1 airxpert tri-mode dualband wireless cardbus adapter dwl-ag650 ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dwl-ag650 03262003 if any of the above items...
2 the install screen will appear. If the cd autorun function does not automatically start on your computer , go to start > run and type “d:\setup.Exe.” if it does start, proceed to the next screen. The letter “d” represents the letter of the cd-rom drive. Your cd-rom drive may be a different drive l...
3 shut down your computer click next click next click finish.
4 installing the dwl-ag650 wireless cardbus adapter in your computer link/activity led indicates that the dwl-ag650 is properly installed when the computer is on and blinks when data is being transmitted antenna used to wirelessly connect to 802.11a/b or g networks. A. Make sure to turn off the lapt...
5 restart your computer when you restart your computer this found new hardware wizard (windows xp) screen will appear: click next for windows xp: this hardware installation alert screen may appear after the desktop computer restarts. Select install the software automatically (recommended) click cont...
6 for windows 2000, this digital signature not found screen may appear after your computer restarts. The d-link driver software for this device is undergoing windows logo testing. Microsoft certification is pending. Click yes to finalize the installation. Your installation is complete! Continued... ...
7 appendix click the xp networking icon to use the zero configuration wireless settings. Click advanced uncheck “ use windows to configure my wireless net- work settings. ” click ok for windows xp, if you wish to use the airxpert utility, please do the following steps. Click wireless networks.
8 appendix (continued) h i g using the configuration utility a. Status: displays the mac address of the access point that is associated with the dwl-ag650. B. Ssid : the service set identifier is the name assigned to the wireless network. The factory ssid setting is set to default. F. Txrate: the de...
9 j. Ssid: the service set identifier is the name as- signed to the wireless network. The factory ssid setting is set to default. Make changes here to match the ssid on existing wireless router or access point. N. Txrate (11b/g): you can adjust the transmission rate of the 802.11b and 802.11g band t...
10 ip address configuration to connect to a network, make sure the proper network settings are configured for dwl-ag650. For microsoft windows xp: go to start > right click on my network places > select properties > right click and select properties on the network connection associated with the dwl-...
11 for windows 2000 users: go to start > settings > network and dial-up connections > right click and select propertieson the local area connection associated with the dwl- ag650 > select properties used when a dhcp server is available on the local network. (i.E. Router) static ip address setup inpu...
12 technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...
