- DL manuals
- Congatec
- Motherboard
- conga-IC175
- User Manual
Congatec conga-IC175 User Manual
Summary of conga-IC175
Page 1
Conga-ic175 thin mini-itx sbc detailed description of the congatec thin mini-itx based on 7th generation intel u-series soc user's guide revision 0.2 ( preliminary ).
Page 2
Copyright © 2017 congatec ag icklm02 2/59 revision history revision date (yyyy.Mm.Dd) author changes 0.1 2017.01.18 aem • preliminary release 0.2 2017.12.05 aem • updated section 5.8.1 “standard sata connectors” • updated table 43 “feature connector x38 pinout description” • added content to section...
Page 3
Copyright © 2017 congatec ag icklm02 3/59 preface this user's guide provides information about the components, features and connectors available on the conga-ic175 thin mini-itx single board. Disclaimer the information contained within this user’s guide, including but not limited to any product spec...
Page 4
Copyright © 2017 congatec ag icklm02 4/59 symbols the following symbols are used in this user's guide: warning warnings indicate conditions that, if not observed, can cause personal injury. Caution cautions warn the user about how to prevent damage to hardware or loss of data. Note notes call attent...
Page 5
Copyright © 2017 congatec ag icklm02 5/59 trademarks product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property of their respective trademark holders. These trademark holders are not affiliated with congatec ag, our ...
Page 6
Copyright © 2017 congatec ag icklm02 6/59 technical support congatec ag technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and implemented. We request that you first visit our website at www.Congatec.Com ...
Page 7
Copyright © 2017 congatec ag icklm02 7/59 contents 1 introduction ............................................................................. 10 1.1 mini-itx concept ..................................................................... 10 1.2 conga-ic175 ..............................................
Page 8
Copyright © 2017 congatec ag icklm02 8/59 6.6 case open intrusion connector .............................................. 52 6.7 trusted platform module – tpm (optional) ............................. 52 6.8 congatec board controller (cbc) ............................................. 52 6.8.1 fan c...
Page 9
Copyright © 2017 congatec ag icklm02 9/59 list of tables table 1 conga-ic175 variants ............................................................... 11 table 2 cooling/io shield .................................................................... 11 table 3 memory modules .............................
Page 10: Introduction
Copyright © 2017 congatec ag icklm02 10/59 1 introduction 1.1 mini-itx concept the mini-itx form factor provides enthusiasts and manufacturers with a standardized ultra compact platform for development. With a footprint of 170 mm x170 mm, this scalable platform promotes the design of highly integrat...
Page 11
Copyright © 2017 congatec ag icklm02 11/59 1.2.1 options information the conga-ic175 is currently available in four variants. This user’s guide describes all of these variants. The table below show the different configurations available. Check for the part number that applies to your product. This w...
Page 12
Copyright © 2017 congatec ag icklm02 12/59 table 4 cables cables part no. Description cab-thinmini-itx-sata-power 14000120 power cable for sata and micro-sata devices. Cab-thinmini-itx-uart 14000121 uart cable with 2 x 5-pin female housing and d-sub male connector. Cab-thinmini-itx-usb2.0-single 140...
Page 13
Copyright © 2017 congatec ag icklm02 13/59 table 7 2.5-inch ssds 2.5-inch ssds part no. Description 2.5" ssd, 120 gb sata iii – intel ® ssd pro 5400s series 10000201 sata iii (6 gbps), 16 nm, tlc, 0°c to 70°c 2.5" ssd, 180 gb sata iii – intel ® ssd pro 5400s series 10000202 sata iii (6 gbps), 16 nm,...
Page 14: Specification
Copyright © 2017 congatec ag icklm02 14/59 2 specification 2.1 feature list table 8 feature summary form factor based on thin mini-itx form factor (170 x 170 mm). Processor 7 th generation intel ® core™ i7,i5, i3 and celeron single chip ultra low tdp processors memory two memory sockets (located on ...
