...

  • Page 86: Statistics

    C54apra2+ / c54aprb2+ wireless adsl router user guide 78 statistics use the traffic statistics window to monitor traffic on the ethernet, adsl, or wireless connection. Select the interface for which you want to view packet statistics and the information will appear below. Traffic statistics window c...

  • Page 87: Adsl

    C54apra2+ / c54aprb2+ wireless adsl router user guide 79 adsl use the adsl status window for troubleshooting the adsl connection. Adsl status information help the help tab will give basic information referring to various windows located in the router. To view a specific section, click on its hyperli...

  • Page 88: Technical Specifications

    C54apra2+ / c54aprb2+ wireless adsl router user guide 80 a technical specifications general standards: adsl standards • ansi t1.413 issue 2 • itu g.992.1 (g.Dmt) annexa • itu g.992.2 (g.Lite) annex a • itu g.994.1 (g.Hs) • itu g.992.5 annex a adsl2 standards • itu g.992.3 (g.Dmt.Bis) annex a • itu g...

  • Page 89

    C54apra2+ / c54aprb2+ wireless adsl router user guide 81 physical and environmental dc inputs: power adapter: input: 120v ac 60hz output: 12v ac, 1200ma power consumption: 12 watts (max) operating temperature: 0° to 40°c storage temperature -20° to 70°c humidity: 5% to 95% (non-condensing) dimension...

  • Page 90

    C54apra2+ / c54aprb2+ wireless adsl router user guide 82 wireless modulation ieee 802.11b: dqpsk, dbpsk, dsss, and cck ieee 802.11g: bpsk, qpsk, 16qam, 64qam, ofdm frequency 2400 ~ 2484.5mhz ism band channels 11 channels for united states 13 channels for european countries 13 channels for japan wire...

  • Page 91

    C54apra2+ / c54aprb2+ wireless adsl router user guide 83 b configuring ip settings on your computer in order to configure your system to receive ip settings from the router it must first have the tcp/ip protocol installed. If you have an ethernet port on your computer, it probably already has tcp/ip...

  • Page 92

    C54apra2+ / c54aprb2+ wireless adsl router user guide 84 configure windows xp for dhcp use the following steps to configure a computer running windows xp to be a dhcp client. 1. From the start menu on your desktop, go to settings, then click on network connections. 2. In the network connections wind...

  • Page 93

    C54apra2+ / c54aprb2+ wireless adsl router user guide 85 3. In the general tab of the local area connection properties menu, highlight internet protocol (tcp/ip) under “this connection uses the following items:” by clicking on it once. Click on the properties button. 4. Select “obtain an ip address ...

  • Page 94

    C54apra2+ / c54aprb2+ wireless adsl router user guide 86 windows 2000 first, check for the ip protocol and, if necessary, install it: 1. In the windows task bar, click the start button, point to settings, and then click control panel. 2. Double-click the network and dial-up connections icon. 3. In t...

  • Page 95

    C54apra2+ / c54aprb2+ wireless adsl router user guide 87 windows 95 and windows 98 first, check for the ip protocol and, if necessary, install it: 1. In the windows task bar, click the start button, point to settings, and then click control panel. Double-click the network icon. 2. The network dialog...

  • Page 96

    C54apra2+ / c54aprb2+ wireless adsl router user guide 88 your computer is now ready to use the router’s dhcp server. Windows nt 4.0 workstations first, check for the ip protocol and, if necessary, install it: 1. In the windows nt task bar, click the start button, point to settings, and then click co...

  • Page 97: Low Pass Filters For Dsl

    C54apra2+ / c54aprb2+ wireless adsl router user guide 89 c low pass filters for dsl most adsl clients will be required to install a simple device that prevents the adsl line from interfering with regular telephone services. These devices are commonly referred to as microfilters or low pass filters. ...

  • Page 98

    C54apra2+ / c54aprb2+ wireless adsl router user guide 90 three port filter another style of filter is installed at the same point where the router connects to the telephone line. Only a single filter is required. The connection ports are typically labeled as follows: line - this port connects to the...

  • Page 99

    91 licensing information this conceptronic product c54apra2+ / c54aprb2+ includes copyrighted third-party software licensed under the terms of the gnu general public license. Please see the gnu general public license for the exact terms and conditions of this license. Specially, the following parts ...

  • Page 100

    C54apra2+ / c54aprb2+ wireless adsl router user guide 92 gnu general public license version 2, june 1991 copyright (c) 1989, 1991 free software foundation, inc. Temple place, suite 330, boston, ma 02111-1307 usa everyone is permitted to copy and distribute verbatim copies of this license document, b...

  • Page 101

    93 terms and conditions for copying, distribution and modification 0. This license applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this general public license. The "program", below, refers to any such program...

  • Page 102

    C54apra2+ / c54aprb2+ wireless adsl router user guide 94 thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the program. ...

  • Page 103

    95 6. Each time you redistribute the program (or any work based on the program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the program subject to these terms and conditions. You may not impose any further restrictions on the recipients' e...

  • Page 104

    C54apra2+ / c54aprb2+ wireless adsl router user guide 96 11. Because the program is licensed free of charge, there is no warranty for the program, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other parties provide the program "as is"...