E3 manual (3.1 en).
Symbols on the equipment please refer to the information in the operating manual. Warning! Dangerous voltage! Contents safety precautions...............................................................3 information regarding use of loudspeakers...............................................3 e3 ........
Safety precautions information regarding use of loudspeakers warning! Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non- critical sound levels (from a...
E3 60 90 fig. 1: e3 loudspeaker the e3 loudspeaker is a full range, two way bass-reflex enclosure which is fitted with a single 6.5" lf driver passively connected to a 1" hf compression driver. This is coupled to a constant directivity horn with a 90° x 60° dispersion. Illustrated in the drawing on ...
Operation with d6 or d12 select the controller setup e3. Within the d12 amplifier this is available in "dual channel" and "mix top/sub" mode. Up to a total of four e3 loudspeakers can be driven by each d6 or d12 amplifier channel. Controller settings for acoustic adjustment the functions cut, hfa an...
Operation with p1200a fig. 6: controls on e3 controller module up to four e3 cabinets can be driven by each p1200a power amplifier channel fitted with an e3 controller module. Fitting one e3 and one subwoofer controller module allows a single mainframe to drive four e3s and two active subwoofer cabi...
60 90 60 90 altering the hf horn dispersion the e3 hf horn can be rotated through 90°. Two dispersion angles, 90° and 60°, are engraved on the flange. The value on the horizontal edge indicates the loudspeaker's horizontal dispersion angle. Tools required: phillips screwdriver, 3 mm allen key. - rem...
Manufacturer's declarations eu conformity of loudspeakers (ce symbol) this declaration applies to: d&b e3 loudspeaker, z0300 manufactured by d&b audiotechnik gmbh. All production versions of this type are included, provided they correspond to the original technical version and have not been subject ...
