Summary of T10
Page 1
T t10 manual 1.1 en.
Page 2
S y m b o l s o n t h e p r o d u c t p l e a s e r e f e r t o t h e i n f o r m a t i o n i n t h e m a n u a l . W a r n i n g ! D a n g e r o u s v o l t a g e ! General information t10 manual version: 1.1 en, 02/2017, d2600.En .01 copyright © 2017 by d&b audiotechnik gmbh; all rights reserved. ...
Page 3
1. Safety precautions........................................................... 4 1.1. Information regarding the use of loudspeakers.................... 4 2. T10 loudspeaker............................................................... 5 2.1. Product description.......................................
Page 4
1.1. Information regarding the use of loudspeakers potential risk of personal injury never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound ...
Page 5
2.1. Product description the t10 is a very compact loudspeaker system which can be used both, as a line array and as a high directivity point source speaker. For these applications, the t10 cabinet provides two different dispersion characteristics which can be swapped over without any tools. The cor...
Page 6
2.2. Connections the cabinet is fitted with nlt4 f/m connectors. All four pins of both connectors are wired in parallel. The cabinet uses the pin assignments 1+/1–. Pins 2+/2– are designated to actively driven subwoofers. Using one connector as the input, the second connector allows for direct conne...
Page 7
Extended near field. The transition from "line" to "arc" configuration within the array is made according to the splay progression but may allow for certain deviations due to the wiring of the cabinets in groups of up to four. "t10 ps" setup this setup has to be selected when t10 loudspeakers are co...
Page 8
Cpl function the cpl (coupling) function compensates for coupling effects between the cabinets of an array. Cpl begins gradually around 1 khz, with the maximum attenuation below 400 hz. As coupling effects increase with the length of the line array, the cpl function can be set to db attenuation valu...
Page 9
2.4. Dispersion characteristics the graphs below show dispersion angle over frequency of a single t10 cabinet plotted using lines of equal sound pressure (isobars) at –6 db and –12 db. Isobar diagram t10 line source, horizontal line source isobar diagram t10 line source, vertical isobar diagram t10 ...
Page 10
2.5. Technical specifications t10 system data frequency response (–5 db standard) 68 hz - 18 khz frequency response (–5 db cut mode) 120 hz - 18 khz max. Sound pressure (line/arc setups, 1 m, free field) d6/10d 129 db d80/d20/d12/30d 132 db max. Sound pressure (ps setup, 1 m, free field) d6/10d 127 ...
Page 11
3.1. Eu conformity of loudspeakers (ce symbol) this declaration applies to: d&b t10 loudspeaker, z0550 manufactured by d&b audiotechnik gmbh. All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design ...
Page 12
D2600.En .01, 02/2017 © d&b audiotechnik gmbh www.Dbaudio.Com.