D&b Audiotechnik Ci80 User Manual

Summary of Ci80

  • Page 1

    Ci80 manual (4.1 en).

  • Page 2

    Symbols on the equipment please refer to the information in the operating manual. Warning! Dangerous voltage! Contents safety precautions...............................................................3 information regarding use of loudspeakers...............................................3 ci80 ......

  • Page 3

    Safety precautions information regarding use of loudspeakers warning! Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels (from ap...

  • Page 4

    Ci80 fig. 1: ci80 loudspeaker the ci80 loudspeaker is a full range, two-way bass-reflex enclosure, utilizing an 8"/1" coaxial driver combination with a passive crossover. Coaxially mounting the 1" hf compression driver and 8" lf driver creates a very compact single driver whilst retaining the benefi...

  • Page 5

    Connections 1+ 1- 2+ 2- 1+ 1- 2+ 2- passive crossover fig. 2: connector wiring the ci80 cabinet is fitted with two nl4 connectors. All four pins of both connectors are wired in parallel. The ci80 uses the pin assignments 1+/1–. Pins 2+/2– are designated to the d&b active subwoofers. Using one connec...

  • Page 6

    Operation with e-pac (version 3 with display only) selecting ci80 (ci8) mode enables the e-pac to drive up to two ci80 loudspeakers. Lo imp mode configures the e-pac to drive a maximum of four ci80 cabinets with a 6 db reduction of input level to the speakers. The cut and hfa settings are available....

  • Page 7

    Technical specifications -5 0 5 10 -10 -15 -20 -25 -30 20 100 1k 10k 20k fig. 6: frequency response ci80 standard and cut settings ci80 system data frequency response (–5 db)...................................................................70 hz – 20 khz max. Sound pressure (1 m, free field) with d...

  • Page 8

    Manufacturer's declarations eu conformity of loudspeakers (ce symbol) this declaration applies to - ci80 z1402 manufactured by d&b audiotechnik gmbh. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later d...