D-Link DCS-50 User Manual

1

Model No.:  DCS-50

User’s Manual

Ⅰ.

Introduction

The DCS-50 Camera Housing is constructed from die-cast aluminium and is powder coated 

and  stove  finished.The  design  and  manufacture  is  to  the  highest  technical  standard  with 

environmental protection to level IP 66.  The Housing is supplied complete with an adjustable 

Semi-Cable-Managed Mounting Bracket. 

Ⅱ.

Mounting configuration of  DCS-50

(D)

(E)

(F)

(K)

(G)

Fig.1

(B)

90

°

90

°

78

65

(H)

Fig.2

Inner space for camera mount

W90 x H70 x L230mm

1. Use the rear section of the Mounting Bracket (D) 

as a template for marking the position on the 

wall of the Mounting Holes (H). Remove & drill to 

pattern required.

2. Attach the Mounting Bracket arm to the wall 

using the rawlplugs and screws provided.

3. Attach the main Housing enclosure (K) to the 

Mounting Bracket with 2 of 1/4” x 14.7 mm 

Trilobular screws (F) provided.

4. Release Screw (E) on the Mounting Bracket to 

pan the Housing and release screw (G) to tilt the 

Housing. Position the Housing as required for 

the correct Camera coverage then tighten both 

Screws to secure. 

5. Feed cables through the Cover Plate (B) on 

the Mounting Bracket from the wall, or by using 

cable conduits as required.