Connects2 CAM-MB2-AD Instruction Manual - Www.Connects2.Com
of
4
www.connects2.com
3
FITTING GUIDE
1. Please ensure the ignition is switched off and the key removed from the
ignition. Remove the OEM NTG 5.0 head unit.
2. Disconnect the original grey LVDS connector from the head unit as shown
and connect the LVDS harness from the interface (Fig 1, 4). Disconnect the
vehicle power harness (quadlock connector) and connect the male end of
the supplied vehicle power T-harness (Fig1, 2).
3. Plug the original grey LVDS connector removed in step 2, into the green
LVDS connector on the interface. Connect the white 5 way connector from
the other end of the supplied LVDS cable (Fig 1, 4) to the interface. Connect
the black 8 way connector of the vehicle power T-harness (Fig 1, 2) to the
interface.