1. DL manuals
  2. Conrad
  3. Switch
  4. FS20 ST
  5. Operating Instructions Manual

Conrad FS20 ST Operating Instructions Manual

Manual is about: Wireless switch socket

Summary of FS20 ST

  • Page 1

    Operating instructions version 08/07 wireless switch socket „fs20 st“ item no. 62 30 04.

  • Page 2: Introduction

    2 introduction dear customer, thank you for purchasing this product. This product meets the requirements of both current national and european guidelines. Please read the user manual completely and observe the safety and operation instructions before using the product! This user manual belongs to th...

  • Page 3: Table of Contents

    3 table of contents page 1. Prescribed use ................................................................................. 4 2. Scope of delivery ............................................................................. 4 3. Explanation of icons ...................................................

  • Page 4: 1. Prescribed Use

    4 1. Prescribed use the wireless switch socket ‘fs20 st’ functions exclusively in conjunction with the fs20 wireless control system. The wireless control system can switch a device that is connected to the wireless switch socket on or off or dim the device without the use of cables (refer to technic...

  • Page 5: 3. Explanation of Icons

    5 3. Explanation of icons the icon with a lightning flash in a triangle is used to alert you to potential personal injury hazards such as electric shock. The icon with an exclamation mark in a triangle points to important instructions in this user manual that must be ob- served. The ‘hand’ symbol in...

  • Page 6

    6 • the product is designed in accordance with protection class i. The only voltage source that may be used is that of the correct power socket-outlet (230v~/50hz) with the protective earth conductor of the public power supply system. • the product is not a toy and should be kept out of the reach of...

  • Page 7: 5. Control Panel

    7 5. Control panel control keys with integrated led socket for consumer loads (230v~/50hz, max. 16a) on the back side there is a shock-proof plug that must be plugged into a socket of the public power supply system (230v~/50hz). Quick function test • plug the ‘fs20 st’ into a power socket with an ea...

  • Page 8

    8 6. Registering a fs20 transmitter to register the wireless switch socket ‘fs20 st’ with a fs20 transmitter (for example, a remote control from the fs20 wireless control system or other devices, such as the load monitor ‘fs20 fms’), proceed as follows: • press and hold the control button on the ‘fs...

  • Page 9: 7. Operation

    9 7. Operation a) remote control operation switching on: briefly press the right button of the programmed button combination switching off: briefly press the left button of the programmed button combination b) controlling the fs20 device the procedure varies, depending upon the fs20 device. Please r...

  • Page 10: 8. Timer Function

    10 8. Timer function the wireless switch socket can also be used as a timer. As soon as a switching time has been programmed, the ‘fs20 st’ remains switched on for the programmed length of time after each power-on command. After this time has expired, it automatically switches off. The timer is prog...

  • Page 11: Please Note:

    11 please note: if the time measurement is not ended manually, the timer programming mode will automatically be ended after 270 minutes (4 hours 30min). The timer is then programmed for a on-time of 270 minutes (4 hours 30min). B) timer operation x x x x x starting the timer there are two different ...

  • Page 12: Or:

    12 • the control indicator/led on the wireless switch socket blinks. • now briefly press the control button on the wireless switch socket. The timer programming mode is ended and the timer function is removed. You can now use the wireless switch socket again in its normal manual operation mode. X x ...

  • Page 13: Into The Fs20 Address System

    13 9. Integrating the wireless switch socket into the fs20 address system the ‘fs20 st’ wireless switch socket can be integrated into the address system of the fs20 wireless control system via the latter’s addressing scheme using single addresses, function groups, local and global masters. More deta...

  • Page 14

    14 • now press and hold (for at least 0.4 seconds) your remote control button that has been assigned to the reception channel that you wish to delete. • afterwards the programming mode is automatically ended and the corresponding channel is deleted from the address list of the wireless switch socket...

  • Page 15: 11. Handling

    15 11. Handling the product should only be used in dry indoor areas. The following unfavourable conditions at the installation site, during opera- tion or transport are to be avoided: - moisture or excessive air humidity - extreme cold or heat - direct sunlight - dust or flammable gases, vapours or ...

  • Page 16: 12. Maintenance and Cleaning

    16 this product is not a toy and should be kept out of the reach of children. Even a fall from a low height can damage the product. 12. Maintenance and cleaning this product does not require maintenance. Repairs or maintenance work may only be carried out by a skilled technician! Before cleaning, un...

  • Page 17: 14. Information On The Range

    17 14. Information on the range • the fs20 wireless control system, including the ‘fs20 st’, works in the 868mhz range. This range is also used by other devices and radio services. Therefore devices that operate on the same or neighbouring frequency may restrict both the operation of the ‘fs20 st’ a...

  • Page 18: Please Note:

    18 please note: do not place several wireless receivers (for example switch sockets) directly next to each other, because they can nega- tively affect each other (range may be reduced!). Keep them separated by a distance of at least 20cm..

  • Page 19

    19 15. Declaration of conformity (doc) we, conrad electronic, klaus-conrad-straße 1, d-92240 hirschau (ger- many), hereby declare that this product complies with the fundamental requirements and other relevant regulations of directive 1999/5/eg. You can find the declaration of conformity for this pr...

  • Page 20: Http://www.Conrad.Com

    Conrad im internet http://www.Conrad.Com http://www.Conrad.Com imprint these operating instructions are published by conrad electronic se, klaus-conrad-str. 1, d-92240 hirschau/germany. No reproduction (including translation) is permitted in whole or part e.G. Photocopy, microfilming or storage in e...