Connevans 220 LITE User Manual - 220 Lite
2
220 Lite
Version 0.2 220 Lite User Guide
Step 2
Turning on
Check the channel number of the receiver, is it the
same channel as the transmitter?
Turn on the units by moving the toggle switch to the
left towards the middle. The battery low indicator
should give you a confidence wink.
When the battery charge becomes low, the indicator
will light and remain lit until the battery is changed.
1
The hearing aid user should listen at
arm’s length to somebody talking, to
establish the level of sound from the
hearing aid alone.
2 The hearing aid wearer should take
the receiver and place the neck loop
around their neck. They should then
turn their hearing aid(s) to the ‘T’
position.
3
The helper should take the 220 Lite
transmitter and walk to the other side
of the room while talking into the
microphone at 150mm (the length of
a biro) from the mouth.
4
The hearing aid user should be able
to hear the helper through the
220 Lite receiver by adjusting the
volume up to a comfortable level.
Congratulations, it’s as simple as that!
Step 3
Using the inductive neckloop with a hearing aid
Transmitter
Receiver