- DL manuals
- Congatec
- Computer Hardware
- conga-QA3
- User manual
Congatec conga-QA3 User manual
Summary of conga-QA3
Page 1
Qseven ® conga-qa3/qa3e third generation intel ® atom™ and intel ® celeron ® soc user’s guide revision 1.1.
Page 2
Copyright © 2013 congatec ag qa30_qa3em11 2/91 revision history revision date (yyyy.Mm.Dd) author changes 1.0 2015.10.16 aem • merged the conga-qa30 with the conga-qa3e user’s guide, to create a single user’s guide. Revision 1.0 is the first revision for the combined user’s guide • added note about ...
Page 3
Copyright © 2013 congatec ag qa30_qa3em11 3/91 preface this user’s guide provides information about the components, features, connector and bios setup menus available on the conga-qa3/qa3e. It is one of three documents that should be referred to when designing a qseven ® application. The other refer...
Page 4
Copyright © 2013 congatec ag qa30_qa3em11 4/91 symbols the following symbols are used in this user’s guide: warning warnings indicate conditions that, if not observed, can cause personal injury. Caution cautions warn the user about how to prevent damage to hardware or loss of data. Note notes call a...
Page 5
Copyright © 2013 congatec ag qa30_qa3em11 5/91 warranty congatec ag makes no representation, warranty or guaranty, express or implied regarding the products except its standard form of limited warranty (“limited warranty”) per the terms and conditions of the congatec entity, which the product is del...
Page 6
Copyright © 2013 congatec ag qa30_qa3em11 6/91 terminology term description pcie peripheral component interface express – next-generation high speed serialized i/o bus pci express lane one pci express lane is a set of 4 signals that contains two differential lines for transmitter and two differentia...
Page 7
Copyright © 2013 congatec ag qa30_qa3em11 7/91 contents 1 introduction ............................................................................. 10 1.1 qseven ® concept .................................................................... 10 1.2 conga-qa3 options information ........................
Page 8
Copyright © 2013 congatec ag qa30_qa3em11 8/91 9 system resources .................................................................... 57 9.1 i/o address assignment .......................................................... 57 9.1.1 lpc bus ..............................................................
Page 9
Copyright © 2013 congatec ag qa30_qa3em11 9/91 list of tables table 1 feature summary ..................................................................... 14 table 2 display combination ............................................................... 26 table 3 signal tables terminology descriptions...
Page 10: Introduction
Copyright © 2013 congatec ag qa30_qa3em11 10/91 1 introduction 1.1 qseven ® concept the qseven ® concept is an off-the-shelf, multi vendor, single-board-computer that integrates all the core components of a common pc and is mounted onto an application specific carrier board. Qseven ® modules have a ...
Page 11
Copyright © 2013 congatec ag qa30_qa3em11 11/91 1.2 conga-qa3 options information the conga-qa3 is available in various variants (commercial and industrial).This user’s guide describes all of these variants and the table below shows the different configurations available. Check for the part no. That...
Page 12
Copyright © 2013 congatec ag qa30_qa3em11 12/91 part-no. 015112 015113 015130 015131 processor intel ® celeron ® n2930 (quad core, 1.83/2.16 ghz) intel ® celeron ® n2807 (dual core, 1.58/2.16 ghz) intel ® atom™ e3805 (dual core, 1.33 ghz) intel ® atom™ e3845 (quad core, 1.91 ghz) l2 cache 2 mb 1 mb ...
Page 13
Copyright © 2013 congatec ag qa30_qa3em11 13/91 1.3 conga-qa3e options information the conga-qa3e is available in two variants. The table below shows the different configurations available. Check for the part no. That applies to your product. This will tell you what options described in this user’s ...
Page 14: Specifications
Copyright © 2013 congatec ag qa30_qa3em11 14/91 2 specifications 2.1 feature list table 1 feature summary form factor based on qseven ® form factor specification revision 2.0 processor intel ® atom™ e3845 /e3827 /e3826 /e3825 /e3815 intel ® celeron j1900 /n2930 /n2807 memory conga:qa3: single or dua...
