Conrad C-Easy D1000 User Manual - page 12
OPERATION
12
OUTGOING CALL
(I) make another call
(II) Suspend the active call and resume tel.
Outgoing call - During Idle state :
Lift up handset and dial number
Or
Dial number and press
button
Or
Press
button and dial the number
Outgoing call - During one active call state:
During telephone conversation, you may :
1. press
to accept making the 2nd call
2. dial the 2nd phone number. When the 2nd
call get through, the phone will enter to 1
held call and 1 active call state.
conversation elsewhere - During 1 active call
state :
During telephone conversation, you may hold
the tel. Line, unplug the telephone set and install
it in other room to continue the tel. conversation.
Or
Press
button and dial the number if
headset is available.
1. press
to choose "suspend" mode
(the tel. Line should remain connected).
2. press
to enter the "suspend" mode
3. enter the "suspend digit" (must be 0-9 a
single digit number).
4. unplug the telephone set and install it in other
place.
5. press the
button and then select the
FUNCTION mode to browse for the
"RESUME" mode
6. enter the "suspend digit" to resume
conversation ( refer to details in FUNCTION
section )
NOTE:
1. When the telephone line in 1 held & 1 active
call state, you may press
to toggle
between the 2nd and 1st call.
2. Depending on the ISDN system, the held
party will hear the music when on hold.
YES
YES
YES
ABC
000'25
2nd Call?
one active call state
12345
Disconnect?
YES
0
9
001'14
Toggle?
telephone line 1 held & 1 active call state
ABC
000'11
Suspend?
Suspend Digit >>
YES
15:27:45 03 JUL 01 Tue
Suspend succ!
0
9
Resume?
Resume succ
000'15
2nd Call?
0
9
YES