- DL manuals
- Congatec
- Computer Hardware
- 046901
- User manual
Congatec 046901 User manual
Summary of 046901
Page 1
Copyright © 2013 congatec ag tu87m10 1/108 com express™ conga-tc87 4th generation intel ® core™ i7, i5, i3 and mobile intel ® celeron single chip ultra low tdp processors user’s guide revision 1.0
Page 2: Revision History
Copyright © 2013 congatec ag tu87m10 2/108 revision history revision date (yyyy.Mm.Dd) author changes 0.1 2013.11.14 aem • preliminary release 1.0 2014.03.27 aem • updated section 2.5 “power consumption”. • updated section 3 “block diagram”. • corrected the name of the congatec board controller in s...
Page 3: Preface
Copyright © 2013 congatec ag tu87m10 3/108 preface this user’s guide provides information about the components, features, connectors and bios setup menus available on the conga-tc87. It is one of three documents that should be referred to when designing a com express™ application. The other referenc...
Page 4
Copyright © 2013 congatec ag tu87m10 4/108 symbols the following symbols are used in this user’s guide: warning warnings indicate conditions that, if not observed, can cause personal injury. Caution cautions warn the user about how to prevent damage to hardware or loss of data. Note notes call atten...
Page 5
Copyright © 2013 congatec ag tu87m10 5/108 trademarks product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property of their respective trademark holders. These trademark holders are not affiliated with congatec ag, our...
Page 6
Copyright © 2013 congatec ag tu87m10 6/108 certification congatec ag is certified to din en iso 9001 standard. Technical support congatec ag technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and implemen...
Page 7: Contents
Copyright © 2013 congatec ag tu87m10 7/108 contents 1 introduction ..................................................................... 10 2 specifications ........................................................................... 12 2.1 feature list ..................................................
Page 8
Copyright © 2013 congatec ag tu87m10 8/108 7.2.5 intel ® virtualization technology ................................................ 41 7.2.6 thermal management .............................................................. 41 7.3 acpi suspend modes and resume events ............................ 42 7...
Page 9: List of Tables
Copyright © 2013 congatec ag tu87m10 9/108 list of tables table 1 feature summary .................................................................... 12 table 2 display combination (u-processor line) .................................. 30 table 3 signal tables terminology descriptions .................
Page 10: Introduction
Copyright © 2013 congatec ag tu87m10 10/108 1 introduction com express™ concept com express™ is an open industry standard defined specifically for coms (computer on modules). Its creation provides the ability to make a smooth transition from legacy interfaces to the newest technologies available tod...
Page 11
Copyright © 2013 congatec ag tu87m10 11/108 of different performance class or form factor size modules. Simply unplug one module and replace it with another; no redesign is necessary. Conga-tc87 options information the conga-tc87 is currently available in four variants. This user’s guide describes a...
Page 12: Specifications
Copyright © 2013 congatec ag tu87m10 12/108 2 specifications 2.1 feature list table 1 feature summary form factor based on com express™ standard pinout type 6 rev. 2.1 (compact size 95 x 95 mm). Processor intel ® core™ i7-4650u 1.7 ghz dual core™ with 4-mbyte intel ® smart cache intel ® core™ i5-430...
Page 13
Copyright © 2013 congatec ag tu87m10 13/108 note some of the features mentioned in the above feature summary are optional. Check the article number of your module and compare it to the option information list on page 11 of this user’s guide to determine what options are available on your particular ...
Page 14
Copyright © 2013 congatec ag tu87m10 14/108 2.4 supply voltage standard power • 12v dc ± 5% the dynamic range shall not exceed the static range. 2.4.1 electrical characteristics power supply pins on the module’s connectors limit the amount of input power. The following table provides an overview of ...
Page 15
Copyright © 2013 congatec ag tu87m10 15/108 2.5 power consumption the power consumption values listed in this document were measured under a controlled environment. The hardware used for testing includes a conga-tc87 module, conga-teval carrier board, hdmi-equipped lcd monitor, sata ssd drive, and u...
Page 16
Copyright © 2013 congatec ag tu87m10 16/108 processor information the tables below provide additional information about the power consumption data for each of the conga-tc87 variants offered. The values are recorded at various operating mode. 2.5.1 intel ® core™ i7-4650u 1.7 ghz dual core™ 4mb cache...
