Bluestorm/lp low profile pci multi-port serial adapter contact information: connect tech inc. 42 arrow road guelph, ontario, canada n1k 1s6 tel: 519-836-1291 (international) 800-426-8979 (canada & usa) fax: 519-836-4878 email: sales@connecttech.Com support@connecttech.Com url: www.Connecttech.Com ct...
Bluestorm/lp installation guide, connect tech inc. 2 revision 0.05 limited lifetime warranty connect tech inc. Provides a lifetime warranty for all connect tech inc. Products. Should this product, in connect tech inc.'s opinion, fail to be in good working order during the warranty period, connect te...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 3 table of contents limited lifetime warranty ..............................................................................................................................2 copyright notice................................................
Bluestorm/lp installation guide, connect tech inc. 4 revision 0.05 customer support overview if you experience difficulties after reading the manual and/or using the product, contact the connect tech reseller from which you purchased the product. In most cases the reseller can help you with product ...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 5 introduction connect tech inc. Proudly presents the bluestorm/lp, a high-speed multi-port communication adapter for low profile pci compatible computers. The bluestorm/lp provides you with up to eight high performance serial ports wi...
Bluestorm/lp installation guide, connect tech inc. 6 revision 0.05 hardware installation installing the bluestorm/lp into your system turn the power off to your computer and open it to expose the expansion slots (consult your system’s documentation for more information about this procedure). Choose ...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 7 multi-drop slave mode in this mode the txd+/- line driver is enabled only when data is transmitted and rxd+/- is enabled all the time. This mode is typically used in multi-drop 4-wire connections. This mode requires software setup in...
Bluestorm/lp installation guide, connect tech inc. 8 revision 0.05 figure 2: bluestorm/lp jumper block locations 4 port models figure 3: bluestorm/lp jumper block locations, 8 port models.
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 9 jumper configuration in the following example, the four rs-422/485 ports are set as follows: port 1 is set for half duplex, port 2 is set for half duplex; port 3 is set for full duplex, and port 4 is set for multi-drop slave. Figure ...
Bluestorm/lp installation guide, connect tech inc. 10 revision 0.05 connectors/pinouts table 1: db-25 female pinouts (2 port connector) pin no. Port no. Rs-232 signal signal direction rs-422/485 signal signal direction 1 2 sg signal gnd. Sr signal ref. 2 1 txd output txd- output 3 1 rxd input txd+ o...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 11 table 2: hdb-44 pinouts (4 port connector) pin no. Port no. Rs-232 signal signal direction rs-422/485 signal signal direction 1 1 txd output txd- output 2 1 rts output rts- output 3 1 dcd input rxd+ input 4 1 rxd input txd+ output 5...
Bluestorm/lp installation guide, connect tech inc. 12 revision 0.05 table 3: vhdci-68 female (8 port connector) pin no. Port no. Rs-232 signal signal direction rs-422/485 signal signal direction 1 1 txd output txd- output 2 1 ri input cts+ input 3 1 dcd input rxd+ input 4 1 dtr output rxd- input 5 1...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 13 table 3: vhdci-68 female (continued) pin no. Port no. Rs-232 signal signal direction rs-422/485 signal signal direction 47 6 rts output rts- output 48 6 dsr input cts- input 49 6 rxd input txd+ output 50 6 cts input rts+ output 51 5...
Bluestorm/lp installation guide, connect tech inc. 14 revision 0.05 figure 5: rs-422/485 wiring diagrams software installation the bluestorm/lp provides support for qnx, linux, windows 2000/xp/xpe and windows nt. Please refer to the readme.Txt files found in the appropriate directories on the bluest...
Bluestorm/lp installation guide, connect tech inc. Revision 0.05 15 you can now verify the presence of bluestorm/lp serial ports in your system by going to start - control panel – system properties – hardware - device manager – multi-port serial adapters . Specifications operating environment storag...