Page 15
Copyright © 2013 congatec ag qa30_qa3em11 15/91 note some of the features mentioned in the above feature summary are optional. Check the article number of your module and compare it to the option information list on page 11 of this user’s guide to determine what options are available on your particu...
Page 16
Copyright © 2013 congatec ag qa30_qa3em11 16/91 2.4 supply voltage standard power • 5v dc ± 5% the dynamic range shall not exceed the static range. 2.4.1 electrical characteristics characteristics min. Typ. Max. Units comment 5v voltage ± 5% 4.75 5.00 5.25 vdc ripple - - ± 50 mv pp 0-20mhz current 5...
Page 17
Copyright © 2013 congatec ag qa30_qa3em11 17/91 2.5 power consumption the power consumption values were measured with the following setup: • conga-qa3/qa3e com • modified congatec carrier board • conga-qa3/qa3e cooling solution • microsoft windows 7 (64 bit) note the cpu was stressed to its maximum ...
Page 18
Copyright © 2013 congatec ag qa30_qa3em11 18/91 processor information table 2 power consumption values the tables below provide additional information about the power consumption data for each of the conga-qa3/qa3e variants offered. The values are recorded at various operating mode. Part no. Memory ...
Page 19
Copyright © 2013 congatec ag qa30_qa3em11 19/91 note 1. Do not use the cmos battery power consumption values listed above to calculate cmos battery lifetime. 2. Measure the cmos battery power consumption in your customer specific application in worst case conditions (for example, during high tempera...
Page 20: Block Diagram
Copyright © 2013 congatec ag qa30_qa3em11 20/91 3 block diagram intel bay trail soc compute unit core #1 core #2 core #3 core #4 tri-gate 3-d 22nm quad core soc 1mb l2 cache shared by 2 cores processor core sse4.2 aes avx soc transaction router interfaces multimedia features displayport hdmi/dvi vga...
Page 21: Heatspreader
Copyright © 2013 congatec ag qa30_qa3em11 21/91 4 heatspreader an important factor for each system integration is the thermal design. The heatspreader acts as a thermal coupling device to the module and is thermally coupled to the cpu via a thermal gap filler. On some modules, it may also be thermal...
Page 22
Copyright © 2013 congatec ag qa30_qa3em11 22/91 4.1 heatspreader dimensions note all measurements are in millimeters. Torque specification for heatspreader screws is 0.3 nm. Mechanical system assembly mounting shall follow the valid din/is0 specifications. The cooling strip found on the conga-qa3/qa...
Page 23: Connector Subsystems
Copyright © 2013 congatec ag qa30_qa3em11 23/91 5 connector subsystems the conga-qa3/qa3e is based on the qseven ® standard. It therefore has 115 edge fingers on the top and bottom side of the module that mate with the 230-pin card-edge mxm connector located on the carrier board. This connector is a...
Page 24
Copyright © 2013 congatec ag qa30_qa3em11 24/91 5.1 pci express™ the conga-qa3/qa3e offers 3 pci express externally on the edge finger. The lanes are gen 2 compliant and offer support for full 5 gb/s bandwidth in each direction per x1 link. Default configuration for the lanes is 3 x1 link. A 1 x2 + ...
Page 25
Copyright © 2013 congatec ag qa30_qa3em11 25/91 note the usb overcurrent protection is disabled by default on usb ports 0 and 1 (native ports). To enable this function, you require a customized bios. Contact congatec technical support department for more information. 5.6 usb 3.0 the conga-qa3/qa3e o...
Page 26
Copyright © 2013 congatec ag qa30_qa3em11 26/91 5.10 digital display interface the bay trail soc provides two ddi ports to enable edp 1.3, dp 1.1a, dvi or hdmi 1.4a. One of the ports (ddi0) is routed directly to the edge finger for the support of edp/dp/hdmi/dvi. The other port (ddi1) is routed to t...
Page 27
Copyright © 2013 congatec ag qa30_qa3em11 27/91 the displayport interface is provided by ddi0 of the bay trail soc and is shared with hdmi/dvi. The supported resolution is up to 2560x1600@60hz. Note the conga-qa3/qa3e supports one displayport display. See table 2 above for possible display combinati...
