1. DL manuals
  2. Conel
  3. Network Router
  4. ER 75i SL
  5. User Manual

Conel ER 75i SL User Manual

Manual is about: Conel EDGE router User's guide

Summary of ER 75i SL

  • Page 1

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De edge router er 75i, er 75i duo and er 75i sl user’s guide.

  • Page 2: Contents

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De contents 2 contents 1. Safety instructions 5 2. Description of the er 75i, er 75i duo and er 75i sl routers 6 2.1. Introduction 6 2.2. Delivery identification 6 2.3. Antenna connection 8 2.4....

  • Page 3

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De contents 3 4.20. Expansion port configuration 61 4.21. Start-up script 62 4.22. Automatic update configuration 62 4.23. Change password 63 4.24. Set real time clock 63 4.25. Set sms service c...

  • Page 4: Symbols Used

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De contents 4 symbols used danger – important notice, which may have an influence on the user’s safety or the function of the device. Attention – notice of possible problems, which can arise in ...

  • Page 5: 1. Safety

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De safety instructions 5 1. Safety instructions please, observe the following instructions: • the communication module must be used in compliance with any and all applicable international and na...

  • Page 6: Routers

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 6 2. Description of the er 75i, er 75i duo and er 75i sl routers 2.1. Introduction edge router is a compact electronic device based on the module which enables data transfers usin...

  • Page 7

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 7 specimen label of optional port1: trade name of port1 type name of port1 power supply expansion port rs232 xc-232 internal power supply expansion port rs485-rs422 xc-485-422 int...

  • Page 8

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 8 router er 75i is standardly designed for: • mounting to a panel using through holes (only version er 75i and er 75i duo), • or possibility to be put on a worktop, • mounting ont...

  • Page 9

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 9 2.6. Technical parameters gsm module mc75i complies with standards en 301 511, v9.0.2 en etsi 301 489-1 v1.9.1 en 60950-1:06 ed.2 frequency bands egsm850, egsm900, gsm1800 and g...

  • Page 10

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 10 2.7. Description of individual components of the router 2.7.1. Gsm/gprs/edge module the mc75i oem module is used for gsm network wireless communication. It is integrated into t...

  • Page 11

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 11 2.8. User interfaces (connectors) on the back panel of the router the following connectors are located: • one rj12 connector or mrt9 (pwr) – for connection of the power supply ...

  • Page 12

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 12 rear panel er 75i sl front panel er 75i sl.

  • Page 13

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 13 2.8.1. Connection of the pwr supply connector • panel socket rj12. Pin number signal mark description 1 +un positive pole of dc supply voltage (+10 to +30 vdc) 2 nc signal not ...

  • Page 14

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 14 2.8.2. Connection of the eth connector panel socket rj45. Pin number signal mark description data flow direction 1 txd+ transmit data – positive pole input/output 2 txd- transm...

  • Page 15

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 15 2.8.4. Connection of the optional connector port1 panel socket rj45. 2.8.4.1. Expansion port rs232 (rs232 – dce – data communication equipment) pin no. Signal name description ...

  • Page 16

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 16 the router connection to equipment with full-value rs232 interface: 2.8.4.2. Expansion port rs485 pin no. Signal name description data flow direction 1 sgnd signal and power su...

  • Page 17

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 17 circuit example of the equipment with a router with data length more than 10 m: at rs485 data cable more then 10m it is need to use overvoltage protection on the router side! 2...

  • Page 18

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 18 circuit example of the equipment with a router with data length more than 10 m: at rs422 data cable more then 10m it is need to use overvoltage protection on the router side!.

  • Page 19

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 19 2.8.4.4. Expansion port mbus pin no. Signal name description data flow direction 1 sgnd signal and power supply ground 2 sgnd signal and power supply ground 3 txrx- mbus b (-) ...

  • Page 20

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 20 2.8.4.5. Expansion port cnt pin number signal mark description data flow direction 1 bin1/cnt1 binary input/counter input input 2 bin2/cnt2 binary input/counter input input 3 b...

  • Page 21

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 21 2.9. Technical specification of optional port1 • expansion port rs232 expansion port rs232 power supply internal .... Operating temperature -20 .. +55 c environment storage tem...

  • Page 22

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 22 the jumper circuitry for internal supply the jumper circuitry for external supply the jumper circuitry for rs485 the jumper circuitry for rs422 • expansion port mbus name of pr...

  • Page 23

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 23 • expansion port cnt name of product expansion port cnt internal …. Sleep 100 µa (counter is functional) power supply operation 2 ma operating temperature -20 .. +55 c environm...

  • Page 24

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 24 2.10. Modem status indication on the front and back panel of the modem there are altogether four led indicators, which inform on the modem status. Panel color description descr...

  • Page 25

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 25 2.12. Mechanical external dimensions and mounting recommendations.

  • Page 26

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 26 for the majority of applications with a built-in modem in a switch board it is possible to recognize two sorts of environments: • non public and industry environment of low vol...

