Connects2 CTUSK02-AMP Instruction Manual - Www.Connects2.Com
www.connects2.com
4
Configuration Menu...continued
Preferences
Driver Position
Right
Camera Connected Yes
Reverse Priority Park Assist
Park Brake Source Speed
Climate 5S
Restore factory settings
o Preferences -
Driver Position - Select Left or Right depending
upon vehicle configuration.
Camera Connected - Select Yes if an optional
camera is connected.
Reverse Priority* - Select which image (Camera
or Park Assist) will be shown by default when
reversing. The driver can select the desired
image by pushing the Source button (Fig.3)
while reversing. (*Note this option is only
available when Camera Connected is set to
Yes)
Park Brake Source - Set to Speed, Brake or
Always On.
Climate - Select how long the climate display
should be shown on the head unit when ad-
justed. Select between the range of 3 seconds
and 30 seconds.
Restore factory settings - Reverts all
Infodapter settings to factory defaults.
(This does not restore vehicle settings)
Infodapter Settings
Screen Size/Position
Picture Settings
Preferences
o Picture Settings - Adjust Brightness, contrast and colour saturation. Legal Information Please consult the relevant road traffic laws governing the country in which this product is being operated. No liability is accepted for material damage, loss or personal injury, directly or indirectly, from installation and operation of this product. This product should only be operated when safe to do so. o Driving Mode - The driving mode button can be used as normal. The graphic for the mode will be shown on the head unit. o Park Assist - The park assist button can be used as normal to activate/decactivate park assist. The graphic will be shown on the head unit.