D-Link AirPro DWL-5000AP Quick Installation Manual

Other manuals for AirPro DWL-5000AP: Reference Manual, Brochure, Manual

Manual is about: 5 GHz Wireless Access Point

Page of 8

Download

Print this page

Bookmark us

Note: The installation screenshots were taken in Windows XP. For other OS, the

installation procedure will be exactly the same but the screenshots will differ.

Contents of Package:

• DWL-5000AP Access Point

• Power Supply – 5V DC, 2.5A*

• Manual on CD

• Printed Quick Installation Guide

• Console Cable

•

Power Cable

*Using a power supply with a different voltage rating will

damage and void the warranty for this product. If any of the

above items are missing, please contact your reseller.

System Requirements:

• Internet Explorer or Netscape Navigator version 4 and higher with Java

Script enabled.

• Computer with Windows; Macintosh; or Linux-based operating system with

an installed Ethernet adapter.

• Connect the power supply to the power cable.

• Connect the power supply to the DWL-5000AP.

• Connect the power cable to an electrical outlet.

• Connect an Ethernet cable (cross-over) to the Ethernet port of the DWL-

5000AP.

• Connect the other end of the Ethernet cable to the computer with the

installed Ethernet adapter.

• Turn your computer on. The Ethernet LED being on will indicate the

connection to the computer.

Connecting DWL-5000AP

1 2 3 4 5 6 7 Next › »

Summary of AirPro DWL-5000AP

Page 1
1 note: the installation screenshots were taken in windows xp. For other os, the installation procedure will be exactly the same but the screenshots will differ. Contents of package: • dwl-5000ap access point • power supply – 5v dc, 2.5a* • manual on cd • printed quick installation guide • console c...
Page 2: Places > Right-Click.
2 • go to start > my network places > right-click. • select properties • right-click on the local area connection for the ethernet adapter. • select properties note: the computer used to configure the dwl-5000ap will need an ip address in the same range and subnet as the dwl- 5000ap. The dwl-5000ap ...
Page 3: Following Ip Address:
3 • in the general tab, select use the following ip address: • in the ip address, enter in the following ip address: 192.168.0.2. Note: the ip address entered must not be the same ip address assigned to any other device in the network. The ip address must follow the 192.168.0.X ip address format • u...
Page 4: Ssid: Default
4 the dwl-5000ap will work out of the box with d-link airpro dwl-a520 and dwl- a650 using the default factory settings. • the default factory settings can be modified in the configuration menu. • the default settings for the dwl-5000ap are the following: ssid: default the ssid on the wireless networ...
Page 5: Data Rate: Best
5 • by clicking on configuration > advanced button, users can modify advanced features of the dwl-5000ap. Data rate: best recommended to keep data rate at best for highest wireless connection. Transmit power: full users can adjust the transmit power settings to limit the area of wireless coverage (i...
Page 6: Add to List To Allow
6 • in the mac address box, enter in the 802.11a network adapter’s mac address. • when all the information has been filled, click on add to list to allow wireless access to the provisioned wireless network adapters. • if any changes are made in the configuration menu, be sure to click update to save...
Page 7: Appendix
7 appendix to reset the d-link airpro dwl-5000ap unit • to do a hard-reset on the d-link airpro dwl-5000ap, please follow these steps. 1. On the back of the dwl-5000ap, locate the reset button. 2. Use a paper clip to press the reset button. 3. Hold for about 5 seconds and release. 4. After the unit ...
Page 8: Technical Support
8 the most recent software and documentation are available on the d-link website. D-link provides free technical support for customers within the united states during the warranty period on this product. U.S. Customers can contact d-link technical support through our web site, or by phone. D-link te...