Page 17
Copyright © 2013 congatec ag tu87m10 17/108 2.5.3 intel ® core™ i3-4010u 1.7 ghz dual core™ 3mb cache conga-tc87 art. No. 046903 (gt2 graphics) intel ® core™ i3-4010u 1.7 ghz 2 core™ 3mb intel ® smart cache 22nm layout rev. Tu87lb1 /bios rev. Tu87r005 max turbo frequency n.A memory size 2 x 2gb oper...
Page 18
Copyright © 2013 congatec ag tu87m10 18/108 2.6.1 cmos battery power consumption rtc @ 20ºc voltage current integrated in the intel ® 8 series pch-lp 3v dc 9 µa the cmos battery power consumption value listed above should not be used to calculate cmos battery lifetime. You should measure the cmos ba...
Page 19: Block Diagram
Copyright © 2013 congatec ag tu87m10 19/108 3 block diagram intel® ult soc (cpu + pch) integrated intel hd graphics vector graphics 3d turbo boost 2.0 technology ht technology avx2 aes-ni sse4.2 tsx vt 64 architecture txt 2d dxva mpeg-2 video codecs apis hardware graphics accelerators displayport 1....
Page 20: Heatspreader
Copyright © 2013 congatec ag tu87m10 20/108 4 heatspreader an important factor for each system integration is the thermal design. The heatspreader acts as a thermal coupling device to the module and its aluminum plate is 4mm thick. The heatspreader is thermally coupled to the cpu and other heat gene...
Page 21
Copyright © 2013 congatec ag tu87m10 21/108 4.1 heatspreader dimensions note all measurements are in millimeters. Torque specification for heatspreader screws is 0.3 nm. Mechanical system assembly mounting shall follow the valid din/is0 specifications. Caution when using the heatspreader in a high s...
Page 22
Copyright © 2013 congatec ag tu87m10 22/108 5 connector subsystems rows a, b, c, d the conga-tc87 is connected to the carrier board via two 220-pin connectors (com express type 6 pinout) for a total of 440 pins connectivity. These connectors are broken down into four rows. The primary connector cons...
Page 23
Copyright © 2013 congatec ag tu87m10 23/108 5.1 primary connector rows a and b the following subsystems can be found on the primary connector rows a and b. 5.1.1 serial ata™ (sata) the conga-tc87 provides 4 sata interfaces (sata 0-3) externally via the intel ® 8 series pch-lp integrated in the mcp. ...
Page 24
Copyright © 2013 congatec ag tu87m10 24/108 of ethernet controller since it only has 3 led outputs, act#, link100# and link1000#. The gbe0_link# signal is a logic and of the gbe0_link100# and gbe0_link1000# signals on the conga-tc87 module. 5.1.5 lpc bus conga-tc87 offers the lpc (low pin count) bus...
Page 25
Copyright © 2013 congatec ag tu87m10 25/108 5.1.10 lcd (lvds/edp) the conga-tc87 offers an lvds/edp interface on the ab connector. The lvds/edp interface is by default configured to provide lvds signals. The interface can optionally be switched via the bios setup menu to support edp signals. The sin...
Page 26
Copyright © 2013 congatec ag tu87m10 26/108 5.1.12 power control pwr_ok power ok from main power supply or carrier board voltage regulator circuitry. A high value indicates that the power is good and the module can start its onboard power sequencing. Carrier board hardware must drive this signal low...
Page 27
Copyright © 2013 congatec ag tu87m10 27/108 the conga-tc87 pwr_ok input circuitry is implemented as shown below: the voltage divider ensures that the input complies with 3.3v cmos characteristic and also allows for carrier board designs that are not driving pwr_ok. Although the pwr_ok input is not m...
Page 28
Copyright © 2013 congatec ag tu87m10 28/108 • connect pwr_ok to the last voltage regulator in the chain on the carrier board. • simply pull pwr_ok with a 1k resistor to the carrier board 3.3v power rail. With this solution, it must be ensured that by the time the 3.3v is up, all carrier board hardwa...
Page 29
Copyright © 2013 congatec ag tu87m10 29/108 5.1.13 power management acpi the conga-tc87 supports advanced configuration and power interface (acpi) specification, revision 4.0a. It also supports suspend to ram (s3). For more information, see section 7.3 “acpi suspend modes and resume events”. Deep sx...
