D-Link 100BASE-FX User Manual

Other manuals for 100BASE-FX: User Manual, User Manual

Summary of 100BASE-FX

  • Page 1

    10/100base-tx to 100base-fx media converter user’s guide rev. 01 (jun. 2002) 1907m110mm16003 recyclable.

  • Page 2: Table

    2 table of c ontents table of contents ... 2 introduction ............. 3 a bout m edia c onverter ................................... 3 p roduct f eatures ............................................ 3 installation .............. 4 s electing a s ite for the e quipment .................. 4 c onnect...

  • Page 3: Ntroduction

    3 i ntroduction thank you for choosing the 10/100base fast ethernet media converter, the converter introduced here provides one channel media conversion between 10/100base-tx and 100base-fx. About media converter the media converter is a network technology specified by ieee 802.3 10base-t, ieee802.3...

  • Page 4: Nstallation

    4 i nstallation this chapter gives step-by-step installation instructions for the converter. Selecting a site for the equipment as with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically,...

  • Page 5

    5 connecting to power 1. This converter is a plug-and-play device. 2. Connect the supplied ac to dc power adaptor with a power voltage of 7.5vdc/1.5amp to the receptacle on the rear panel of the converter, and then attach the plug into a standard ac outlet with a voltage range from 100 to 260 vac. S...

  • Page 6: Connecting To Power

    6 connecting to power 3. This converter is a plug-and-play device. 4. Connect the supplied ac to dc power adaptor with a power voltage of 7.5vdc/1.5amp to the dc-jack on the converter, and then attach the plug into a standard ac outlet . Installing in a chassis the converter can be fit into any of t...

  • Page 7

    7 led indicator the led indicators give you instant feedback on status of the converter: leds state indication power (pwr) steady power on off power off 100 mbps (100) steady runs at 100mbps on tx port off runs at 10mbps on tx port tx port (tx) fx port (fx) fdx/col steady (fdx) connection in full du...

  • Page 8: Pecifications

    8 s pecifications applicable standards ieee 802.3 10base-t ieee802.3u 100base-tx & 100base-fx fixed ports 1 tx port, 1 fx port speed 10/20mbps for half/full-duplex 100/200mbps for half/full-duplex forwarding rate 148,800pps led indicators per unit- (2 leds): power; speed( 100 ) per port- (2 leds): f...