1. DL manuals
  2. D.A.S.
  3. Speakers
  4. RF-12.64
  5. User Manual

D.A.S. RF-12.64 User Manual

Manual is about: reference series

Summary of RF-12.64

  • Page 1

    Reference series user’s manual antes de utilizar el equipo, lea la sección “precauciones de seguridad” de este manual. Conserve este manual para futuras consultas. Before operating the device, please read the “safety precautions” section of this manual. Retain this manual for future reference..

  • Page 2

    Rf.

  • Page 3

    Reference series reference series precauciones de seguridad safety precautions precauciones de seguridad safety precautions cajas acústicas pasivas / passive loudspeaker enclosures cajas acústicas pasivas / passive loudspeaker enclosures conserve y lea todas estas instrucciones. Siga todas las adver...

  • Page 4: Garantía

    GarantÍa warranty todos nuestros productos están garantizados por un periodo de 24 meses desde la fecha de compra. Las garantías sólo serán válidas si son por un defecto de fabricación y en ningún caso por un uso incorrecto del producto. Las reparaciones en garantía pueden ser realizadas, exclusivam...

  • Page 5: Declaration Of Conformity

    DeclaraciÓn de conformidad declaration of conformity d.A.S. Audio, s.A. C/ islas baleares, 24 - 46988 - pol. Fuente del jarro - valencia. España (spain). Declara que la : declares that : serie reference reference series cumple con los objetivos esenciales de las directivas: abide by essential object...

  • Page 6

    Manual del usuario / r / user’s manual eference.

  • Page 7

    Contents en introduction 3 general features model’s features connections 5 wiring basic connection placement and mounting placement tripod use use on with sub-18h trd-4 rotating the horns weather resistance rigging 10 warnings introduction flying with anl-2 rigging with ax-truss rigging with axa rig...

  • Page 8

    En manual del usuario / r / user’s manual eference.

  • Page 9

    Introduction 3 model’s features rf-12.85 - two-way full-range system. - trapezoidal enclosure. - tripod socket. - passive (full-range) use. - 1 x 12" woofer with 3” voice coil diameter. - small format compression driver with asc protection. - medium power. - medium sensitivity. - short / medium thro...

  • Page 10

    4 2. DecripciÓn del tuit rf-12.64 rf-15.64 rf-215.96 - two-way full-range system. - trapezoidal enclosure. - tripod socket. - passive (full-range) use. Format compression driver with asc protection. - nominal horn coverage angles (-6 db): 60ºh x 40ºv. - sound reinforcement for fixed installations. P...

  • Page 11

    Connections to ensure quality sound and minimum power loss, the speaker cable needs to have a large enough cross section depending on the cable length, number of speakers per channel and speaker impedance. The total impedance for a number of speakers in parallel is equal to the impedance of one divi...

  • Page 12

    6 - use the eight ohm table when connecting a single eight ohm speaker per channel. For instance, one in each channel of a stereo amplifier or the high frequency band of an . - use the four ohm table when connecting two eight ohm speakers to an amplifier channel. For instance, two units in parallel....

  • Page 13

    7 rf-12.85 rf-15.85 rf-12.64 figures show the block diagram and basic set- up for models and . . Rf-12.85 rf-15.85 rf-12.64 , . Passive (mono-amp) operation rf-215.85 figures show the block diagram and basic set- up for model figures show the block diagram and basic set- up for model a switch, locat...

  • Page 14

    8 active (bi-amp) operation sub-18h sub-218g figures show the block diagram and basic set- up. The is a bass unit for active systems, so an electronic crossover will be required with a crossover frequency set in the range from 80 to 125 hz. Figures show the block diagram and basic set- up. The is a ...

  • Page 15

    9 placement and mounting place the speakers ahead of the microphones. Feedback (howling) occurs when the microphones pick up the sound that comes out of the speakers and feed it back to the system. Feedback can cause damage to the speaker system. If space is limited, direct the speakers towards area...