Page 30
Copyright © 2013 congatec ag tu87m10 30/108 5.2 secondary connector rows c and d the following subsystems can be found on the secondary connector rows c and d. 5.2.1 pci express™ the conga-tc87 does not offer pci express lanes on the cd connector. For more information on supported pci express lanes,...
Page 31
Copyright © 2013 congatec ag tu87m10 31/108 5.2.3.1 hdmi the conga-tc87 offers two hdmi ports on the cd connector via the digital display interfaces supported by the processor. The hdmi interfaces are based on hdmi 1.4 specification with support for 3d, 4k, deep color and x.V color. These interfaces...
Page 32
Copyright © 2013 congatec ag tu87m10 32/108 5.2.4 usb 3.0 the conga-tc87 offers two superspeed usb 3.0 ports on the cd connector. These ports are controlled by an xhci host controller provided by the intel ® 8 series pch-lp integrated in the mcp. The host controller allows data transfers of up to 5 ...
Page 33: Additional Features
Copyright © 2013 congatec ag tu87m10 33/108 6 additional features 6.1 congatec board controller (cbc) the conga-tc87 is equipped with texas instruments tiva™ tm4e1231h6zrb microcontroller. This onboard microcontroller plays an important role for most of the congatec embedded/industrial pc features. ...
Page 34
Copyright © 2013 congatec ag tu87m10 34/108 6.6 embedded bios the conga-tc87 is equipped with congatec embedded bios, which is based on american megatrends inc. Aptio uefi firmware. These are the most important embedded pc features: 6.6.1 cmos backup in non volatile memory a copy of the cmos memory ...
Page 35
Copyright © 2013 congatec ag tu87m10 35/108 6.6.4 congatec battery management interface in order to facilitate the development of battery powered mobile systems based on embedded modules, congatec ag defined an interface for the exchange of data between a cpu module (using an acpi operating system) ...
Page 36
Copyright © 2013 congatec ag tu87m10 36/108 6.7 security features the conga-tc87 can be equipped optionally with a “trusted platform module“ (tpm 1.2). This tpm 1.2 includes coprocessors to calculate efficient hash and rsa algorithms with key lengths up to 2,048 bits as well as a real random number ...
Page 37: Conga Tech Notes
Copyright © 2013 congatec ag tu87m10 37/108 7 conga tech notes the conga-tc87 has some technological features that require additional explanation. The following section will give the reader a better understanding of some of these features. This information will also help to gain a better understandi...
Page 38
Copyright © 2013 congatec ag tu87m10 38/108 7.1.2 intel ® rapid start technology intel® rapid start technology enables systems to quickly resume from deep sleep. With this feature enabled, the system resumes smoothly and faster than with fresh start up or resume from hibernate, while maintaining the...
Page 39
Copyright © 2013 congatec ag tu87m10 39/108 7.2.2 thermal monitor and catastrophic thermal protection intel ® core™ i7/i5/i3 and celeron ® processors have a thermal monitor feature that helps to control the processor temperature. The integrated tcc (thermal control circuit) activates if the processo...
Page 40
Copyright © 2013 congatec ag tu87m10 40/108 7.2.4 intel ® 64 architecture the formerly known intel ® extended memory 64 technology is an enhancement to intel ® ’s ia-32 architecture. Intel ® 64 is only available on intel ® core™ i7/i5/i3 and celeron ® processors and is designed to run with newly wri...
Page 41
Copyright © 2013 congatec ag tu87m10 41/108 7.2.5 intel ® virtualization technology virtualization solutions enhanced by intel ® vt will allow a core™ i7/i5/i3 platform to run multiple operating systems and applications in independent partitions. When using virtualization capabilities, one computer ...
Page 42
Copyright © 2013 congatec ag tu87m10 42/108 7.3 acpi suspend modes and resume events conga-tc87 supports s3 (str= suspend to ram). For more information about s3 wake events, see section 10.4.5 “acpi configuration submenu”. S4 (suspend to disk) is not supported by the bios (s4_bios) but it is support...
Page 43: Ehci #1
Copyright © 2013 congatec ag tu87m10 43/108 7.5 usb 2.0 ehci host controller support the 8 available usb ports are provided by a usb 2.0 rate matching hub (rmh) integrated within the intel ® 8 series pch-lp . The ehci controller is connected to the hub as shown below. The hub convert low and full-sp...