Page 15
Copyright © 2017 congatec ag icklm02 15/59 optional onboard interfaces 1x sbm 3 support header 1x sbm 3 power 1x cec header 1x cctalk other features thermal and voltage monitoring cmos battery beeper congatec standard bios (also possible to boot from an external bios by triggering the bios_disable# ...
Page 16
Copyright © 2017 congatec ag icklm02 16/59 2.4 supply voltage power • 12 – 24v dc ± 5 % 2.5 power consumption the power consumption values were measured using the following test setup: • input voltage +12v • conga-ic175 sbc • conga-ic175 cooling solution • microsoft windows 10 (64 bit) note the cpu ...
Page 17
Copyright © 2017 congatec ag icklm02 17/59 table 10 power consumption values the tables below provide additional information about the power consumption data for each of the conga-ic175 variants offered. The values are recorded at various operating mode. Part no. Memory size h.W rev. Bios rev. Os (6...
Page 18
Copyright © 2017 congatec ag icklm02 18/59 2.7 environmental specifications temperature operation: 0° to 60°c storage: -20° to +70°c humidity operation: 10% to 90% storage: 5% to 95% note the above operating temperatures must be strictly adhered to at all times. Humidity specifications are for non-c...
Page 19: Block Diagram
Copyright © 2017 congatec ag icklm02 19/59 3 block diagram * 1) optional feature (available with a customized variant) * 2) connected either to a standard sata connector or to an m.2 slot. * 3) supports gpios, spi, smbus, lpc, uart, i2c, sleep, lid, watchdog 2x so-dimm ddr4 lpc hda speaker audio alc...
Page 20: Cooling Solution
Copyright © 2017 congatec ag icklm02 20/59 4 cooling solution the conga-ic175 sbc offers ultra low power boards with high computing performance and outstanding graphics. Due to its low power consumption, the sbc generates less heat and therefore requires less active cooling, allowing the use of quie...
Page 21
Copyright © 2017 congatec ag icklm02 21/59 4.1 cooling installation assembly instruction: • flip over the sbc and locate the position of the cpu • place retention frame on the bottom side of the board with insulating foil facing the pcb & standoffs inserted to mounting holes in pcb. • remove the pro...
Page 22
Copyright © 2017 congatec ag icklm02 22/59 4.2 active cooling dimensions note all measurements are in millimeters. Torque specification for cooling solution screws is 0.6 nm. Mechanical system assembly mounting shall follow the valid din/is0 specifications. To replace the fan, use equivalent fan wit...
Page 23: Connector Description
Copyright © 2017 congatec ag icklm02 23/59 5 connector description 5.1 power supply you can power the conga-ic175 sbc with a 12v – 24v laptop type dc power supply (on connector x48) or a 4-pin internal power supply (on connector x49). Additionally, the sbc offers an optional sbm 3 power connector (o...
Page 24
Copyright © 2017 congatec ag icklm02 24/59 5.1.2 power supply (internal connector) the conga-ic175 offers an internal 4-pin power connector. This connector makes it possible to use customized power supply cables or connectors. The power input protects against under voltage or over voltage. Table 13 ...
Page 25
Copyright © 2017 congatec ag icklm02 25/59 table 14 connector x47 pinout description pin function 1 +12 - 24v 2 +12 - 24v 3 gnd 4 gnd 5 n.C connector type x47 : 1x5-pin, 3 mm pitch molex micro-fit connector 5.1.3.1 optional sbm3 signal connector as mentioned in section 5.1.3, you need the optional p...
Page 26
Copyright © 2017 congatec ag icklm02 26/59 5.1.4 power status leds the conga-ic175 provides two led signals (fp_led+ and p_led-) on pins 2 and 4 of the front panel connector x39. The signals indicate the different power states of the conga-ic175. Table 16 led states state fp_led+ fp_led- s0 1 0 s3 0...