Page 28
Copyright © 2013 congatec ag qa30_qa3em11 28/91 5.12 spi the conga-qa3/qa3e offers the spi interface only for booting a bios from an spi flash device placed on the carrier board. 5.13 i²c bus the conga-qa3/qa3e supports i2c bus. Thanks to the i2c host controller in the cbc, the i²c bus is multi-mast...
Page 29
Copyright © 2013 congatec ag qa30_qa3em11 29/91 when pwrbtn# is asserted, it indicates that an operator wants to turn the power on or off. The response to this signal from the system may vary as a result of modifications made in bios settings or by system software. Note to initiate an acpi event, th...
Page 30: Additional Features
Copyright © 2013 congatec ag qa30_qa3em11 30/91 6 additional features 6.1 onboard interfaces 6.1.1 mipi-csi 2.0 the conga-qa3/qa3e revision b.X and later offer an onboard camera interface via the feature connector. The interface supports up to two independent cameras - four data lanes for the first ...
Page 31
Copyright © 2013 congatec ag qa30_qa3em11 31/91 6.2.1 board information the cbc provides a rich data-set of manufacturing and board information such as serial number, ean number, hardware and firmware revisions, and so on. It also keeps track of dynamically changing data like runtime meter and boot ...
Page 32
Copyright © 2013 congatec ag qa30_qa3em11 32/91 6.3.2 oem cmos default settings and oem bios logo this feature allows system designers to create and store their own cmos default configuration and bios logo (splash screen) within the bios flash device. Customized bios development by congatec for thes...
Page 33
Copyright © 2013 congatec ag qa30_qa3em11 33/91 6.3.5 api support (cgos/eapi) in order to benefit from the above mentioned non-industry standard feature set, congatec provides an api that allows application software developers to easily integrate all these features into their code. The cgos api (con...
Page 34: Conga Tech Notes
Copyright © 2013 congatec ag qa30_qa3em11 34/91 7 conga tech notes the conga-qa3/qa3e has some technological features that require additional explanation. The following section will give the reader a better understanding of some of these features. This information will also help to gain a better und...
Page 35
Copyright © 2013 congatec ag qa30_qa3em11 35/91 7.1.1.2 ahci the intel bay trail soc provides hardware support for advanced host controller interface (ahci), a programming interface for sata host controllers. Platforms supporting ahci may take advantage of performance features such as no master/slav...
Page 36
Copyright © 2013 congatec ag qa30_qa3em11 36/91 the operating system will use to start or stop the passive cooling procedure. • critical trip point if the temperature in the thermal zone reaches a critical point then the operating system will perform a system shut down in an orderly fashion in order...
Page 37
Copyright © 2013 congatec ag qa30_qa3em11 37/91 7.3 xhci and ehci port mapping note the usb overcurrent protection is disabled by default on usb ports 0 and 1 (native ports). To enable this function, you require a customized bios. Contact congatec technical support department for more information. B...
Page 38
Copyright © 2013 congatec ag qa30_qa3em11 38/91 8 signal descriptions and pinout tables the following section describes the signals found on qseven ® module’s edge fingers. Table 2 describes the terminology used in this section for the signal description tables. The pu/pd column indicates if a pull-...
Page 39
Copyright © 2013 congatec ag qa30_qa3em11 39/91 table 4 edge finger pinout pin signal description pin signal description 1 gnd power ground 2 gnd power ground 3 gbe_mdi3- gigabit ethernet mdi3- 4 gbe_mdi2- gigabit ethernet mdi2- 5 gbe_mdi3+ gigabit ethernet mdi3+ 6 gbe_mdi2+ gigabit ethernet mdi2+ 7...
Page 40
Copyright © 2013 congatec ag qa30_qa3em11 40/91 pin signal description pin signal description 69 thrm# thermal alarm active low 70 wdtrig# watchdog trigger signal 71 thrmtrip# thermal trip indicates an overheating condition 72 wdout watchdog event indicator 73 gnd power ground 74 gnd power ground 75...