Page 44
Copyright © 2013 congatec ag tu87m10 44/108 8 signal descriptions and pinout tables the following section describes the signals found on com express™ type vi connectors used for congatec ag modules. The pinout of the modules complies with com express type 6 rev. 2.1. Table 3 describes the terminolog...
Page 45
Copyright © 2013 congatec ag tu87m10 45/108 8.1 a-b connector signal descriptions table 4 intel ® high definition audio link signals descriptions signal pin # description i/o pu/pd comment ac/hda_rst# a30 intel ® high definition audio reset: this signal is the master hardware reset to external codec...
Page 46
Copyright © 2013 congatec ag tu87m10 46/108 gigabit ethernet pin # description i/o pu/pd comment gbe0_ctref a14 reference voltage for carrier board ethernet channel 0 magnetics center tap. The reference voltage is determined by the requirements of the module phy and may be as low as 0v and as high a...
Page 47
Copyright © 2013 congatec ag tu87m10 47/108 table 7 pci express signal descriptions (general purpose) signal pin # description i/o pu/pd comment pcie_rx0+ pcie_rx0- b68 b69 pci express channel 0, receive input differential pair. I pcie supports pci express base specification, revision 2.0 pcie_tx0+ ...
Page 48
Copyright © 2013 congatec ag tu87m10 48/108 table 9 lpc signal descriptions signal pin # description i/o pu/pd comment lpc_ad[0:3] b4-b7 lpc multiplexed address, command and data bus i/o 3.3v lpc_frame# b3 lpc frame indicates the start of an lpc cycle o 3.3v lpc_drq[0:1]# b8-b9 lpc serial dma reques...
Page 49
Copyright © 2013 congatec ag tu87m10 49/108 table 11 crt signal descriptions signal pin # description i/o pu/pd comment vga_red b89 red for monitor. Analog dac output, designed to drive a 37.5-ohm equivalent load. O analog pd 150r optional on rev. C.X and later vga_grn b91 green for monitor. Analog ...
Page 50
Copyright © 2013 congatec ag tu87m10 50/108 table 13 embedded displayport signal descriptions signal pin # description i/o pu/pd comment edp_tx3+ edp_tx3- edp_tx2+ edp_tx2- edp_tx1+ edp_tx1- edp_tx0+ edp_tx0- a81 a82 a71 a72 a73 a74 a75 a76 edp differential pairs. Ac coupled off module. Edp_tx2 and ...
Page 51
Copyright © 2013 congatec ag tu87m10 51/108 table 15 miscellaneous signal descriptions signal pin # description i/o pu/pd comment i2c_ck b33 general purpose i²c port clock output/input i/o 3.3v pu 2k2 3.3vsb i2c_dat b34 general purpose i²c port data i/o line i/o 3.3v pu 2k2 3.3vsb spkr b32 output fo...
Page 52
Copyright © 2013 congatec ag tu87m10 52/108 table 17 power and system management signal descriptions signal pin # description i/o pu/pd comment pwrbtn# b12 power button to bring system out of s5 (soft off), active on rising edge. I 3.3vsb pu 10k 3.3vsb sys_reset# b49 reset button input. Active low i...
Page 53
Copyright © 2013 congatec ag tu87m10 53/108 table 19 power and gnd signal descriptions signal pin # description i/o pu/pd comment vcc_12v a104-a109 b104-b109 primary power input: +12v nominal. All available vcc_12v pins on the connector(s) shall be used. P vcc_5v_sby b84-b87 standby power input: +5....
Page 54
Copyright © 2013 congatec ag tu87m10 54/108 8.2 a-b connector pinout table 20 connector a-b pinout pin row a pin row b pin row a pin row b a1 gnd (fixed) b1 gnd (fixed) a56 pcie_tx4- (*) b56 pcie_rx4- (*) a2 gbe0_mdi3- b2 gbe0_act# a57 gnd b57 gpo2 a3 gbe0_mdi3+ b3 lpc_frame# a58 pcie_tx3+ b58 pcie_...