Page 27
Copyright © 2017 congatec ag icklm02 27/59 5.3 audio interface the conga-ic175 provides audio connectors internally and on the rear side. The internal audio connectors are stereo speaker, digital microphone/ spdif and front panel hd audio. The rear audio connectors are line-out and mic-in. 5.3.1 rea...
Page 28
Copyright © 2017 congatec ag icklm02 28/59 5.3.2 internal audio connectors the conga-ic175 provides the stereo speaker, digital microphone/spdif, front panel hd and surround audio connectors internally. 5.3.2.1 stereo speaker header the first analog line input channels (left and right) of the realte...
Page 29
Copyright © 2017 congatec ag icklm02 29/59 connector type x28: 2.54 mm, 1x6-pin header 5.3.2.3 front panel (hd audio/ac97) the front panel hd audio signals of the realtek alc888s hda audio codec are routed to connector x27. The pinout description of the connector is shown below: table 20 hda/ac97 fr...
Page 30
Copyright © 2017 congatec ag icklm02 30/59 5.3.2.4 surround header the surround signals of the realtek alc888s hda audio codec are routed to the internal surround connector. Table 21 surround (connector x26) pinout description pin signal description pin signal description 1 line1_l 1st analog line i...
Page 31
Copyright © 2017 congatec ag icklm02 31/59 5.4.3 i²c bus the congatec board controller provides i²c signals. These signals are available in different locations on the conga-ic175, including the feature connector (x38) described in section 6.13 of this document. 5.5 lpc super i/o device the conga-ic1...
Page 32
Copyright © 2017 congatec ag icklm02 32/59 note congatec offers adapter cable for the com ports (see section 1.2.2 “optional accessories/cables). For more information, contact congatec technical solution department. 5.5.3 cpu/system fan connector & power configuration the conga-ic175 supports 5v or ...
Page 33
Copyright © 2017 congatec ag icklm02 33/59 5.6 universal serial bus (usb) the conga-ic175 provides 10 usb ports - four on the rear connectors, four internally and two on the mini-pcie and m.2 connectors. 5.6.1 rear usb connectors the conga-ic175 offers four usb 3.0 ports (port 1-4) on the rear side....
Page 34
Copyright © 2017 congatec ag icklm02 34/59 5.6.2 internal usb connectors the conga-ic175 offers four usb ports (ports 7-10) internally. Ports 7 and 8 are routed to connector x16 while ports 9 and 10 are routed to connector x15. Table 24 connector x16 pinout description usb port 7 usb port 8 pin sign...
Page 35
Copyright © 2017 congatec ag icklm02 35/59 5.7 ethernet 10/100/1000 the conga-ic175 provides two gigabit ethernet ports (connectors x5 and x6) on the rear side. Only the lan interface on connector x5 supports intel amt technology. Table 26 led description connector type x5/x6: 8-pin rj45 connector w...
Page 36
Copyright © 2017 congatec ag icklm02 36/59 note 1. The conga-ic175 offers an additional standard sata connector (x50) via an assembly option (customized variant). 2. Connector x51 supports esata devices. 3. Connector x52 supports satadom devices on hardware revision a.X and later. 5.8.2 sata power t...
Page 37
Copyright © 2017 congatec ag icklm02 37/59 5.8.3 m.2 slot the conga-ic175 offers an m.2, type 3042/2242 slot (x10) for connecting sata or pcie x2 ssds and wwan devices. Table 28 connector x10 pinout description (revision b.X and later) pin signal pin signal 1 config_3 2 +3.3v 3 gnd 4 +3.3v 5 gnd 6 f...
Page 38
Copyright © 2017 congatec ag icklm02 38/59 pin signal pin signal 57 gnd 58 n.C 59 n.C 60 n.C 61 n.C 62 n.C 63 n.C 64 n.C 65 n.C 66 n.C 67 reset# 68 susclk 69 config_1 70 +3.3v 71 gnd 72 +3.3v 73 gnd 74 +3.3v 75 config_2 connector type x10: m.2 type b slot (compatible with card size 3042 or 2242) not...
