D-Link 2Voice + 4SW VoIP Router DVG-1402S Quick Installation Manual

Other manuals for 2Voice + 4SW VoIP Router DVG-1402S: User Manual, Quick Installation Manual, User Manual, Manual

Page of 13

Download

Print this page

Bookmark us

their respective holders. Software and specifications subject to change without notice. DVG-1402S VoIP

Router

• DVG-1402S VoIP Router

• Ethernet Cable

(CAT5 UTP Straight-Through)

• 12V, 1.2A

Power Adapter

Before You Begin

If you purchased this Router to share your high-speed Internet connection with other

computers, you must have an established Internet account from an Internet Service

Provider (ISP).

It’s best to use the same computer that is connected to your router for configuring the

DVG-1402S VoIP Router. The DVG-1402S acts as a DHCP server and will assign all

the necessary IP address information on your network. See the Quick Installation Guide

or the Manual on the CD-ROM for setting each network adapter to automatically obtain an

IP address.

Check Your Package Contents

If any of the above items is missing, please contact your reseller.

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.2.3.

DVG-1402S

VoIP Router

Using a power adapter with

a different voltage rating will

damage and void the

warranty for this product.

• CD-ROM

containing Manual and Warranty

1 2 3 4 5 6 7 Next › »

Summary of 2Voice + 4SW VoIP Router DVG-1402S

Page 1
©2005 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dvg-1402s voip router • dvg-1402s voip router • ethernet cable (cat5 utp straight-through) • 12v, 1.2a power...
Page 2
2 connecting the router to your computer a. First, connect the power adapter to the power input at the back panel of the dvg-1402s and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the power led will turn on to indicate proper operation. B....
Page 3: Configure Ip Settings
3 configure ip settings use the following steps to configure a computer running windows xp to be a dhcp client. 1. From the start menu on your desktop, go to my network places. 2. Under network tasks, click view network connections. To connect to the network, make sure the network adapter in your co...
Page 4: On The Properties Button.
4 3. Right-click on the local area connection icon and select properties from the pull-down menu. 4. In the general tab of the local area connection properties menu, highlight internet protocol (tcp/ip) under “this connection uses the following items:” by clicking on it once. Click on the properties...
Page 5: Select
5 5. Select “obtain an ip address automatically” by clicking once in the circle. Click the ok button. Your computer is now ready to use the router’s dhcp server. Connecting additional computers to the dvg-1402s voip router select obtain an ip address automatically in the internet protocol (tcp/ip) p...
Page 6: Initial Web Configuration
6 using additional ethernet (cat5 utp) cables, connect your ethernet- equipped computers to the lan ports on the back panel of the dvg- 1402s. When you have completed the steps in this quick installation guide, your connected network should look similar to this: initial web configuration the login d...
Page 7: Click
7 the home window appears: click on run wizard . Enter “admin” for the user name and password and click ok ..
Page 8: Connection
8 configuring the wan (internet) connection the wizard will guide you through the 5 steps for setting up your preferred internet connection. Click the next button to continue. Step 1: select a time zone from the pull-down menu and click next. Click the next button. Click the next button. Select a ti...
Page 9: Click
9 step 2: enter a new password for the dvg-1402s in the password field. Confirm the new password by entering it again into the verify password field. Click the next button to continue. Step 3: use the radio button to select your preferred internet connection type. Then click next to continue. Click ...
Page 10: Dynamic
10 the following are three typical wan connection examples for dynamic ip address (dhcp), static ip address, and pppoe connection types. Step 4.1: select dynamic ip address if your isp automatically assigns you an ip address. This is the most common way of connecting the dvg-1402s to another modem, ...
Page 11
11 step 4.2: select static ip address if your isp provided you with ip address information that will not change. You will need your isp to provide you with the ip address information about your internet account, if your isp statically assigns an ip address to you. Enter the provided ip address in th...
Page 12
12 step 4.3: select pppoe if your isp uses the point-to-point over ethernet (pppoe) protocol to make the connection. This is the most common connection type for dsl users. Enter the user name for your account in the user name field. Enter the password for your account in the password field. Confirm ...
Page 13: Technical Support
13 technical support you can find software updates and user documentation on the d-link websites. D-link provides free technical support for customers within canada, the united kingdom, and ireland. Customers can contact d-link technical support through our websites, or by phone. For customers withi...