Page 41
Copyright © 2013 congatec ag qa30_qa3em11 41/91 pin signal description pin signal description 123 lvds_blt_ctrl / gp_pwm_out0 pwm backlight brightness general purpose pwm output 124 gp_1-wire_bus (*) general purpose 1-wire bus interface 125 lvds_did_dat / gp_i2c_dat ddc display id data line general ...
Page 42
Copyright © 2013 congatec ag qa30_qa3em11 42/91 pin signal description pin signal description 185 lpc_ad0 lpc interface address data 0 186 lpc_ad1 lpc interface address data 1 187 lpc_ad2 lpc interface address data 2 188 lpc_ad3 lpc interface address data 3 189 lpc_clk lpc interface clock 190 lpc_fr...
Page 43
Copyright © 2013 congatec ag qa30_qa3em11 43/91 table 5 pci express signal descriptions signal pin # description i/o pu/pd comment pcie0_rx+ pcie0_rx- 180 182 pci express channel 0, receive input differential pair. I pcie supports pci express base specification, revision 2.0 pcie0_tx+ pcie0_tx- 179 ...
Page 44
Copyright © 2013 congatec ag qa30_qa3em11 44/91 table 6 uart signal descriptions signal pin # description i/o pu/pd comment uart0_tx (**) 171 serial data transmitter o 3.3v uart0_rx (**) 177 serial data reciever i 3.3vsb pu 20k 3.3vsb uart0_cts# (**) 178 handshake signal, ready to send data i 3.3vsb...
Page 45
Copyright © 2013 congatec ag qa30_qa3em11 45/91 the conga-qa3/qa3e can drive gbe leds directly with up to 10ma. Table 8 sata signal descriptions signal pin # description i/o pu/pd comment sata0_rx+ sata0_rx- 35 37 serial ata channel 0, receive input differential pair. I sata supports serial ata spec...
Page 46
Copyright © 2013 congatec ag qa30_qa3em11 46/91 usb_p7+ usb_p7- usb_sstx0+ usb_sstx0- 77 75 universal serial bus port 7 differential pair. Multiplexed with transmit signal differential pairs for the superspeed usb data path o pcie usb 2.0 compliant. Backwards compatible to usb 1.1 ac coupled on modu...
Page 47
Copyright © 2013 congatec ag qa30_qa3em11 47/91 sdio_led 44 sdio led. Used to drive an external led to indicate when transfers occur on the bus. O 3.3v bay trail sd card controller does not provide any sdio_led signal. Sdio_ led signal is therefore generated by a logic gate. Led blinking might diffe...
Page 48
Copyright © 2013 congatec ag qa30_qa3em11 48/91 table 12 lvds signal descriptions signal pin # description i/o pu/pd comment lvds_ppen 111 controls panel power enable. O 3.3v pd 10k lvds_blen 112 controls panel backlight enable. O 3.3v pd 10k lvds_blt_ctrl /gp_pwm_out0 123 primary functionality is t...
Page 49
Copyright © 2013 congatec ag qa30_qa3em11 49/91 lvds_b_clk+ lvds_b_clk- edp1_aux+ edp1_aux- 120 122 lvds secondary channel differential pair clock lines. Display port secondary auxiliary channel. O lvds lvds_did_clk /gp2_i2c_clk 127 primary functionality is displayid ddc clock line used for lvds fla...
Page 50
Copyright © 2013 congatec ag qa30_qa3em11 50/91 table 14 hdmi/dvi signal descriptions signal pin # description i/o pu/pd comment tmds_clk+ tmds_clk- 131 133 tmds differential pair clock lines. (shared with dp_lane3- and dp_lane3+) o tmds passive level shifter shall use pd 620r. Tmds_lane0+ tmds_lane...
Page 51
Copyright © 2013 congatec ag qa30_qa3em11 51/91 the bidirectional level shifters by nature have limited driving strenght. Congatec therefore recommends that you route these signals as short as possible. The conga-qa3/qa3e does not support gpios on the lpc interface. Table 16 spi interface signal des...
Page 52
Copyright © 2013 congatec ag qa30_qa3em11 52/91 table 18 power and gnd signal descriptions signal pin # description i/o pu/pd comment vcc 211-230 power supply +5vdc ±5%. P vcc_5v_sb 205-206 standby power supply +5vdc ±5%. P vcc_rtc 193 3 v backup cell input. Vcc_rtc should be connected to a 3v backu...