Page 55
Copyright © 2013 congatec ag tu87m10 55/108 pin row a pin row b pin row a pin row b a38 usb_6_7_oc# b38 usb_4_5_oc# a93 gpo0 b93 vga_hsync (*) a39 usb4- b39 usb5- a94 spi_clk b94 vga_vsync (*) a40 usb4+ b40 usb5+ a95 spi_mosi b95 vga_i2c_ck (*) a41 gnd (fixed) b41 gnd (fixed) a96 tpm_pp b96 vga_i2c_...
Page 56
Copyright © 2013 congatec ag tu87m10 56/108 8.3 c-d connector signal descriptions table 21 pci express signal descriptions (general purpose) signal pin # description i/o pu/pd comment pcie_rx6+ pcie_rx6- c19 c20 pci express channel 6, receive input differential pair. I pcie not supported pcie_tx6+ p...
Page 57
Copyright © 2013 congatec ag tu87m10 57/108 table 23 pci express signal descriptions (x16 graphics) signal pin # description i/o pu/pd comment peg_rx0+ peg_rx0- peg_rx1+ peg_rx1- peg_rx2+ peg_rx2- peg_rx3+ peg_rx3- peg_rx4+ peg_rx4- peg_rx5+ peg_rx5- peg_rx6+ peg_rx6- peg_rx7+ peg_rx7- peg_rx8+ peg_...
Page 58
Copyright © 2013 congatec ag tu87m10 58/108 signal pin # description i/o pu/pd comment peg_tx0+ peg_tx0- peg_tx1+ peg_tx1- peg_tx2+ peg_tx2- peg_tx3+ peg_tx3- peg_tx4+ peg_tx4- peg_tx5+ peg_tx5- peg_tx6+ peg_tx6- peg_tx7+ peg_tx7- peg_tx8+ peg_tx8- peg_tx9+ peg_tx9- peg_tx10+ peg_tx10- peg_tx11+ peg...
Page 59
Copyright © 2013 congatec ag tu87m10 59/108 table 24 ddi signal description signal pin # description i/o pu/pd comment ddi1_pair0+ ddi1_pair0- d26 d27 multiplexed with dp1_lane0+ and tmds1_data2+. Multiplexed with dp1_lane0- and tmds1_data2-. O pcie ddi1_pair1+ ddi1_pair1- d29 d30 multiplexed with d...
Page 60
Copyright © 2013 congatec ag tu87m10 60/108 signal pin # description i/o pu/pd comment ddi2_ddc_aux_sel c34 selects the function of ddi2_ctrlclk_aux+ and ddi2_ctrldata_aux-. This pin shall have a im pull-down to logic ground on the module. If this input is floating, the aux pair is used for the dp a...
Page 61
Copyright © 2013 congatec ag tu87m10 61/108 table 25 hdmi signal descriptions signal pin # description i/o pu/pd comment tmds1_clk + tmds1_clk - d36 d37 hdmi/dvi tmds clock output differential pair. Multiplexed with ddi1_pair3+ and ddi1_pair3-. O pcie tmds1_data0+ tmds1_data0- d32 d33 hdmi/dvi tmds ...
Page 62
Copyright © 2013 congatec ag tu87m10 62/108 signal pin # description i/o pu/pd comment hdmi3_ctrldata c37 hdmi/dvi i 2 c control data multiplexed with ddi3_ctrldata_aux- i/o od 3.3v not supported note some signals have special functionality during the reset process. They may bootstrap some basic imp...
Page 63
Copyright © 2013 congatec ag tu87m10 63/108 signal pin # description i/o pu/pd comment dp2_hpd d44 detection of hot plug / unplug and notification of the link layer. Multiplexed with ddi2_hpd. I 3.3v pd 1m dp2_aux+ c32 half-duplex bi-directional aux channel for services such as link configuration or...
Page 64
Copyright © 2013 congatec ag tu87m10 64/108 table 27 module type definition signal description signal pin # description i/o comment type0# type1# type2# c54 c57 d57 the type pins indicate to the carrier board the pin-out type that is implemented on the module. The pins are tied on the module to eith...
Page 65
Copyright © 2013 congatec ag tu87m10 65/108 8.4 c-d connector pinout table 29 connector c-d pinout pin row c pin row d pin row c pin row d c1 gnd (fixed) d1 gnd (fixed) c56 peg_rx1- (*) d56 peg_tx1- (*) c2 gnd d2 gnd c57 type1# d57 type2# c3 usb_ssrx0- d3 usb_sstx0- c58 peg_rx2+ (*) d58 peg_tx2+ (*)...