  • Page 27

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De description 27 • sufficient space must be left before individual connectors for handling of cables, • for correct function of the modem we recommend to use in switch - board earth- bonding di...

  • Page 28: 3. Expansion

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De expansion port mounting 28 3. Expansion port mounting 3.1. Expansion port mounting for er 75i and er 75i duo router attention! Expansion port includes when the router is switched off. After u...

  • Page 29

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De expansion port mounting 29 parts list and description part description number 1 edge router motherboard 1 2 expansion port port1 1 3 box top part 1 4 box bottom part 1 5 rear head 1 6 front h...

  • Page 30

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De expansion port mounting 30 3.2. Expansion port mounting for er 75i sl router attention! Expansion port includes when the router is switched off. After unscrewing four screws (position 10) on ...

  • Page 31

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De expansion port mounting 31 parts list and description part description number 1 edge router motherboard 1 2 expansion port port1 1 3 left box part 1 4 right box part 1 5 rear head 1 6 front h...

  • Page 32

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 32 4. Configuration setting over web browser attention! If the sim card is not inserted in the router, then it is impossible to operate. The inserted sim card must have activate...

  • Page 33

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 33 by each of the interfaces are then shown the following information • hwaddr – hardware (unique) address of networks interface • inet – own ip address • p-t-p – ip address sec...

  • Page 34

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 34 4.2. Dhcp status information about ip addresses, which was leased to the router by the dhcp server, is possible to find in menu in sum dhcp: • lease 192.168.1.2 (generally ip...

  • Page 35

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 35 4.5. Dyndns status dyndns up - dating entry result on server www.Dyndns.Org can be called up in option dyndns item in the menu. 4.6. System log in case of any problems with c...

  • Page 36

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 36 4.7. Lan configuration to enter the network configuration, select the lan menu item. In the first part of the window it is possible to define the network interface ip address...

  • Page 37

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 37 example of the network interface with dynamic and static dhcp server: 192.168.1.3 192.168.1.4 eth 192.168.1.2 gsm/gprs 192.168.1.10 01-23-45-67-89-ab 192.168.1.11 01-54-68-18...

  • Page 38

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 38 4.8. Vrrp configuration to enter the vrrp configuration select the vrrp menu item. Vrrp protocol (virtual router redundancy protocol) is a technique, by which it is possible ...

  • Page 39

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 39 example of the vrrp protocol: 4.9. Gprs configuration to enter the gprs connection configuration select the gprs menu item. If the create gprs connection option is selected, ...

  • Page 40

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 40 the choice get dns address from operator is given for easier configuration on client side. If this field is filled in, then the er 75i tries to get an ip address of primary a...

  • Page 41

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 41 the changes in settings will apply after pressing the apply button. Annotation: • mtu (maximum transmission unit) – it is the identifier of the maximum size of packet, which ...

  • Page 42

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 42 4.10. Firewall configuration by the help of a firewall it is possible to set ip addresses from which are possible to remotely access the router. The choice allow remote acces...

  • Page 43

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 43 4.11. Nat configuration to enter the network address translation configuration, select the nat menu item. By checking off the send all incoming packets to default server item...

  • Page 44

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 44 in these configurations it is important to have marked choice of send all remaining incoming packets it default server, ip address in this case is the address of the device b...

  • Page 45

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 45 in this configuration equipment wired behind the er 75i defines the address server ip address. The er 75i replies, while ping on address of sim card. Access on web interface ...

  • Page 46

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 46 renegotiate period (reauthorization) of the openvpn tunnel. This parameter is possible to set only at username/password authentication or at x.509 certificate using. By param...

  • Page 47

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 47 example of the openvpn tunnel configuration: openvpn tunnel configuration: a b protocol udp udp udp port 1194 1194 remote ip address: 10.0.0.2 10.0.0.1 remote subnet: 192.168...

  • Page 48

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 48 4.13. Ipsec tunnel configuration ipsec tunnel configuration can be called up by option ipsec item in the menu. Ipsec tunnel allows protected connection of two networks lan to...

  • Page 49

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 49.

  • Page 50

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 50 example of the ipsec tunnel configuration: ipsec tunnel configuration: a b remote ip address: 10.0.0.2 10.0.0.1 remote subnet: 192.168.2.0 192.168.1.0 remote subnet mask: 255...

  • Page 51

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 51 address), internal ip address of the remote side of the tunnel (remote internal ip address), address of the network behind the remote side of the tunnel (remote subnet) and t...

  • Page 52

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 52 in the window it is possible to define l2tp tunnel mode (mode) on the router side, in case of client ip address of server (server ip address), start ip address in range, whic...

  • Page 53

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 53 l2tp tunnel configuration: a b mode l2tp server l2tp client server ip address --- 10.0.0.1 client start ip address: 192.168.1.2 --- client end ip address: 192.168.1.254 --- l...