Page 39
Copyright © 2017 congatec ag icklm02 39/59 5.9 display interfaces the conga-ic175 supports up to three independent displays. The interfaces supported are two digital display interfaces and one lvds or edp interface. 5.9.1 display port interface dp++ the conga-ic175 sbc has two dp++ connectors (x18 a...
Page 40
Copyright © 2017 congatec ag icklm02 40/59 table 29 connector x25 pinout description pin signal pin signal 1 lvds_a3+ 21 n.C 2 lvds_a3- 22 edid_3.3v 3 lvds_a2+ 23 lcd_gnd 4 lvds_a2- 24 lcd_gnd 5 lvds_a1+ 25 lcd_gnd 6 lvds_a1- 26 lvds_a_clk+ 7 lvds_a0+ 27 lvds_a_clk- 8 lvds_a0- 28 bklt_gnd 9 lvds_b3+...
Page 41
Copyright © 2017 congatec ag icklm02 41/59 5.9.3 embedded display port (edp) the conga-ic175 provides edp interface on connector x20 - a standard 40-pin displayport connector. The edp signals are sourced from incoming edp stream via a multiplexer. The multiplexer routes the edp signals to lvds conne...
Page 42
Copyright © 2017 congatec ag icklm02 42/59 mating connector: aces 88441-40 or aces 50204-40 note congatec offers cables and adapter for the edp interface (see section 1.2.2 “optional accessories/cables”). For more information, contact the congatec technical solution department. 5.9.3.1 backlight pow...
Page 43
Copyright © 2017 congatec ag icklm02 43/59 5.9.3.2 backlight/panel power selection the conga-ic175 supports different voltages for the panel and backlight. With jumper x23, you can set the panel voltage to 3,3v, 5v or 12v. With jumper x24, you can set the backlight voltage to 5v or 12v. Table 32 con...
Page 44
Copyright © 2017 congatec ag icklm02 44/59 5.9.4 pci express the conga-ic175 provides 3 pcie interfaces - a pcie m.2 slot on connector x10 (see section 5.8.3), a pcie x4 slot on connector x7 and a full/ half size mini pcie slot on connector x8 5.9.4.1 pcie x4 slot the conga-ic175 offers a pcie x4 sl...
Page 45
Copyright © 2017 congatec ag icklm02 45/59 b22 gnd a22 pcie_rx1- b23 pcie_tx2+ a23 gnd b24 pcie_tx2- a24 gnd b25 gnd a25 pcie_rx2+ b26 gnd a26 pcie_rx2- b27 pcie_tx3+ a27 gnd b28 pcie_tx3- a28 gnd b29 gnd a29 pcie_rx3+ b30 n.C a30 pcie_rx3- b31 prsnt#2 a31 gnd b32 gnd a32 rsvd connector type x7: pci...
Page 46
Copyright © 2017 congatec ag icklm02 46/59 pin signal pin signal 21 gnd 22 perst# 23 pern0 24 +3.3v 25 perp0 26 gnd 27 gnd 28 +1.5v 29 gnd 30 smb_clk 31 petn0 32 smb_data 33 petp0 34 gnd 35 gnd 36 usb_d- 37 gnd 38 usb_d+ 39 +3.3v 40 gnd 41 +3.3v 42 n.C 43 gnd 44 led_wlan# (optional) 45 cl_clk 46 n.C...
Page 47
Copyright © 2017 congatec ag icklm02 47/59 5.9.4.3 pci express routing the diagram below shows how the pcie lanes are routed to the pcie connectors. Pcie x4 slot 0 mini pcie slot 1 pcie lane2 pcie lane1 pcie lane12 or sata port 2 pcie lane11 pcie lane3 pcie lane4 usb 2.0 signals pcie lane9 usb 2.0 s...
