1. DL manuals
  2. Conrad
  3. Home Automation
  4. Sygonix 1597114
  5. Instruction Manual

Conrad Sygonix 1597114 Instruction Manual

Manual is about: Home Starter Kit

Summary of Sygonix 1597114

  • Page 1

    App instruction manual sygonix home starter kit item no. 1597114 www.Conradconnect.De.

  • Page 2

    - 2 - contents conrad connect .............................................. 4 symbols ........................................................... 4 core functions ................................................. 5 app to device communication ......................... 6 app – installation ............

  • Page 3

    - 3 - sensors – add sensor ................................... 19 sensors – sensor page ................................. 21 sensors – delete sensor ............................... 22 sensors – configure sensor .......................... 23 sensors – enable/disable sensor .................. 24 funct...

  • Page 4

    - 4 - conrad connect your product is compatible with the conrad connect iot platform at www.Conradconnect.De . You can set up a personal account at the given url. Symbols the following instructional symbols are used in this instruction manual. This triangle indicates important instructions contained...

  • Page 5: Measuring and Recording

    - 5 - core functions measuring and recording sensors measure and record illuminance, noise, pressure, temperature and humidity. Event minitoring events are monitored and logged in the app. Alert mode you are alerted of events important to you. Night light mode determine the behaviour of the gateway ...

  • Page 6

    - 6 - app to device communication ■ in order to add a new device to the app, the mobile device that runs the app and the smart device must connect to your wlan. ■ once a new device was added, you can control the smart device through the app via wlan or mobile network. ■ subnetting: if you subnetted ...

  • Page 7

    - 7 - app – installation apps are available for android and ios mobile devices. Make sure your mobile device satisfies the minimum requirements as outlined on the app page before downloading. 1. Head to the respective app store and download the app named 'sygonix home' onto your mobile device. 2. Se...

  • Page 8: Setting Up A New Account

    - 8 - app – user account a 'sygonix' account is required for you to operate the smart device. Your smart device cannot be linked to two accounts at the same time. Adding the smart device to a second account will remove it from the first account. Reset the smart device before linking to another accou...

  • Page 9: Account Settings

    - 9 - 4. If you login successfully, the landing page with the device list will appear. -if no smart devices have yet been set up, the device list is blank. Account settings on the landing page press to open the account settings. Account settings allow you to: ■ add a profile picture ■ change the acc...

  • Page 10

    - 10 - app – landing page add new devices app settings account settings device list show scenes show devices.

  • Page 11

    - 11 - app – settings press to open app settings: language select app language price select currency set the charge for one kwh manual download operating instructions about see app version and available app updates. Links to www.Conrad.Com and www.Conradconnect.De app – updates app software updates ...

  • Page 12

    - 12 - smart devices – firmware update the firmware of your smart device is updated via the app. Available firmware updates are indicated in the device settings. For all firmware updates the smart device and the mobile device that runs the app must be connected to the same wlan network during the up...

  • Page 13

    - 13 - gateway – add during set-up make sure to keep the mobile device running the app and the smart device within receiving distance of the wireless access point. 1. Connect your mobile device running the app to your wlan network. 2. Open the app and navigate to the landing page. 3. Touch if it is ...

  • Page 14

    - 14 - gateway – gateway page gateway settings modes add a new sensor back to home sensor list.

  • Page 15

    - 15 - gateway – settings 1. Select a gateway from the device list on the landing page. 2. Press to open the gateway settings. 3. Adjust settings: name give your gateway a name. Firmware version indicates the firmware version of the gateway. Update firmware if updates are available. About mac addres...

  • Page 16: Indications

    - 16 - gateway – indicator light indications observe the indicator lights during set up and use of your smart device. Indication status/action fast blue flashing (4 times per sec) ready to connect to network stays blue for 5s then off gateway successfully connected to router slow blue flashing (2 ti...

  • Page 17: Manual Control

    - 17 - manual control the gateway indicator light can be turned on and off manually. Configure the manual control as follows: 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch night light mode . 5. Under the light section , se...

