1. DL manuals
  2. Connect Tech
  3. Network Card
  4. Xtreme/GbE
  5. User Manual

Connect Tech Xtreme/GbE User Manual

Manual is about: Managed Carrier Ethernet Switch

Summary of Xtreme/GbE

  • Page 1

    1 xtreme/gbe managed carrier ethernet switch users guide connect tech inc. 42 arrow road guelph, ontario n1k 1s6 tel: 519-836-1291 toll: 800-426-8979 (north america only) fax: 519-836-4878 email: sales@connecttech.Com support@connecttech.Com web: www.Connecttech.Com ctim-00429 revision: 0.01, novemb...

  • Page 2

    Connect tech – xtreme/gbe - user manual revision 0.01 2 table of contents customer support overview .......................................................................................................................... 3 contact information...........................................................

  • Page 3

    Connect tech – xtreme/gbe - user manual revision 0.01 3 mechanical details ........................................................................................................................................25 3d step model download...................................................................

  • Page 4

    Connect tech – xtreme/gbe - user manual revision 0.01 4 limited lifetime warranty connect tech inc. Provides a lifetime warranty for all connect tech inc. Products. Should this product, in connect tech inc.'s opinion, fail to be in good working order during the warranty period, connect tech inc. Wil...

  • Page 5

    Connect tech – xtreme/gbe - user manual revision 0.01 5 introduction connect tech’s xtreme/gbe managed carrier ethernet switch provides carrier grade ethernet switching capabilities in an extremely small embedded form factor. Excellent for high-end applications such as mobile and microwave backhaul,...

  • Page 6

    Connect tech – xtreme/gbe - user manual revision 0.01 6 product features and specifications feature description ethernet switch engine vitesse vsc7428 carrier grade ethernet switch chipset a powerful embedded 416 mhz risc 32-bit cpu with ddr2 external memory and dma-based frame extraction and insert...

  • Page 7

    Connect tech – xtreme/gbe - user manual revision 0.01 7 block diagram gbe port5 gbe port6 gbe port7 gbe port8 gbe port1 gbe port2 gbe port3 gbe port4 spi flash ddr2 sdram dc/dc power modules external leds 8-port carrier ethernet managed switch chipset (vitesse vsc7428) +9v to 36v wide input manageme...

  • Page 8

    Connect tech – xtreme/gbe - user manual revision 0.01 8 connector locations rj-45 models part number shown: xdg004 rugged models part number shown: xdg009 xdg004 xdg007.

  • Page 9

    Connect tech – xtreme/gbe - user manual revision 0.01 9 jumper and connector summary designator connector description p5-p12 (xdg004/5/6) rj-45 10/100/1000 ethernet connectors p5a-h (xdg007/8/9) 2x5 2mm rugged locking connector 10/100/1000 ethernet connectors p4 2x20 1mm connector external led conne...

  • Page 10

    Connect tech – xtreme/gbe - user manual revision 0.01 10 detailed feature pinouts and descriptions 10/100/1000 ethernet rj-45 connector function lan connector green only = 1gbps green and yellow = 100mbps yellow only = 10mbps locations p1-p8 (xdg004/5/6) xdg connector pn 7498111120 - manufacturer: w...

  • Page 11

    Connect tech – xtreme/gbe - user manual revision 0.01 11 external led connectors function external port leds locations p4 xdg connector pn df20g-40dp-1v(56) - manufacturer: hirose mating connector pn df20a-40ds-1c - manufacturer: hirose pinout.

  • Page 12

    Connect tech – xtreme/gbe - user manual revision 0.01 12 idc serial management connector (xdg004/5/6) function serial management connector top view side view looking at connector locations p2 xdg connector pn: tsw-105-08-l-d-ra - manufacturer: samtec mating connector pn: any idc 2x5 0.1” pitch femal...

  • Page 13

    Connect tech – xtreme/gbe - user manual revision 0.01 13 system jumper block function system jumper block locations j1 type 2x3 (or 2x4) 2mm pitch jumper block pinout pos signal name description a reset# jumper on = xdg goes into reset jumper off = xdg boots up normally note: a reset button can be i...

  • Page 14

    Connect tech – xtreme/gbe - user manual revision 0.01 14 pc/104 connector function pc/104 connector * shown uninstalled locations p9, p10 type pc/104 stacking connector pinout pinout compliant to pc/104 specification pinout. This connector is only used to source power for the board (+12v), all other...

  • Page 15

    Connect tech – xtreme/gbe - user manual revision 0.01 15 input power the xtreme/gbe can be powered by either an external 3.5mm pitch phoenix style connector or directly via the pc/104 or pcie/104 bus. Powering via the phoenix style connector is called standalone mode powering via the pc/104 connecto...