Page 66
Copyright © 2013 congatec ag tu87m10 66/108 pin row c pin row d pin row c pin row d c38 ddi3_ddc_aux_sel (*) d38 rsvd c93 gnd d93 gnd c39 ddi3_pair0+ (*) d39 ddi2_pair0+ c94 peg_rx13+ (*) d94 peg_tx13+ (*) c40 ddi3_pair0- (*) d40 ddi2_pair0- c95 peg_rx13- (*) d95 peg_tx13- (*) c41 gnd (fixed) d41 gn...
Page 67
Copyright © 2013 congatec ag tu87m10 67/108 8.5 boot strap signals table 30 boot strap signal descriptions signal pin # description of boot strap signal i/o pu/pd comment ac/hda_sdout a33 high definition audio serial data out: this signal is the serial tdm data output to the codec(s). This serial ou...
Page 68: System Resources
Copyright © 2013 congatec ag tu87m10 68/108 9 system resources 9.1 i/o address assignment the i/o address assignment of the conga-tc87 module is functionally identical with a standard pc/at. Note the bios assigns pci and pci express i/o resources from fff0h downwards. Non pnp/pci/pci express complia...
Page 69
Copyright © 2013 congatec ag tu87m10 69/108 9.2 pci configuration space map table 31 pci configuration space map bus number (hex) device number (hex) function number (hex) description 00h 00h 00h host bridge 00h 02h 00h graphics 00h 03h 00h intel high definition audio controller 00h 14h 00h xhci hos...
Page 70
Copyright © 2013 congatec ag tu87m10 70/108 9.3 pci interrupt routing map table 32 pci interrupt routing map pirq pci bus int line ¹ apic mode irq graphic hda xhci ehci sm bus + thermal lan sata pci-ex root port 0 pci-ex root port 1 pci-ex root port 2 pci-ex root port 3 pci-ex port 0 pci-ex port 1 p...
Page 71: Bios Setup Description
Copyright © 2013 congatec ag tu87m10 71/108 10 bios setup description the following section describes the bios setup program. The bios setup program can be used to view and change the bios settings for the module. Only experienced users should change the default bios settings. 10.1 entering the bios...
Page 72
Copyright © 2013 congatec ag tu87m10 72/108 the setup program uses a key-based navigation system. Most of the keys can be used at any time while in setup. The table below explains the supported keys: key description ← → left/right select a setup menu (e.G. Main, boot, exit). ↑ ↓ up/down select a set...
Page 73
Copyright © 2013 congatec ag tu87m10 73/108 10.3.1 platform information submenu the platform information submenu offers additional hardware and software information. Feature options description processor information no option subtitle processor type no option displays the processor id string. The “p...
Page 74
Copyright © 2013 congatec ag tu87m10 74/108 main advanced chipset boot security save & exit acoustic management usb smart settings super io serial port console redirection uefi network stack intel(r) ethernet connection i218-lm 10.4.1 graphics submenu feature options description primary graphics dev...
Page 75
Copyright © 2013 congatec ag tu87m10 75/108 feature options description active lfp configuration no local flat panel integrated lvds edp select the active local flat panel configuration. Always try auto panel detect no yes if set to ‘yes’ the bios will first look for an edid data set in an external ...
Page 76
Copyright © 2013 congatec ag tu87m10 76/108 feature options description digital display interface 2 (ddi2) auto selection disabled display port hdmi/dvi select the output type of the digital display interface. ►gop configuration submenu configure graphics output when using the uefi graphics output p...
Page 77
Copyright © 2013 congatec ag tu87m10 77/108 feature options description event 1 acpi event reset power button selects the type of event that will be generated when timeout 1 is reached. For more information about acpi event, see note below. Event 2 disabled acpi event reset power button selects the ...
Page 78
Copyright © 2013 congatec ag tu87m10 78/108 10.4.3 module serial ports submenu feature options description serial port 0 disabled enabled enable or disable module serial port 0. I/o base address 3f8h, 2f8h, 220h, 228h, 238h, 2e8h, 338h, 3e8h set serial port base address. Interrupt none, irq3, irq4, ...
