E9 manual (3.1 en).
Symbols on the equipment please refer to the information in the operating manual. Warning! Dangerous voltage! Contents safety precautions...............................................................3 information regarding use of loudspeakers...............................................3 e9 ........
Safety precautions information regarding use of loudspeakers warning! Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non- critical sound levels (from a...
E9 fig. 1: e9 loudspeaker the e9 loudspeaker is a full range, two way bass-reflex enclosure which is fitted with a single 12" lf driver passively connected to a 2" hf compression driver. This is coupled to a vertically asymmetrical 90° x 50° cd horn. The asymmetry of the hf horn means that the e9 ha...
Operation with d6 or d12 select the controller setup e9. Within the d12 amplifier this is available in "dual channel" and "mix top/sub" mode. Important! Up to a total of two e9 loudspeakers can be driven by each d6 or d12 amplifier channel. In applications with low continuous levels and low ambient ...
Operation with p1200a fig. 5: controls on e9 controller module up to two e9 cabinets can be driven by each p1200a power amplifier channel fitted with an e9 controller module. Fitting one e9 and one subwoofer controller module allows a single mainframe to drive two e9 cabinets and two active subwoofe...
Technical specifications fig. 7: e9 frequency response standard, bx and cut switch settings e9 system data frequency response (–5 db)....................................................................50 hz - 17 khz max. Sound pressure (1 m, free field) with d12.........................................
Manufacturer's declarations eu conformity of loudspeakers (ce symbol) this declaration applies to: d&b e9 loudspeaker, z2250 manufactured by d&b audiotechnik gmbh. All production versions of this type are included, provided they correspond to the original technical version and have not been subject ...
