Summary of DCM-604
Page 1
Revision 1.0 february 2012.
Page 2
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual fcc statement this device complies with class b part 15 of the fcc rules. The device generates, uses and can radiate radio frequency energy and, if not installed and used as instructed, may cause harmful interference to radio com...
Page 3
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual table of contents 1. Introduction................................................................................................4 f eatures ...........................................................................................
Page 4: 1. Introduction
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 1. Introduction this is a complete docsis 2.0/eurodocsis2.0 compliant cable modem integrate with voip product. It works with all existing docsis/eurodocsis 2.0/1.1/1.0 compliant head- end equipment and multiple service operator (...
Page 5
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual safety precautions for your protection, observe the following safety precautions when setting up and using your equipment. Failure to observe these precautions can result in serious personal injury and damage to your equipment. M...
Page 6: 2. Hardware Overview
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 2. Hardware overview front panel and leds there are nine light-emitting-diodes (leds) located on the front panel provide status information to the users. Led name color mode status on connected with power power green off power fa...
Page 7
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual rear panel and hardware connections this chapter describes the proper steps for connecting your cable modem. Please be sure to follow the steps in the sequence outlined below. Failure to do so could result in improper operation o...
Page 8: 3. Ethernet Installation
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 3. Ethernet installation the lan port you are using is auto-negotiating 10/100mbps (switch) ethernet interface. You can use the ethernet port to connect to the internet with an ethernet network device such as nic/hub/switch throu...
Page 9: 2003
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 4. Installing the usb driver for windows vista / xp / 2003 if you connect the cable modem to pc via usb port, then your will need to install the usb driver. Please follow the description below to install the driver for your pc. I...
Page 10
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 10 7. Windows shall find the location of usb driver and complete the installation. Click finish. 8. For more information, please refer to user’s manual..
Page 11: 5. Web Management
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5. Web management for easy-changing the default setting or quick-checking diagnostics for troubleshooting, a web-based gui is built-in for your access. 5.1 enter modem's ip address use the following procedures to login to your dc...
Page 12
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.2.1 software status the software page shows how long the dcm-604 has operated since last being powered up, and some key information the dcm-604 received during the initialization process with your cable service provider. If net...
Page 13
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual the table on the bottom of this page shows the information of dhcp clients including the ip and mac addresses of each pc. Since mac addresses are unique and permanently fixed into hardware, you can identify any pc listed by its m...
Page 14
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual page. For example, if this ip address were 211.20.15.28, you would navigate to http:// 211.20.15.28:8080 to reach the dcm-604’s web management page from a remote location. Multicast enable: to enable multicast traffic to pass thr...
Page 15
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual to enable mac filtering feature of dcm-604, enter the mac address of the lan device and click apply button. 5.4.4 port filtering the port filtering page allows you to enter ranges of destination ports (applications) that you don’...
Page 16
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual using the port forwarding page, you can provide local services (web servers, ftp servers, mail servers, etc) for people on the internet or play internet games. A table of commonly used port numbers is also provided. 5.4.6 port tr...
Page 17
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual if you locate a http server on this machine, anyone will be able to access that http server by using your dcm-604’s ip address as the destination. This may be used when problem applications do not work with port triggers. The set...
Page 18
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.5.3 time of day access policy this page allows configuration of time access policies to block all internet traffic to and from specific network devices based on time of day setting. 5.5.4 event log this page displays parental c...
Page 19
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.6 wireless 5.6.1 radio the wireless connection stage configuration of the wireless radio includes current country and channel number. 5.6.2 802.11 primary network the 802.11 primary network allows configuration of the primary w...
Page 20
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.6.4 advanced this page allows configuration of data rates and wifi thresholds. 5.6.5 bridging this page allows configuration of wds features. 20
Page 21
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.6.6 wmm this page allows configuration of the wi-fi multimedia qos. 5.6.7 guest network this page allows configuration of a guest network.. 21.
Page 22
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 5.7 mta section mta has 5 sub-items, which indicate the status of mta. These information can help you to understand the parameters of mta operation. 5.7.1 status this page displays initialization status of the mta. 22.
Page 23: 6. Troubleshooting
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 6. Troubleshooting this chapter provides solutions to problems that can occur during the installation and operation of the dcm-604. Read the following descriptions if you are having problems. (the examples below are illustrated i...
Page 24
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual to reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot p...
Page 25
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual to change the mtu rate on your router follow the steps below: • open your browser, enter the ip address of your router (192.168.0.1) and click ok. • enter your username (admin) and password (password). Click ok to enter the web c...
Page 26
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual appendix: cable modem specification table 1. Rf downstream specification (docsis) parameter value notes frequency range 88 mhz to 860 mhz +/- 30 khz demodulation 64qam. 256qam input power range -15 dbmv to +15 dbmv one channel sy...
Page 27
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual table 4. Rf upstream specification (for eurodocsis system) parameter value frequency range 5 mhz to 65 mhz modulation qpsk, 8qam, 16qam, 32qam, 64qam, 128qam (tcm only) symbol rate tdma: 160k, 320k, 640k, 1280k, 2560k, 5120ksym/s...
Page 28
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual under many circumstances, it may be desirable for mobile network devices to link to a conventional ethernet lan in order to use servers, printers or an internet connection supplied through the wired lan. A wireless router is a de...
Page 29
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual • share internet connection and printer with multiple computers • no need to dedicate office space where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobilit...
Page 30
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual check your ip address after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E. Wireless router) automatically. To verify your ip address, please fol...
Page 31
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual example: if the router´s lan ip address is 192.168.0.1, make your ip address 192.168.0.X where x is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set default gateway the same as the...
Page 32
Dcm-604 series emta embedded multimedia terminal adaptor user’s manual 32.