  • Page 16

    10 rigging warnings flyable models feature 6 internal steel angles, with 2 mounting threads each, so that 12 flying points are available (2 on each side, 3 on the top panel and 3 on the bottom panel and 2 on the rear panel). Eyebolt flying points are factory sealed with m10 screws, which are replace...

  • Page 17

    11 flying with eyebolts the following illustrations show different views on eyebolt flying for a single box. The length of the back cables or chains determines the vertical angle of the box. Rigging with ax-truss the rigging hardware has been designed to fly the cabinets from structure trusses of 50...

  • Page 18

    12 once the rear side screw has been removed, the base of the will be placed on the corner, making sure that the head of the upper screw fits into the slot (3) on the base. Then the special rear side screw, provided with the hardware (4), will be fixed to the box. Ax-truss in order to attach the to ...

  • Page 19

    13 rigging with axa ax-2rf12 / ax-2rf15 array frame. Mounting instructions. 1.- flip the speakers upside down. Remove the existing speaker screws and rubber feet. Replace the screws used to attach the rubber feet to keep air from escaping. 2.- position the speakers in the desired splay angle. 3.- at...

  • Page 20

    14 ax-2rf12v / ax-2rf15v array frame. Mounting instructions. 1.- flip the speakers upside down. Remove the existing speaker screws and rubber feet. Replace the screws used to attach the rubber feet to keep air from escaping. 2.- position the speakers in the desired splay angle. 3.- attach the joinin...

  • Page 21

    15 ax-2rf12 / ax-2rf15 array frame. Mounting instructions. 1.- flip the speakers upside down. Remove the existing speaker screws and rubber feet. Replace the screws used to attach the rubber feet to keep air from escaping. 2.- position the speakers in the desired splay angle. 3.-attach the joining p...

  • Page 22

    16 rigging with axu the accessory can be fixed to the wall or the ceiling with 8mm screws and plugs. A total of eight screws and plugs are needed to do so. For more detailed information please refer to the instructions sheet included with every accessory. Axu axu rf-12.85 fixed vertically rf-12.85 f...

  • Page 23

    17 configurations rf-12.85 2xrf-12.64 2xrf-12.64 dsp-26 processor 2xsub-18h 2xsub-18h input ±1 mf/hf input ±1 mf/hf input ±1 mf/hf input ±1 mf/hf input ±1 lf input ±1 lf lf amplifier recommended, 1000 w per channel @ 4 ohms input ±1 lf input ±1 lf mf/hf amplifier recommended, 1000 w per channel @ 4 ...

  • Page 24

    18 dsp-26 processor 2x sub-218g input ±1±2 mf/hf recommended, 1400 w per channel @ 4 ohms hf amplifier recommended, 450 w per channel @ 4 ohms mf amplifier recommended, 1000 w per channel @ 4 ohms 2x rf-215.96 2x sub-218g input ±1±2 mf/hf input ±1±2 mf/hf input ±1±2 mf/hf input ±1 lf input ±1 lf lf ...

  • Page 25

    19 line drawings rf-12.64 rf-12.85 rf-15.64 rf-15.85 rf-215.85 rf-215.96 all dimensions in milimeters warning! Do not suspendfrom thishandle warning! Dono tsuspend fromthis handle ¡atenciÓn! Nocuelgue lacaja deeste asa ¡atenciÓn! Nocuelgue lacaja deeste asa 43 warning! Do not suspend from this handl...

  • Page 26

    20 line drawings sub-18h sub-218g all dimensions in milimeters specifications model rms power handling (1) peak power handling (-10 db) hf horn coverage angles(-6db) on-axis sensitivity 1 w / 1m rated maximum peak spl (2) transducers/replacement parts nominal impedance enclosure material color/finis...

  • Page 28

    Um_rf_02_en www.Dasaudio.Com d.A.S. Audio of america, inc. Sunset palmetto park 6816 nw 77th court. Miami, fl. 33166 - u.S.A. Toll free: 1-888das4usa tel. +1 305 436 0521 fax +1 305 436 0528 d.A.S. Audio asia pte. Ltd. 25 kaki bukit crescent #01-00/02-00 kaki bukit techpark 1 singapore 416256 tel. +...