Page 53
Copyright © 2013 congatec ag qa30_qa3em11 53/91 lid_btn# 22 lid button. Low active signal used by the acpi operating system to detect a lid switch and to bring system into sleep state or to wake it up again. I 3.3vsb pu 10k 3.3vsb table 21 miscellaneous signal descriptions signal pin # description i...
Page 54
Copyright © 2013 congatec ag qa30_qa3em11 54/91 table 22 manufacturing signal descriptions signal pin # description i/o pu/pd comment mfg_nc0 207 this pin is reserved for manufacturing and debugging purposes. May be used as jtag_tck signal for boundary scan purposes during production or as a vendor ...
Page 55
Copyright © 2013 congatec ag qa30_qa3em11 55/91 fan_tachoin 195 primary functionality is fan tachometer input. I 3.3v pu 10k 3.3v table 25 onboard camera interface signal descriptions signal pin # description i/o type comment cam_pwr 1 3.3v +/- 5% supply voltage to power the camera device 3.3v o cam...
Page 56
Copyright © 2013 congatec ag qa30_qa3em11 56/91 cam1_gpio 36 gpio for camera 1 cmos 1.8v.
Page 57: System Resources
Copyright © 2013 congatec ag qa30_qa3em11 57/91 9 system resources 9.1 i/o address assignment the i/o address assignment of the conga-qa3/qa3e module is functionally identical with a standard pc/at. The bios assigns pci and pci express i/o resources from fff0h downwards. Non pnp/pci/pci express comp...
Page 58
Copyright © 2013 congatec ag qa30_qa3em11 58/91 9.2 pci configuration space map table 26 pci configuration space map bus number (hex) device number (hex) function number (hex) description 00h 00h 00h soc transaction router 00h 02h 00h graphics and display 00h 12h 00h sd port 00h 13h 00h sata ahci/id...
Page 59
Copyright © 2013 congatec ag qa30_qa3em11 59/91 9.3 pci interrupt routing map table 27 pci interrupt routing map pirq pci bus int line ¹ apic mode irq graphic sd card sata xhci emmc 4.5 port txe hd audio pci-ex root port 0 pci-ex root port 1 pci-ex root port 2 pci-ex root port 3 ehci usb smbus port ...
Page 60: Bios Setup Description
Copyright © 2013 congatec ag qa30_qa3em11 60/91 10 bios setup description the following section describes the bios setup program. The bios setup program can be used to view and change the bios settings for the module. Only experienced users should change the default bios settings. 10.1 entering the ...
Page 61
Copyright © 2013 congatec ag qa30_qa3em11 61/91 the setup program uses a key-based navigation system. Most of the keys can be used at any time while in setup. The table below explains the supported keys: key description ← → left/right select a setup menu (e.G. Main, boot, exit). ↑ ↓ up/down select a...
Page 62
Copyright © 2013 congatec ag qa30_qa3em11 62/91 10.4 advanced setup select the advanced tab from the setup menu to enter the advanced bios setup screen. The menu is used for setting advanced features and only features described within this user’s guide are listed. Main advanced chipset boot security...
Page 63
Copyright © 2013 congatec ag qa30_qa3em11 63/91 10.4.1 watchdog submenu feature options description post watchdog disabled 30sec 1min 2min 5min 10min 30min select the timeout value for the post watchdog. The watchdog is only active during the power-on-self-test of the system and provides a facility ...
Page 64
Copyright © 2013 congatec ag qa30_qa3em11 64/91 feature options description timeout 1 1sec 2sec 5sec 10sec 30sec 1min 2min 5min 10min 30min select the timeout value for the first stage watchdog event. Timeout 2 see above select the timeout value for the second stage watchdog event. Timeout 3 see abo...
Page 65
Copyright © 2013 congatec ag qa30_qa3em11 65/91 10.4.2 graphics submenu feature options description boot display device vbios default crt enable disable enable or disable crt video interface. Active lfp no lvds lvds select the active local flat panel configuration. Always try auto panel detect no ye...
