D-Link AirPlus G DWL-G710 Quick Installation Manual - page 2
2
Connecting The DWL-G710 Wireless
Connecting The DWL-G710 Wireless
Connecting The DWL-G710 Wireless
Connecting The DWL-G710 Wireless
Connecting The DWL-G710 Wireless
Ran
Ran
Ran
Ran
Rang
g
g
g
ge Exten
e Exten
e Exten
e Exten
e Extend
d
d
d
der T
er T
er T
er T
er To Y
o Y
o Y
o Y
o Your N
our N
our N
our N
our Network
etwork
etwork
etwork
etwork
A.
Connect the power adapter to the receptor on the rear panel of the DWL-G710 and
then plug the other end of the power adapter to a wall outlet or power strip. The
Power LED will turn ON to indicate proper operation.
B.
Using a Ethernet cable, insert one end of the cable to the
LAN port on the rear panel
of the DWL-G710 and the other end of the cable to a switch. Note: You also have the
option of connecting the DWL-G710 directly to the computer that will be used for
configuration. The Link LED light will illuminate to indicate a proper Ethernet connection.
C.
Computers with 802.11g wireless adapters such as the DWL-G630 AirPlus
™
G
Wireless Cardbus Adapter and the DWL-G510 AirPlus
™
G Wireless PCI Adapter can
connect to the DWL-G710.
C.
Antenna
Used to wirelessly connect
to 802.11g networks.
B.
LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
A.
Receptor for
Power Adapter
Reset Button