D-Link AirPremier DAP-2565 Quick Install Manual - page 7
Other manuals for AirPremier DAP-2565:
Brochure & Specs, Quick Install Manual
Manual is about: AIRPREMIER N DUAL BAND, PLENUM -RATED POE ACCESS POINT POWERED BY CLOUDCOMMAND
of
12
7
Step 6: No additional configuration is required. Within a few minutes the
Access Point will self configure and become ready to use. You have the option
of later reconfiguring your Access Point to a new static IP address using the
CloudCommand™ interface.
The DAP-2565 is PoE ( Power over Ethernet ) compliant. You can power it
either by using a PoE switch or the included power adapter. Once powered,
the green power LED will turn ON to indicate proper operation.
Step 5:
Once logged in, you will be able to change the Access Point’s IP
address and DNS information to match your existing network configuration.
Step 7: Restore setting change in Step 2.
DAP-2565
Power over Ethernet
Switch or Router
Internet