Page 79
Copyright © 2013 congatec ag tu87m10 79/108 feature options description generate excd0/1_perst# disabled 1ms 5ms 10ms 50ms 100ms 150ms 200ms 250ms select whether the com express excd0_perst# and excd1_perst# pins should be driven low during post and how long it will be, if enabled. ►pci express sett...
Page 80
Copyright © 2013 congatec ag tu87m10 80/108 feature options description maximum read request auto 128 bytes 256 bytes 512 bytes 1024 bytes 2048 bytes 4096 bytes set maximum read request size of pci express devices or allow system bios to select the value. Aspm disabled auto force l0s pci express act...
Page 81
Copyright © 2013 congatec ag tu87m10 81/108 10.4.5.3 pci express port submenu feature options description pci express port x disabled enabled enable or disable the respective pci express port x. Note: unless the always enable port (see below) is enabled as well, an unpopulated port will still be dis...
Page 82
Copyright © 2013 congatec ag tu87m10 82/108 feature options description reserved memory 1-20 default : 10 reserved memory range for this root bridge. Prefetchable memory 1-20 default : 10 prefetchable memory range for this root bridge. Reserved i/o 4-20 default : 4 reserved i/o range for this root b...
Page 83
Copyright © 2013 congatec ag tu87m10 83/108 feature options description native pci express support disabled enabled enable or disable native os pci express support. Native aspm disabled enabled enabled = the os will control the aspm support of the pci express device. Disabled = the bios will control...
Page 84
Copyright © 2013 congatec ag tu87m10 84/108 10.4.8 trusted computing submenu feature options description security device support disabled enabled enable or disable tpm support. System reset is required after change. Tpm state disabled enabled enable or disable tpm chip. Note: system might restart se...
Page 85
Copyright © 2013 congatec ag tu87m10 85/108 feature options description active processor cores all 1 2 3 set number of cores to be enabled. Overclocking lock disabled enabled flex_ratio(194) msr limit cpuid maximum disabled enabled when enabled, the processor limits the maximum cpuid input value to ...
Page 86
Copyright © 2013 congatec ag tu87m10 86/108 feature options description cpu power limit3 duty cycle 0-100 default : 0 specify in percentage the duty cycle that the cpu is required to maintain over the configured power limit3 time windows. Ddr power limit1 0-255 default : 0 ddr power limit1 value ddr...
Page 87
Copyright © 2013 congatec ag tu87m10 87/108 feature options description c3 state auto demotion disabled enabled processor will conditionally demote c6/c7 requests to c3 based on uncore auto-demote information. Package c state demotion disabled enabled enable or disable package c state demotion. C1 s...
Page 88
Copyright © 2013 congatec ag tu87m10 88/108 10.4.10 sata submenu feature options description sata controller(s) enabled disabled enable or disable the onboard sata controller(s). Sata mode selection ahci raid select sata controller mode. Raid option is not supported on all chipsets. Sata test mode e...
Page 89
Copyright © 2013 congatec ag tu87m10 89/108 10.4.10.1 software feature mask configuration submenu feature options description raid0 disabled enabled enable or disable raid0 feature. Raid1 disabled enabled enable or disable raid1 feature. Raid10 disabled enabled enable or disable raid10 feature. Raid...
Page 90
Copyright © 2013 congatec ag tu87m10 90/108 feature options description hybrid hard disk support disabled enabled hybrid hard disk support rapid start display save/ restore disabled enabled rapid start display save/restore rapid start display type bios save/restore desktop save/restore rapid start d...
Page 91
Copyright © 2013 congatec ag tu87m10 91/108 10.4.13 usb submenu feature options description usb devices no option displays the detected usb devices. Xhci mode smart auto auto enabled disabled manual smart auto – the bios will store the usb mode set by the os and at next boot the bios will set this p...
Page 92
Copyright © 2013 congatec ag tu87m10 92/108 feature options description usb3.0 port 1 pins disabled enabled enable or disable the xhci superspeed support on respective usb port. Usb ports per-port disable control disabled enabled individual disabling of usb ports usb port 0 disabled enabled enable o...
Page 93
Copyright © 2013 congatec ag tu87m10 93/108 feature options description device power -up delay value 1-40 default : 5 actual power-up delay value in seconds. Usb mass storage device name (auto detected usb mass storage devices are listed here dynamically) auto floppy forced fdd hard disk cd-rom ever...