  • Page 54

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 54 4.17. Ntp client configuration ntp client configuration can be called up by option ntp item in the menu. In the window can be defined the address prime (primary ntp server ad...

  • Page 55

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 55 4.18. Snmp configuration to enter the snmp configuration it is possible with snmp agent ver.1 configuration which sends information about the router, eventually about the sta...

  • Page 56

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 56 .1.3.6.1.4.1.30140.2.2. 47. Vif – value information field .1.3.6.1.4.1.30140.2.2. 47. Measured value the meter address can be from range 0..254 when 254 is broadcast. Example...

  • Page 57

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 57 it is possible to send sms in the form: sms description go online sim 1 switch to sim1 card go online sim 2 switch to sim2 card go online switch router in online mode go offl...

  • Page 58

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 58 er 75i (unit id) has lost ppp connection. Ip address xxx.Xxx.Xxx.Xxx configuration of sending this sms is following:.

  • Page 59

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 59 example of the router onfiguration for sms sending via serial interface: the sms is possible to do for example in hyperterminal program. After establishing connection with th...

  • Page 60

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 60 it is possible to find the new sms by the help of command at+cmgl=all. This command reproaches all sms messages. At+cmgl=all enter +cmgl: , ,, ,, sms text. +cmgl: 1,“rec unre...

  • Page 61

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 61 4.20. Expansion port configuration the expansion port configuration can be called up by airbrush option external port in menu. Inside the window can be defined baudrate, numb...

  • Page 62

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 62 4.21. Start-up script in the window startup script it is possible to create own scripts which will be executed after all initial scripts. This script is not stored or restore...

  • Page 63

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 63 automatically and it isn’t needed to enter this. By parameter unit id enabled it defines the concrete configuration name which will be download to the router. When using para...

  • Page 64

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 64 4.25. Set sms service center address in some cases it is need to set phone number of the sms service centre because of sms sending. This parameter can not be set when the sim...

  • Page 65

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 65 4.29. Restore configuration in case it is needed to restore the router configuration, it is possible in restore configuration menu item to check configuration by help browse ...

  • Page 66

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 66 4.32. Default settings 4.32.1. Lan configuration 4.32.2. Vrrp configuration 4.32.3. Firewall configuration.

  • Page 67

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 67 4.32.4. Gprs configuration 4.32.5. Nat configuration.

  • Page 68

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 68 4.32.6. Openvpn tunnel configuration.

  • Page 69

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 69 4.32.7. Ipsec tunnel configuration.

  • Page 70

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 70 4.32.8. Gre tunnel configuration 4.32.9. L2tp configuration 4.32.10. Dyndns configuration 4.32.11. Ntp configuration.

  • Page 71

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 71 4.32.12. Snmp configuration 4.32.13. Sms configuration.

  • Page 72

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 72 4.32.14. External port configuration 4.32.15. Startup script 4.32.16. Automatic update.

  • Page 73

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De configuration 73 5. Configuration setting over telnet attention! If the sim card isn’t included in the router, it is impossible for the router to operate. The included sim card must be activa...

  • Page 74: 6. Driver

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De drivers 74 6. Driver installation connect the usb cable to the router and to the pc. Windows detects router as a new usb modem, starts the add hardware wizard and requests the driver for "mc7...

  • Page 76: 7.  Control By At Commands

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De at commands, problems, reference and faq 76 7. Control by at commands the router is controlled and programmed by at commands. Structure of the at command match used module mc75i. At commands ...

  • Page 77: 11. Customer’S Care

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De at commands, problems, reference and faq 77 ¾ dyndns not function. ƒ in private apn not functional. ƒ if the same ip address is recorded in your canonic name as dynamically assign address, it...

  • Page 78

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De disposal informations 78 12. Product disposal information the weee (waste electrical and electronic equipment: 2002/96/ec) directive has been introduced to ensure that electrical/electronic p...

  • Page 79

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De guarantee claim guidelines 79 13. Guarantee claim guidelines dear customer, the product that you have purchased was tested by the manufacturer and, before it was sold, the product’s functions...

  • Page 80

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De guarantee claim guidelines 80 hereupon onto the seller, and the ownership of the new product, onto the buyer. A new guarantee period starts running from the date of acceptance of the new prod...

  • Page 81

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De guarantee claim guidelines 81 other guarantee claim conditions the fact that the object of the guarantee claim does not correspond to parameters that have been set for other similar types of ...

  • Page 82: 14. Guarantee Certificate

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De guarantee certificate 82 14. Guarantee certificate type of the device serial number guarantee period (in months) seller date of sale stamp of the seller.

  • Page 83

    Lucom gmbh * ansbacher str. 2a * 90513 zirndorf * tel. 09127/59 460-10 * fax. 09127/59 460-20 * www.Lucom.De guarantee certificate 83 1 2 3 4 5 date of reception of the guarantee claim by the seller number of the guarantee claim report date of reception of the device into the repair shop date of com...