Page 66
Copyright © 2013 congatec ag qa30_qa3em11 66/91 feature options description backlight setting 0% 10% 25% 40% 50% 60% 75% 90% 100% actual backlight value in percent of the maximum setting. Force lvds backlight no yes if set to ‘yes’, the board controller forces backlight enable signal unconditionally...
Page 67
Copyright © 2013 congatec ag qa30_qa3em11 67/91 10.4.4 trusted computing submenu feature options description security device support disabled enabled enable or disable tpm support. System reset is required after change. User confirmation disabled enabled enable or disable user confirmation requests ...
Page 68
Copyright © 2013 congatec ag qa30_qa3em11 68/91 10.4.7 reserve legacy interrupt submenu feature options description reserve legacy interrupt 1/2/3 none irq3 irq4 irq5 irq6 irq10 irq11 irq14 irq15 the interrupt reserved here will not be assigned to any pci or pci express device and thus maybe availab...
Page 69
Copyright © 2013 congatec ag qa30_qa3em11 69/91 10.4.10 serial port 1 submenu feature options description serial port enable disable enable or disable serial port (com). Change settings auto io=3f8; irq=3,4,5,7,9,10,11, 12; dma; io=2f8; irq=3,4,5,7,9,10,11, 12; dma; io=3f8; irq=3,4,5,7,9,10,11, 12; ...
Page 70
Copyright © 2013 congatec ag qa30_qa3em11 70/91 10.4.13 intel(r) smart connect technology submenu feature options description isct support disabled enabled enable or disable intel(r) smart connection support. When this setup node is set to disabled, all the other nodes will not be visible. Isct noti...
Page 71
Copyright © 2013 congatec ag qa30_qa3em11 71/91 10.4.14.1 console redirection settings com0 submenu feature options description terminal type vt100 vt100+ vt-utf8 ansi select terminal type. Baudrate 9600 19200 38400 57600 115200 select baud rate. Data bits 7 8 set number of data bits. Parity none ev...
Page 72
Copyright © 2013 congatec ag qa30_qa3em11 72/91 10.4.14.2 console redirection settings com1 submenu feature options description terminal type vt100 vt100+ vt-utf8 ansi select terminal type. Baudrate 9600 19200 38400 57600 115200 select baud rate. Data bits 7 8 set number of data bits. Parity none ev...
Page 73
Copyright © 2013 congatec ag qa30_qa3em11 73/91 10.4.14.3 console redirection settings out-of-band management submenu feature options description terminal type vt100 vt100+ vt-utf8 ansi select terminal type. Bits per second 9600, 19200, 38400, 57600, 115200 select baud rate. Data bits 8 set number o...
Page 74
Copyright © 2013 congatec ag qa30_qa3em11 74/91 10.4.15.1 socket 0 cpu information submenu feature options description cpu name no option displays socket specific cpu name. Cpu signature no option displays cpu signature number. Microcode patch no option displays the cpu microcode patch number. Max. ...
Page 75
Copyright © 2013 congatec ag qa30_qa3em11 75/91 10.4.17 thermal configuration feature options description critical trip point 110 c 105 c 100 c 95 c 90 c 87 c 85 c 79 c 71 c 63 c 55 c 47 c 39 c 31 c 23 c 15 c temperature of the acpi critical trip point in which the os will shut the system off. Passi...
Page 76
Copyright © 2013 congatec ag qa30_qa3em11 76/91 feature options description active trip point high 110 c 105 c 100 c 95 c 90 c 87 c 85 c 79 c 71 c 63 c 55 c 47 c 39 c 31 c 23 c 15 c this value controls the temperature of the acpi active trip point – the point at which the operating system will enabl...
Page 77
Copyright © 2013 congatec ag qa30_qa3em11 77/91 feature options description sata odd port port 0 odd port 1 odd no odd configure which sata port is odd. Sata mode ide mode ahci mode configure sata port mode. Serial-ata port 0 enabled disabled enable or disable the sata port 0. Msata interface msata ...
