2 d-link dcs-6513 user manual d-link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and...
User manual dcs-6513 full hd wdr day & night outdoor dome network camera version 1.0
4 d-link dcs-6513 user manual section 1: product overview product overview package contents if any of the above items are missing, please contact your reseller. Note: using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for thi...
5 d-link dcs-6513 user manual section 1: product overview introduction the dcs-6513 full hd wdr day & night outdoor dome network camera is a professional, vandal-resistant surveillance and security solution for small, medium, and large enterprises alike. The dcs-6513 uses a 3 megapixel progressive s...
6 d-link dcs-6513 user manual section 1: product overview p-iris the p-iris lens in the dcs-6513 solves the long-standing problem of capturing sharp images in varying light conditions. The dcs-6513 optimizes the iris opening under all lighting conditions, resulting in images with better clarity, res...
7 d-link dcs-6513 user manual section 1: product overview 1 camera lens vari-focal lens to record video of the surrounding area 2 light sensor the light sensor measures the lighting conditions and switches between color and infrared accordingly 3 ir leds infrared leds illuminate the camera's field o...
8 d-link dcs-6513 user manual section 1: product overview cable harness 1 bnc connector the bnc connector is recommended for use with handheld monitors to check the field of view during installation. 2 power connector power connector for the provided 12v dc power adapter. 3 audio in (a.In) connects ...
9 d-link dcs-6513 user manual section 1: product overview internal 1 micro sd card slot insert an micro sd card for local storage of recorded image and video 1 disassemble the camera open the camera enclosure by loosen the 4 screws. Lift the dome off the base of the camera. Install the micro sd card...
10 d-link dcs-6513 user manual section 2: assembly and installation assembly and installatio n standard mounting instructions height: 23 mm (0.9 inches) diameter: 183 mm (7.2 inches) weight: 400 g (0.9 lbs) concealed cable installation 1. Disassemble the camera enclosure (see page 9). 2. Thread the ...
11 d-link dcs-6513 user manual section 2: assembly and installation 1. Connect the ethernet cable and the power cable, threading them through the hole in the ceiling. 2. Push the dome body up over the base of the camera. 3. Attach the dome to the base of the camera using the three long screws and th...
12 d-link dcs-6513 user manual section 2: assembly and installation exposed cable installation height: 23 mm (0.9 inches) diameter: 183 mm (7.2 inches) weight: 400 g (0.9 lbs) 1. Disassemble the camera enclosure (see page 9). 2. Remove the small screw to release the faceplate on the side of the base...
13 d-link dcs-6513 user manual section 2: assembly and installation 1. Attach the dual-holed plate to the base of the camera 2. Thread the cables through the waterproof plugs on the side of the base of the camera. Attach the cables to the corresponding cable connectors. 3. Place the plastic cable co...
14 d-link dcs-6513 user manual section 2: assembly and installation 1. Locate a suitable position on the ceiling for the mounting plate to be installed. 2. Use the mounting template to mark the holes for installation. 3. Drill four separate 6mm holes corresponding to the holes in the mounting templa...
15 d-link dcs-6513 user manual section 2: assembly and installation pendant mount (optional) height: 201 mm (7.9 inches) diameter: 150 mm (5.9 inches ) weight: 665 g (1.45 lbs) pendant bracket bracket cap rubber seal bracket cap mounting plate 1. Attach the mounting plate to the bracket cap using th...
16 d-link dcs-6513 user manual section 2: assembly and installation 1. Connect the ethernet cable and the power cable, then thread them through the pendant bracket. 2. Place the dome body onto the base of the camera..
17 d-link dcs-6513 user manual section 2: assembly and installation 1. Attach the dome to the base of the camera using the three long screws and the provided security screw..
18 d-link dcs-6513 user manual section 2: assembly and installation height: 253 mm (9.96 inches) diameter: 150 mm (5.9 inches) weight: 770 g (1.7 lbs) bent mount (optional) bracket cap bent bracket bracket cap mounting plate 1. Attach the mounting plate to the bracket cap using the three screws. 2. ...
19 d-link dcs-6513 user manual section 2: assembly and installation dome camera bent bracket 1. Place the dome body onto the base of the camera..
20 d-link dcs-6513 user manual section 2: assembly and installation 1. Attach the dome to the base of the camera using the three long screws and the provided security screw..
