Operation manual d-cut flooring cutter lx-230 www.Dcutproducts.Com.
2 safety rules for the flooring cutter 1. Read and understand this instruction manual before operating the d-cut multi-flooring cutters. 2. If you are not thoroughly familiar with the operation of d-cut multi-flooring cutter, obtain advice from a qualified instructor or call 800-982-3434 usa 3. Stay...
3 set up cutting and c installation of the cutter (1) install the cross bar to the cutter base with the provided bolt as shown. Warning: do not put your fingers against the sharp edge of the blade at any time. Laser beam a laser beam assembly is mounted on the top of the blade holder. Push the switc...
4 cutting cutting (1) insert material between the cutting blade and the base as shown and hold the material with the flooring holding bar, then push handle down to complete a cut. Warning: maintain control of the handle. Do not allow handle to slam back after making a cut. Cutting (2) install the 0-...
5 carry hook the chain to the ring on the handle and carry the cutter as shown. Changing blade use theprovided allan wrench to remove the six screws, then hold the blade by each end and carefully remove the blade out of the blade holder. Note: the flat side of the blade faces the table. Warning: do ...
6 part list.
7 part list parts q’ty parts q’ty 1 end cap 2 29 nylon bar 1 2 cross bar 1 30 cutter base 1 3 hex head bolt m8 × 52 1 31 blade holder base 1 4 washer Φ8 1 32 customized screw m6 3 5 customized bolt m10 1 33 chain 1 6 cross head screw m5 × 16 2 34 end plate -1 1 7 spring 1 35 aluminum rotating base 2...
8 wood flooring janka rate lx-230 lx-080 limit on solid wood flooring limit on engineered wood flooring limit on engineered wood flooring eastern white pine 380 yes yes yes basswood 410 yes yes yes white pine 420 yes yes yes hemlock 500 yes yes yes chestnut 540 yes yes yes larch 590 yes yes yes doug...
9 hard maple / sugar maple 1450 no yes no sweet birch 1470 no yes no curupixa 1490 no yes no sapele / sapelli 1510 no yes no kambala 1540 no yes no peroba 1557 no yes no true pine / timborana 1570 no yes no zebrawood 1575 no yes no tualang 1624 no no no wenge / red pine 1630 no no no highland beech ...
