D-Link Airspot DSA-3100 Quick Installation Manual - Network
3
A.
Ensure that the DSA-3100 is powered ON.
B.
Authentication Port (Public WAN / WLAN) Connection.
Please use a Straight-through Ethernet cable to connect the DSA-3100 to a
switch or a wireless access point to provide public access to your broadband
connection. The Authentication LED light will illuminate to indicate a proper
connection. If the Authentication LED does not illuminate, please check the
device’s physical connections.
C.
Insert an Ethernet cable to the
Local Network (Private LAN) port on the back
panel of the
DSA-3100. Connect the other end of the Ethernet cable to a switch.
If the Local Network LED illuminates, it means you have a proper connection.
D.
Insert an Ethernet cable into the WAN port on the back panel of the DSA-3100.
Connect the other end to a router or directly to a high speed cable or DSL
modem. If the connection is live, then the WAN LED will illuminate.
Connecting The DSA-3100 To Your