D-Link DCS-6004L? DCS-6005L Quick Installation Manual - Mounting The Camera

DCS-6004L / DCS-6005L

5

E

N

G

LI

S

H

MOUNTING THE CAMERA

Step 1:

The camera needs to be separated from the mounting base to 

expose the holes in the mounting base. Remove the camera head 

from the mounting base by firmly holding the camera with the D-Link 

logo facing you and then sliding the mounting base towards you.

Please refer to the steps below to assist you with mounting the camera. We suggest that you 

configure the camera before mounting.

Step 2:

Place the mounting base alignment sticker where you want to 

position the camera. Depending on the material of the wall or ceiling, 

use proper tools to drill two holes where you placed the alignment 

sticker. If the wall is made out of concrete, drill the holes first, then 

insert the plastic anchors to support the screws.

1

2

Step 3:

Place the mounting base over the holes that are in the wall. Make 

sure to align the mounting base holes with the holes in the wall. Use 

the supplied screws to attach the mounting base to the surface of 

the wall.

Step 4:

With the D-Link logo facing you, reattach the camera to the mounting 

plate by sliding the camera towards you until it locks into position.

Step 5:

Adjust the direction of the camera as desired by rotating it.

3

5

4