Summary of Y10P
Page 1
Y y7p/y10p manual 1.2 en.
Page 2
S y m b o l s o n t h e p r o d u c t p l e a s e r e f e r t o t h e i n f o r m a t i o n i n t h e m a n u a l . W a r n i n g ! D a n g e r o u s v o l t a g e ! General information y7p/y10p manual version: 1.2 en, 03/2016, d2710.En .01 copyright © 2016 by d&b audiotechnik gmbh; all rights reser...
Page 3
1. Safety precautions........................................................... 4 1.1. Information regarding the use of loudspeakers.................... 4 2. Y7p/y10p loudspeaker................................................. 5 2.1. Product description................................................
Page 4
1.1. Information regarding the use of loudspeakers potential risk of personal injury never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound ...
Page 5
2.1. Product description y7p/y10p are passive 2-way loudspeakers housing two 8" lf drivers and a 1.4" hf compression driver with a rotatable cd horn producing a nominal dispersion (h x v) of 75° x 40° or 110° x 40°, respectively. The frequency response extends from 59 hz to above 18 khz. The two 8" ...
Page 6
2.2. Connections the cabinets are fitted with a pair of nlt4 f/m connectors. All four pins of both connectors are wired in parallel. The cabinets use the pin assignments 1+/1–. Pins 2+/2– are designated to active subwoofers. Using the male connector as the input, the female connector allows for dire...
Page 7
Hfa circuit in hfa mode (high frequency attenuation), the hf response of the system is rolled off. Hfa provides a natural, balanced frequency response when a unit is placed close to listeners in near field or delay use. High frequency attenuation begins gradually at 1 khz, dropping by approximately ...
Page 8
2.4. Dispersion characteristics the following graphs show dispersion angle over frequency of a single cabinet plotted using lines of equal sound pressure (isobars) at –6 db and –12 db. Isobar diagram horizontal y7p vertical setup isobar diagram vertical isobar diagram horizontal y7p horizontal setup...
Page 9
Isobar diagram horizontal y10p vertical setup isobar diagram vertical isobar diagram horizontal y10p horizontal setup, horn rotated isobar diagram vertical altering the hf horn dispersion by factory default, the hf horn is fitted to the cabinet providing the nominal horizontal dispersion when the ca...
Page 10
2.5. Technical specifications y7p/y10p system data frequency response (–5 db standard) 59 hz - 18 khz frequency response (–5 db cut mode) 118 hz - 18 khz max. Sound pressure (1 m, free field) y7p with d6/10d 132 db y7p with d12/d20/30d 135 db y7p with d80 137 db y10p with d6/10d 131 db y10p with d12...
Page 11
3.1. Eu conformity of loudspeakers (ce symbol) this declaration applies to: d&b y7p loudspeaker, z0702 d&b y10p loudspeaker, z0703 manufactured by d&b audiotechnik gmbh. All production versions of these types are included, provided they correspond to the original technical version and have not been ...
Page 12
D2710.En .01, 03/2016 © d&b audiotechnik gmbh www.Dbaudio.Com.