  • Page 18: Option 1

    - 18 - gateway – reset attention! Resetting removes all configuration data in the gateway and any linked external sensors. Option 1 1. Select the gateway from the device list. 2. Touch . 3. Touch reset to factory settings . 4. Confirm the prompt to reset. 5. The device is reset and removed from the ...

  • Page 19: +Add New Sensor

    - 19 - sensors – sensor types the gateway itself features the following built-in sensors: ■ light sensor ■ noise sensor ■ pressure sensor other sensors are external sensors, which can be added and removed again if required. The gateway sensors cannot be removed. Sensors – add sensor only sensors com...

  • Page 20: Rename A Sensor

    - 20 - 7. You will be asked to name the sensor. Enter a name and confirm. -if a sensor device comprises more than one sensor, you will be asked to name each sensor. 8. Touch to return to the landing page. 9. The sensor is added to the sensor list. -a device may be a multiple-in-one sensor. For such ...

  • Page 21: Measuring

    - 21 - sensors – sensor page on the gateway page, touch a sensor to view sensor details. Measuring for sensors that measure and record, you can view the statistics. Graph date/time hour/day/month switch time.

  • Page 22: Logging

    - 22 - logging for sensors that log trigger date and time, you can view the trigger history. Trigger time sensors – delete sensor note that internal sensors (sensors built into the gateway) cannot be removed. 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gatewa...

  • Page 23: Alert Mode

    - 23 - sensors – configure sensor note that sensors that do not allow for parameter adjustment are not listed in the sensor configuration panel. 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch alert mode . 5. Select a sensor...

  • Page 24: Alert Mode

    - 24 - sensors – enable/disable sensor 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch alert mode . 5. Touch the sensor you want to enable or disable. 6. Activate enable sensor to enable, or deactivate to disable the sensor....

  • Page 25: Status

    - 25 - function – alerts status all alerts enabled all alerts disabled you can in any situation overwrite alerts manually by enabling or disabling them, irrespective of a schedule. Control alerts by schedule off off on 09:00 receive alerts 21:00 1. Go to the app landing page. 2. Touch if it is not a...

  • Page 26: Save

    - 26 - 6. Touch save . 7. Touch save once more. Saving immediately enables or disables alerts, depending on your schedule. Listen for the signal sound. ■ to disable the schedule function, deselect all weekdays from the repeat pattern. ■ if you manually disable alerts during scheduled times, the sche...

  • Page 27

    - 27 - function – night light mode night light mode works in conjunction with the manual control of the gateway indicator light. See chapter gateway – indicator light . Option 1 – without motion sensor on when night falls, the gateway indicator light comes on, and goes off again when daylight is mea...

  • Page 28: Configure Night Light Mode

    - 28 - ■ if motion is detected before the timer expires the timer is reset and restarted. Configure night light mode 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch night light mode . 5. Configure the night light mode: color...

  • Page 29: Add Alarm

    - 29 - function – alarm clock add alarm the alarm clock (alarm mode) has the function of a regular alarm clock and is configured as follows: 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch alarm mode . 5. Touch + . 6. Config...

  • Page 30: Save

    - 30 - 7. Touch save . 8. Under alarm mode , activate/deactivate the alarm. Delete alarm 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch alarm mode . 5. There are two ways to delete an alarm: -swipe left the alarm you want t...

  • Page 31: Default Scenes

    - 31 - function – scenes a scene is a collection of procedures to be executed when triggered. Open scenes as follows: 1. Go to the app landing page. 2. Touch . Default scenes configurable function yes enable all actions when you leave home. Yes disable all actions when you return home. No trigger th...

  • Page 32: Save

    - 32 - 5. Touch . Set a timer that triggers the scene and its linked actions after expiry. 6. Touch save to save the scene. Execute a scene in the scenes panel, touch the scene you want to execute. Edit a scene 1. In the scenes panel, hold down the scene you want to edit. 2. Select edit from the pop...

  • Page 33

    This is a publication by conrad electronic se, klaus- conrad-str. 1, d-92240 hirschau (www.Conrad.Com). All rights including translation reserved. Reproduction by any method, e.G. Photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the ...