Operation manual d-cut cement siding cutter sc-230 www.Dcutproducts.Com.
2 safety rules for the flooring cutter 1. Read and understand this instruction manual before operating the d-cut multi-flooring cutters. 2. If you are not thoroughly familiar with the operation of d-cut cement siding cutter, obtain advice from a qualified instructor or call 630-916-9100 usa 3. Stay ...
3 installation of the cutter(1) pull 4 legs down to make the cutter base stand up as shown. Installation of the cutter(3) install the cutter head to the base as shown. Warning: do not put your fingers against the sharp edge of the blade at any time. Installation of the cutter(2) install the wheels a...
4 straight cut insert the siding between the cutting blade and the base , pull out the extension bracket, then flush the siding with the guide bar on one side of the rollers, hold the siding and pull handle down to complete a cut. Note: the flat side of the blade should face the working table. Warni...
5 explosive view.
6 parts q’ty parts q’ty 1 supporting leg 4 29 handle a 1 2 washer 2 30 handle b 1 3 wheel shaft 1 31 nut m4 2 4 extension wheel shaft 2 32 right abs handle 1 5 front extension bracket 1 33 screw m4× 30 2 6 locker nut m12 2 34 left abs handle 1 7 roller a 35 lock pin 2 8 lock nut m14 2 36 screw m4× 1...
