Q-sub manual (2.2 en).
Symbols on the equipment please refer to the information in the operating manual. Warning! Dangerous voltage! Contents safety precautions...............................................................3 information regarding use of loudspeakers................................................3 q-sub.....
Safety precautions information regarding use of loudspeakers warning! Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels (from ap...
Q-sub fig. 1: q-sub the q-sub is the subwoofer for the q-series. It can be used to supplement q1 and q7 cabinets in various combinations, either flown or ground stacked. The q-sub cabinet is an actively driven bass-reflex design housing a long excursion 18“ driver, its frequency response extending f...
Operation with d6 or d12 select the controller setup q-sub. Within the d12 amplifier this is available in "dual channel" and "mix top/sub" mode. Selecting q-sub mode in the d6 or d12 enables up to two q-sub cabinets to be driven by the respective channel. Selecting the q-sub configuration along with...
Technical specifications fig. 4: q-sub frequency response, standard and 100 hz settings q-sub system data frequency response (–5 db standard).................................................40 hz ... 130 hz frequency response (–5 db 100 hz mode)........................................40 hz ... 100 h...
Q-sub and q1 cabinets notice: when q-subs are used together with q1 cabinets in a flown array, the q-sub cabinets must be positioned at the top of the column. Fig. 6: q1/q-sub line array fig. 7: q1/q-sub stack fig. 8: q-sub with z5013 loudspeaker stand m20 with winder and q7 q1 and q-sub cabinets us...
Manufacturer's declarations eu conformity of loudspeakers (ce symbol) this declaration applies to - q-sub z0510 manufactured by d&b audiotechnik gmbh. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later ...