Page 94
Copyright © 2013 congatec ag tu87m10 94/108 10.4.16 serial port console redirection submenu feature options description com0 console redirection disabled enabled enable or disable serial port 0 console redirection. ►console redirection settings submenu opens console redirection configuration sub men...
Page 95
Copyright © 2013 congatec ag tu87m10 95/108 feature options description legacy os redirection resolution 80x24 80x25 number of rows and columns supported for legacy os redirection. Putty keypad vt100 linux xtermr6 sco escn vt400 select functionkey and keypad on putty. Redirection after bios post ena...
Page 96
Copyright © 2013 congatec ag tu87m10 96/108 10.4.19 nic configuration submenu feature options description link speed auto negotiated 10 mbps half 10 mbps full 100 mbps half 100 mbps full specifies the port speed used for the selected boot protocol. Wake on lan disabled enabled enables the server to ...
Page 97
Copyright © 2013 congatec ag tu87m10 97/108 feature options description hda controller disabled enabled auto control activation of the hda controller device. Disabled = hda controller will be unconditionally disabled. Enabled = hda controller will be unconditionally enabled. Auto = hda controller wi...
Page 98
Copyright © 2013 congatec ag tu87m10 98/108 10.5.2 processor (integrated components) submenu feature options description processor codename no option displays the processor codename. Vt-d capability no option displays whether the vt-d is supported by the processor. Vt-d disabled enabled enable or di...
Page 99
Copyright © 2013 congatec ag tu87m10 99/108 feature options description dmi iot enabled disabled enable or disable dmi iot. 10.5.2.2 memory configuration submenu feature options description memory frequency no option displays the memory frequency. Total memory no option displays the total amount of ...
Page 100
Copyright © 2013 congatec ag tu87m10 100/108 feature options description nmode support auto 1n mode 2n mode nmode support option memory scrambler enabled disabled enable or disable memory scrambler support. Rmt crosser support enabled disabled enable or disable rmt crosser support. Mrc fast boot ena...
Page 101
Copyright © 2013 congatec ag tu87m10 101/108 10.6 boot setup select the boot tab from the setup menu to enter the boot setup screen. 10.6.1 boot settings configuration feature options description quiet boot disabled enabled disabled displays normal post diagnostic messages. Enabled displays oem logo...
Page 102
Copyright © 2013 congatec ag tu87m10 102/108 feature options description 1st, 2nd, 3rd, ... Boot device (up to 12 boot devices can be prioritized if device based priority list control is selected. If “type based” priority list control is enabled only 8 boot devices can be prioritized.) disabled sata...
Page 103
Copyright © 2013 congatec ag tu87m10 103/108 10.6.1.1 csm & option rom control submenu feature options description launch csm enabled disabled controls the execution of the csm module. Only disable for pure uefi operating system support. Boot option filter uefi and legacy legacy only uefi only contr...
Page 104
Copyright © 2013 congatec ag tu87m10 104/108 10.7 security setup select the security tab from the setup menu to enter the security setup screen. 10.7.1 security settings feature options description administrator password enter password specifies the setup administrator password. Hdd security configu...
Page 105
Copyright © 2013 congatec ag tu87m10 105/108 feature description save options save changes save changes made so far to any of the setup options. Stay in setup menu. Discard changes discard changes made so far to any of the setup options. Stay in setup menu. Restore defaults restore default values of...
Page 106: Additional Bios Features
Copyright © 2013 congatec ag tu87m10 106/108 11 additional bios features the conga-tc87 uses a congatec/ami aptioefi that is stored in an onboard flash rom chip and can be updated using the congatec system utility (version 1.5.0 and later), which is available in a dos based command line, win32 comma...
Page 107
Copyright © 2013 congatec ag tu87m10 107/108 11.3 bios security features the bios provides a setup administrator password that limits access to the bios setup menu. 11.4 hard disk security features hard disk security uses the security mode feature commands defined in the ata specification. This func...
Page 108: Industry Specifications
Copyright © 2013 congatec ag tu87m10 108/108 12 industry specifications the list below provides links to industry specifications that apply to congatec ag modules. Specification link low pin count interface specification, revision 1.0 (lpc) http://developer.Intel.Com/design/chipsets/industry/lpc.Htm...