Page 48: Additional Features
Copyright © 2017 congatec ag icklm02 48/59 6 additional features 6.1 front panel connector the conga-ic175 sbc supports front panel features such as power button, status leds and reset button via connector x39 - a 10-pin internal header. The fp_led+ and fp_led- signals communicate the system states ...
Page 49
Copyright © 2017 congatec ag icklm02 49/59 pin signal description c3 clk clock c4 n.A not available c5 gnd ground c6 vpp programming voltage input c7 i/o data c8 n.A not available connector type x11: micro-sim card socket (molex 78800 series) note 1. The micro-sim card slot is connected to the uim i...
Page 50
Copyright © 2017 congatec ag icklm02 50/59 6.4 mipi csi-2 the conga-ic175 offers an onboard camera interface on connector x9. The interface supports up to two independent cameras - four data lanes for the first camera and two data lanes for the second camera. Each lane operates at up to 1.5 gbps dep...
Page 51
Copyright © 2017 congatec ag icklm02 51/59 31 cam1_rst# camera 1 reset (low active, 1.8v) 32 cam1_csi_d1+ csi2 camera 1 data lane 1+ 33 cam1_csi_d1- csi2 camera 1 data lane 1- 34 gnd ground 35 cam0_gpio gpio for camera 0 (1.8v) 36 cam1_gpio gpio for camera 1 (1.8v) connector type x9: 36-pin, 0.5 mm ...
Page 52
Copyright © 2017 congatec ag icklm02 52/59 6.6 case open intrusion connector the conga-ic175 provides connector x2 for case-open intrusion detection. Table 42 case open intrusion (connector x2) pinout description pin function 1 gnd 2 intruder# connector type x2: 2.54 mm, 2-pin molex kk series connec...
Page 53
Copyright © 2017 congatec ag icklm02 53/59 6.8.2 power loss control the cbc has full control of the power-up of the sbc and therefore can be used to specify the behavior of the system after an ac power loss condition. Supported modes are “always on”, “remain off” and “last state”. 6.8.3 board inform...
Page 54
Copyright © 2017 congatec ag icklm02 54/59 6.9.3 congatec battery management interface in order to facilitate the development of battery powered mobile systems based on embedded modules, congatec ag defined an interface for the exchange of data between a cpu module (using an acpi operating system) a...
Page 55
Copyright © 2017 congatec ag icklm02 55/59 6.12 external system wake event the conga-ic175 supports lan, usb, pcie and pwrbtn driven wake up events. 6.13 feature connector the conga-ic175 provides an internal 50-pin, 2mm pin header as feature connector. The pinout is described below: table 43 featur...
Page 56
Copyright © 2017 congatec ag icklm02 56/59 24 gpo7 output 3.3v pu 4k7 general purpose output from super io (lpc) 25 gpi0 input 3.3v pu 10k general purpose input to board controller 26 gpi1 input 3.3v pu 10k general purpose input to congatec board controller 27 gpi2 input 3.3v pu 10k general purpose ...
Page 57
Copyright © 2017 congatec ag icklm02 57/59 7 conga-ic175 mechanical drawing 2-3 -> +5v 1-2 -> +1 2v x35: sy s f an 2-3 - > + 5v 1-2 - > +1 2v x32: c pu f an sata2 sata1 sbm3 pwr connector pnl power bklt power monitor off front_panel sys fan cpu fan sata0 spdif/dmic pwr dp++ dp++ eth1 eth2 usb3.0 usb...
Page 58: Bios Setup Description
Copyright © 2017 congatec ag icklm02 58/59 8 bios setup description 8.1 navigating the bios setup menu the bios setup menu shows the features and options supported in the congatec bios. To access and navigate the bios setup menu, press the or key during post. The right frame displays the key legend....
Page 59: Industry Specifications
Copyright © 2017 congatec ag icklm02 59/59 9 industry specifications the list below provides links to industry specifications that apply to congatec ag modules. Specification link low pin count interface specification, revision 1.0 (lpc) http://developer.Intel.Com/design/chipsets/industry/lpc.Htm un...