1. DL manuals
  2. Connect One
  3. Motherboard
  4. II-EVB-365SMT
  5. User Manual

Connect One II-EVB-365SMT User Manual

Manual is about: Instant Internet

Summary of II-EVB-365SMT

  • Page 1

    International: connect one ltd. 20 atir yeda street kfar saba 44643, israel phone: +972-9-766-0456 fax: +972-9-766-0461 email: sales@connectone.Com http://www.Connectone.Com pub. No. 23-3830-01 instant internet evaluation board ii-evb-365smt user manual version 1.00 copyright © 2011 connect one ltd..

  • Page 2

    International: connect one ltd. 20 atir yeda street kfar saba 44643, israel phone: +972-9-766-0456 fax: +972-9-766-0461 email: sales@connectone.Com http://www.Connectone.Com pub. No. 23-3830-01 information provided by connect one ltd. Is believed to be accurate and reliable. However, connect one ass...

  • Page 3

    Connect one ii-evb-365 smt user’s manual 3 table of contents 1. Introduction ............................................................................................................ 4 2. Unpacking ......................................................................................................

  • Page 4: Introduction

    Connect one ii-evb-365 smt user’s manual 4 1. Introduction this manual is intended to familiarize customers with connect one’s instant internet evaluation board ii-evb-365smt. The ii-evb-365smt is an evaluation platform for the nano wireach™ smt module, which is a secure serial-to-wifi / serial-to- ...

  • Page 5

    Connect one ii-evb-365 smt user’s manual 5 the other db-9 connector to the com1 or com2 serial port on your pc, or to the serial port of your embedded device. Usb: connect one the device end of the usb cable to the evb-365 smt usb connector (j10) and connect the other end to a host usb port on your ...

  • Page 6

    Connect one ii-evb-365 smt user’s manual 6 3. In the main window of the utility, click the dumb terminal icon. 4. In the dumb terminal window, enter the at+i command to verify that the ichip is communicating with your pc. You should receive an i/ok in response. If this has failed, click the ―setup p...

  • Page 7: Additional Connections

    Connect one ii-evb-365 smt user’s manual 7 7. Change the lan type parameter to 2 (lan) using the following command: at+iltyp=2 8. Enter at+idown in order to reset the module and connect to the lan network. To test the connection, use the ichipconfig utility to perform any activity that requires netw...

  • Page 8

    Connect one ii-evb-365 smt user’s manual 8 connectors and switch positions rs232 serial connection +9vdc usb power jack power switch module reset mode select usb connection rj45 lan nano wireach smt module pot for a/d input spi connection cellular modem gpio switches.

  • Page 9

    Connect one ii-evb-365 smt user’s manual 9 8. Ii-evb-365 smt bill of materials item quant. Reference part manufacturer 1 3 c1,c39,c40 47pf any 2 9 c2,c4,c5,c6,c8,c10,c13,c16,c36 470nf any 3 5 c3,c9,c30,c31,c38 10uf/6.3v any 4 18 c7,c11,c12,c14,c15,c17,c18,c19,c20,c23, c24,c25,c26,c27,c28,c29,c35,c37...

  • Page 10

    Connect one ii-evb-365 smt user’s manual 10 appendix 1: nano wireach smt mechanical views.

  • Page 11

    Connect one ii-evb-365 smt user’s manual 11 appendix 2: installing usb drivers on a pc installing the usb driver: the usb driver is supplied in three separate files: sabalo.Inf, ichip.Inf and usbser.Sys. These files may be obtained on the connect one web site under: support >> drivers & utilities at...

  • Page 12

    Connect one ii-evb-365 smt user’s manual 12 6. When prompted with the message “what do you want the wizard to do?” select install the software automatically (recommended). See figure 2. Figure 2.

  • Page 13

    Connect one ii-evb-365 smt user’s manual 13 7. Windows will install the driver. See figure 3. 8. When a pop-up window reports that the software for the new hardware — connect one sabalo usb device — has not passed windows logo testing, select continue anyway. See figure 4. Figure 3 figure 4.

  • Page 14

    Connect one ii-evb-365 smt user’s manual 14 9. The usb driver is now installed and ready for use. See figure 5. Viewing the properties of the new driver: 1. From the windows task, click start > settings > control panel. 2. Double-click the system icon. 3. In the dialog box displayed, select the hard...

  • Page 15

    Connect one ii-evb-365 smt user’s manual 15 figure 6.

  • Page 16

    Connect one ii-evb-365 smt user’s manual 16 faqs q: what should i do if windows does not automatically locate the driver for the new hardware? A: please use the ―back‖ button to browse to the previous step and manually browse to the directory of the ichip configuration utility, usually located in ―c...

  • Page 17

    Connect one ii-evb-365 smt user’s manual 17 appendix 3: wifi configuration notes introduction the at+i programmer’s manual includes full details for wifi configuration. Please visit the support section on connect one’s website to obtain the last version. The following is a partial overview of wifi r...

  • Page 18

    Connect one ii-evb-365 smt user’s manual 18 ichip wireless lan environment configuration parameters wlch (factory default: 0) in infrastructure mode, the wlch parameter must be set to 0. Other available values (1..13) designate the preferred communication channel while in ad-hoc mode. Wlsi (factory ...

  • Page 19

    Connect one ii-evb-365 smt user’s manual 19 [0..3600]. When wlps is set to 0, the marvell chipset power save is disabled, even if ichip enters power save mode. Wlpp (factory default: empty) this parameter sets the wireless lan wpa1-psk pass-phrase to be used in generating the wpa1-psk encryption key...

  • Page 20

    Connect one ii-evb-365 smt user’s manual 20 sig lvl -- signal level [%], in the range 0..100 lnk qual -- link quality [%], in the range 0..100 the configuration website contains a live status page with this and some additional status information: figure 8: wireless lan web status display ichip wirel...

  • Page 21

    Connect one ii-evb-365 smt user’s manual 21 when at+i wltr is issued, transmission rate is limited for the duration of the session until another at+iwltr command is issued, or ichip is power-cycled. Placement and range guidelines 802.11b/g wireless lan devices connect to wireless lan access points o...

  • Page 22

    Connect one ii-evb-365 smt user’s manual 22 appendix 4: spi host interface introduction the nano wireach/socket iwifi contains an spi slave port, which allows a host processor to interface the ichip using an spi master port. The spi data transfer shall be based on the 'command-response' principle. (...

  • Page 23

    Connect one ii-evb-365 smt user’s manual 23 the module’s spi driver asserts the spi control gpio to indicate to the host to start reading the entire packet, starting with the header word and followed by the packet payload, whose length matches the 12 lsbits of the header word. All the received bytes...