Page 78
Copyright © 2013 congatec ag qa30_qa3em11 78/91 feature options description scc 4.5 hs200 emmc support enabled disabled enable ddr50 emmc support. Emmc secure erase enabled disabled enable emmc secure erase support. Scc sd card support enabled disabled enable storage control cluster sd card support ...
Page 79
Copyright © 2013 congatec ag qa30_qa3em11 79/91 feature options description above 4g decoding disabled enabled enable or disable 64bit capable devices to be decoded in above 4g address space (only if system supports 64 bit pci decoding). Sr-iov support disabled enabled if the system has a sr-iov cap...
Page 80
Copyright © 2013 congatec ag qa30_qa3em11 80/91 feature options description link training timeout (us) 10 - 10000 defines number of microseconds software will wait before polling ‘link training’ bit in link status register. Value range from 10 to 10000 us. Default: 1000 unpopulated links keep link o...
Page 81
Copyright © 2013 congatec ag qa30_qa3em11 81/91 10.4.24 network stack feature options description network stack enabled disabled enable or disable the uefi network stack. Ipv4 pxe support enabled disabled enable ipv4 pxe boot support. If disabled ipv4 pxe boot option will not be created. Ipv6 pxe su...
Page 82
Copyright © 2013 congatec ag qa30_qa3em11 82/91 10.4.26 sdio submenu feature options description sdio access mode auto dma pio controls the sdio access mode to the device. 10.4.27 usb submenu feature options description usb module version no option displays the version of the usb module. Usb devices...
Page 83
Copyright © 2013 congatec ag qa30_qa3em11 83/91 10.4.29 security configuration feature options description txe enabled disabled enable trusted execution engine. Txe hmrfpo enable disable enable host me region flash protection overwrite. Txe firmware update enabled disabled enable firmware update. Tx...
Page 84
Copyright © 2013 congatec ag qa30_qa3em11 84/91 10.4.30.1 nic configuration submenu feature options description link speed auto negotiated 10 mbps half 10 mbps full 100 mbps half 100 mbps full specifies the port speed used for the selected boot protocol. Wake on lan disabled enabled enables wake on ...
Page 85
Copyright © 2013 congatec ag qa30_qa3em11 85/91 feature options description aperture size 128mb 256mb 512mb selects aperture size value. Pavc enable disable enable or disable protected audio video control. 10.5.2 south bridge submenu feature options description ►azalia hd audio submenu azalia hd aud...
Page 86
Copyright © 2013 congatec ag qa30_qa3em11 86/91 feature options description azalia hdmi codec enabled disabled enable azalia hdmi codec hdmi port b enabled disabled enable hdmi port b audio. Hdmi port c enabled disabled enable hdmi port c audio. 10.5.2.2 usb submenu feature options description usb o...
Page 87
Copyright © 2013 congatec ag qa30_qa3em11 87/91 10.5.2.3 pci express configuration submenu feature options description pcie noncompliance card not supported supported enable pcie 1.0 device support pci express port 0 disabled enabled enable pcie port 0. Speed auto gen 2 gen 1 configure pcie port 0 s...
Page 88
Copyright © 2013 congatec ag qa30_qa3em11 88/91 feature options description enter setup if no boot device no yes select whether the setup menu should be started if no boot device is connected. Enable popup boot menu no yes select whether the popup boot menu can be started. Boot priority selection de...
Page 89
Copyright © 2013 congatec ag qa30_qa3em11 89/91 10.7 security setup select the security tab from the setup menu to enter the security setup screen. 10.7.1 security settings feature options description administrator password enter password specifies the setup administrator password. Hdd security conf...
Page 90: Additional Bios Features
Copyright © 2013 congatec ag qa30_qa3em11 90/91 11 additional bios features the conga-qa30 uses a congatec/ami aptioefi that is stored in an onboard flash rom chip and can be updated using the congatec system utility (version 1.5.0 and later), which is available in a dos based command line, win32 co...
Page 91: Industry Specifications
Copyright © 2013 congatec ag qa30_qa3em11 91/91 12 industry specifications the list below provides links to industry specifications that apply to congatec ag modules. Specification link qseven ® specification http://www.Qseven-standard.Org/ qseven ® design guide http://www.Qseven-standard.Org/ low p...