CONCORD NEO Manual

Other manuals for NEO: User Manual

Summary of NEO

  • Page 1

    Deutsch 03 english 25 franÇais 47 espaÑol 69 italiano 91 portuguÊs 113 nederlands 135 norsk 157 dansk 179 suomi 201 norm din en 1888:2012 standard din en 1888:2012 norme din en 1888:2012 norma din en 1888:2012 szabvány din en 1888:2012.

  • Page 2

    11 13 14 16 12 17 15 19 18 04 01 05 06 03 02 07 09 08 10

  • Page 3

    _ english 25 overview 26 thank you! 28 please note 28 attaching and removing the back wheels 30 using the parking brake 31 locking the front wheels 31 unfolding and folding 32 attaching and removing the seat frame (profix system) 33 setting the seat angle 35 using the safety bar 36 using the sun sha...

  • Page 4

    11 handlebar 13 parking brake lever 27 _ overview 26 14 unlocking lever with safety button 16 profix adapter 12 adjustment handle 17 footrest unlocking button 15 safety bar 19 pushbutton 18 transport lock 04 wind protector 01 sun shade 05 safety bar unlocking button 06 profix unlocking lever 03 seat...

  • Page 5

    29 • the parking device shall be engaged when placing and removing the children. • any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle. • you should take the child out of the concord neo whenever you have to m...

  • Page 6

    To attach the back wheel, press and hold the pushbutton as you push the wheel onto the concord neo axle, and let it click audibly into place. 31 to remove a back wheel, press and hold the pushbutton ( 19 ) and pull the wheel off the axle. Warning! The occurrence of cutting, pressure and crushing poi...

  • Page 7

    _ attaching and removing the seat frame (profix system) the concord neo is equipped with profix adapters ( 16 ). These adapters are used to attach the concord neo seat frame to the chassis. You can secure the seat frame to the chassis so that it is either front or rear facing. To do this, insert the...

  • Page 8

    35 _ setting the seat angle you can set the seat frame’s angle of inclination to several positions. To do this, pull the adjustment handle ( 12 ) on the top edge of the seat frame and adjust the seat angle until it engages in the required position. Warning • an additional position ( p ) allows the c...

  • Page 9

    _ using the sun shade to secure the concord neo sun shade ( 01 ) onto the seat frame, push it from above onto the relevant plastic receivers on the seat frame. Then join the zip on the inside of the sun shade to the seat cover. To remove the sun shade, undo the zip and pull the sun shade upwards and...

  • Page 10

    _ adjusting the footrest you can adjust the footrest ( 07 ) to five different positions. To do this, simultaneously press the left and right unlocking buttons ( 17 ). Then adjust the footrest until it engages in the required position. Warning! Never permit your child to stand up on the footrest. 39 ...

  • Page 11

    Take care that your child is always strapped in, with the buckle fastened, whenever you go out with the pushchair. Adjust the straps so that they are taut and lie close against the child. To adjust the strap length, slide the strap clasps up or down. Check that the straps are not twisted. The childp...

  • Page 12

    _ using the wind protector the concord neo is equipped with an integrated wind protector ( 04 ). To use it, undo the zip on the safety bar and stretch the wind protector across the footrest. 43 42 _ using the rain cover to use the rain cover, pull it from the top to the bottom across the seat frame....

  • Page 13

    _ putting on, removing and laundering the cover the different parts of the cover of the concord neo are joined to each other by means of press-studs, velcro and zip fasteners, and are attached to the rods. If you wish to remove the cover, first loosen all these fastenings. Make sure all the fastener...

  • Page 14

    46 _ guarantee the guarantee begins on the day of purchase. The guarantee period corresponds to the statutory warranty period in the end-user’s country concerned. At the manufacturer’s discretion, the guarantee shall cover rectification, replacement or a price reduction. The guarantee is valid for t...

  • Page 15

    Concord gmbh industriestraße 25 95346 stadtsteinach germany phone +49 (0)9225.9550-0 fax +49 (0)9225.9550-55 info@concord.De www.Concord.De _ deutsch _ english _ franÇais _ espaÑol _ italiano _ portuguÊs _ nederlands _ norsk _ dansk _ suomi einbau- und bedienungsanleitung instructions for attachment...