Quick install guide + Руководство по быстрой установке + guía de instalación rápida + guia de instalação rápida + 快速安裝手冊 + managed dualband access point dwl-8200ap.
Install guide dwl-8200ap managed dualband access point.
Minimum system requirements: • cd-rom drive • computers with windows ® , macintosh ® , or linux-based operating systems • installed ethernet adapter • internet explorer version 6.0 or netscape navigator ™ version 7.0 and above system requirements package contents note: using a power supply with a di...
Installing the hardware power cord socket lan 1 (poe) antennas lan 2 reset.
Step 1 connect one end of an ethernet cable (included with your package) to the lan 1 (poe) port on the dwl-8200ap, and the other end of the ethernet cable to the port labeled p+data out on the poe base unit. Step 2 connect another ethernet cable from the data in port on the poe base unit to your ro...
6 step 1: insert provided wall anchors in the wall where the mounting plate will be attached. Mounting plate assembly step 2: use the provided screws to secure the mounting plate on the wall..
7 step : attach the remaining screws securely to the back of the dwl-8200ap. Step : attach the dwl-8200ap to the mounting plate..
8 step : slide the dwl-8200ap down into the grooves on the mounting plate to secure it to the plate..
When you have completed the steps in this installation guide and configured your for your network, your network should look similar to this: your setup is complete * maximum wireless signal rate derived from ieee standard 802.11a and 802.11g specifications. Actual data throughput will vary. Network ...
Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within australia: d-link technical support over the telephone: 100-766-868 monday to friday 8:00am to 8:00pm est saturday :00am to 1:00pm est d-link technical support over the int...