  • Page 16

    Connect tech – xtreme/gbe - user manual revision 0.01 16 on-board indicator leds led function details d1 xtreme/gbe main status led normal behavior = blinking every 1000ms programming = blinking every 100ms firmware check error = blinking every 100ms (with d2) d2 xtreme/gbe error state led error sta...

  • Page 17

    Connect tech – xtreme/gbe - user manual revision 0.01 17 advanced management interface the management interface for the xtreme/gbe can be accessed through a command line interface via com port or through a web gui interface. Cli management via the pcie/104 bus the xdg006 and xdg009 models of the xtr...

  • Page 18

    Connect tech – xtreme/gbe - user manual revision 0.01 18 cli commands show the show command will be where you can view all status and current configuration settings of the xtreme/gbe. Type show ? For details on what can be viewed. Some examples of using show would be: show ip interface brief show in...

  • Page 19

    Connect tech – xtreme/gbe - user manual revision 0.01 19 web gui management interface accessing the web gui there are two ways to access the web interface for first time use. Method #1 - using the default shipping ip this method does not require having access to the cli interface. By default the xtr...

  • Page 20

    Connect tech – xtreme/gbe - user manual revision 0.01 20 web gui management overview configuration settings monitor status and current settings help button press at any page to get detailed information on what the settings are, and what to change. Logout button run diagnostic utilities maintenance s...

  • Page 21

    Connect tech – xtreme/gbe - user manual revision 0.01 21 factory default configuration the factory default configuration is a vlan unaware l2 switch with automatic learning/ageing and auto negotiation enabled on all ports: system: the system name string is empty. Console: the password string is empt...

  • Page 22

    Connect tech – xtreme/gbe - user manual revision 0.01 22 typical hardware installation procedure instructions for standalone operation 1. Ensure all external system power supplies are off. 2. Plug in external power into the external input power connector. 3. Ensure voltage is in the range of +9v to ...

  • Page 23

    Connect tech – xtreme/gbe - user manual revision 0.01 23 stacking multiple xtreme/gbe boards to achieve higher port densities due to the stacking nature of the pc/104 and pcie/104 for factor board, the xtreme/gbe can easily be stacked with other xdgs to achieve higher switch port densities. Some sim...

  • Page 24

    Connect tech – xtreme/gbe - user manual revision 0.01 24 thermal details all components on the xtreme/gbe managed carrier ethernet switch rare rated to a maximum operating temperature of -40°c to +85°c. The carrier has been fully tested to run in both extremes in an environmental test chamber with 1...

  • Page 25

    Connect tech – xtreme/gbe - user manual revision 0.01 25 mechanical details 3d step model download a complete set 3d step model files for the xtreme/gbe products can be downloaded here: http://www.Connecttech.Com/ftp/3d_models/xdg-gen2_3d_model.Zip 2-d dimension drawings all dimensions are in millim...

  • Page 26

    Connect tech – xtreme/gbe - user manual revision 0.01 26 below is a dimensioned drawing of the xdg007. These measurements will be the same for the xdg008 and xdg009 as well..

  • Page 27

    Connect tech – xtreme/gbe - user manual revision 0.01 27 cables and cable kit information the xtreme/gbe managed carrier ethernet switch has various cabling options. Cables xdg004/5/6 models cag104 - these models each ship with a 2x5 0.1” idc to db-9 cable (cag104) to access the serial management in...

  • Page 28

    Connect tech – xtreme/gbe - user manual revision 0.01 28 detailed cable information rj-45 panel mount to 10-pin minitek w/latch - cbg117 rj45 (8p8c) signal 10-pin minitek 1 mx1- 1 2 mx1+ 2 3 mx2- 3 4 mx2+ 4 shell shell 5 shell shell 6 7 mx3- 7 8 mx3+ 8 9 mx4- 9 10 mx4+ 10

  • Page 29

    Connect tech – xtreme/gbe - user manual revision 0.01 29 rj-45 panel mount to rj-35 - p115-012 rj45 (8p8c) male signal rj45 (8p8c) female 1 mx1- 1 2 mx1+ 2 3 mx2- 3 4 mx2+ 4 7 mx3- 7 8 mx3+ 8 9 mx4- 9 10 mx4+ 10

  • Page 30

    Connect tech – xtreme/gbe - user manual revision 0.01 30 db-9 to 10-pin idc cable – cag104 db-9 side a signal 2x5 0.1” idc side b 1 - - 2 rx 3 3 tx 5 4 - - 5 gnd 9 6 - - 7 - - 8 - - 9 - - - - -.

  • Page 31

    Connect tech – xtreme/gbe - user manual revision 0.01 31 db-9 to 10-pin minitek w/latch - cbg117 db-9 cn1 signal 2x5 2mm minitek cn2 1 - - 2 rx 2 3 tx 3 4 - - 5 gnd 5 6 - - 7 - - 8 - - 9 - - - - -.