21 d-link dcs-6513 user manual section 2: assembly and installation the dcs-6513 comes with an optional weather shield to protect your network camera against damage from adverse weather. If you are installing the dcs-6513 in a location where it will be exposed to harsh weather, it is recommended tha...
22 d-link dcs-6513 user manual section 2: assembly and installation general connection using 12 v dc power adapter 1. Connect the network camera to a hub via an ethernet cable. 2. Connect the supplied power cable from the camera to a power outlet..
23 d-link dcs-6513 user manual section 2: assembly and installation general connection using 24 v ac power wiring 1. Connect the network camera to a hub via an ethernet cable. 2. Connect the supplied power cable from the camera to a power source..
24 d-link dcs-6513 user manual section 2: assembly and installation connection with a poe hub 1. If you are using a poe hub, connect the ip camera to the hub via an ethernet cable, which will provide transmission of both power and data over a single cable..
25 d-link dcs-6513 user manual section 2: assembly and installation adjust the viewing angle of the 3-axis mechanism turn the lens module left and right until the desired position is achieved. Tighten the pan screw once completed. Loosen the tilt screws on both sides of the camera, and turn the lens...
26 d-link dcs-6513 user manual section 2: assembly and installation step 1 insert the installation cd-rom into your computer’s optical drive to start the autorun program. The cd-rom will open the camera installation wizard. The setup wizard will guide you through the installation process through to ...
27 d-link dcs-6513 user manual section 2: assembly and installation step 4 by default the admin id is "admin" and the password field is left blank. It is recommended that you create and confirm a password for your device. Click next to continue. Step 5 select static ip if your internet service provi...
28 d-link dcs-6513 user manual section 2: assembly and installation step 6 confirm your camera login details and ip address details and click restart. The led on the front of the dcs-6513 will blink, then turn solid green once it successfully connects to your network.. Step 7 your dcs-6513 camera is...
29 d-link dcs-6513 user manual section 2: assembly and installation d-viewcam software is included for the administrator to manage multiple d-link ip cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-viewcam is a comprehensive management tool for i...
30 d-link dcs-6513 user manual section 2: assembly and installation step 3 click finish to complete the installation. Step 4 to start d-viewcam, select start > all programs > d-link d-viewcam > main console. Step 5 for more detailed operation of using d-viewcam software, please refer to the d-viewca...
31 d-link dcs-6513 user manual section 3: configuration configuration using the configuration interface after completing the camera installation wizard, you are ready to use your camera. The camera’s built-in web configuration utility is designed to allow you to easily access and configure your dcs-...
32 d-link dcs-6513 user manual section 3: configuration live video this section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen. You can zoom in and...
33 d-link dcs-6513 user manual section 3: configuration if any presets have been defined, selecting a preset from this list will display it. Go to: (preset list) video profile 1 video profile 2 video profile 3 full screen mode take a snapshot record a video clip set a storage folder listen/stop audi...
34 d-link dcs-6513 user manual section 3: configuration setup setup wizard to configure your network camera, click internet connection setup wizard. Alternatively, you may click manual internet connection setup to manually configure your network camera and skip to "network setup" on page 40. To quic...
35 d-link dcs-6513 user manual section 3: configuration internet connection setup wizard this wizard will guide you through a step-by-step process to configure your new d-link camera and connect the camera to the internet. Click next to continue. Click next to continue. If your internet service prov...
36 d-link dcs-6513 user manual section 3: configuration select static ip if your internet service provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct configuration information and click next to continue. If you are us...
37 d-link dcs-6513 user manual section 3: configuration configure the correct time to ensure that all events will be triggered as scheduled. Click next to continue. Confirm the settings are correct and click apply to save them. The settings will be saved to the dcs-6513 and the camera will restart..
38 d-link dcs-6513 user manual section 3: configuration this wizard will guide you through a step-by-step process to configure your camera's motion detection functions. Click next to continue. Motion detection setup wizard step 1 this step will allow you to enable or disable motion detection, specif...
39 d-link dcs-6513 user manual section 3: configuration step 3 this step allows you to specify how you will receive event notifications from your camera. You may choose not to receive notifications, or to receive notifications via e-mail or ftp. Please enter the relevant information for your e-mail ...
40 d-link dcs-6513 user manual section 3: configuration network setup use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the save settings button to save your changes. Lan settings: dhcp: static ...
41 d-link dcs-6513 user manual section 3: configuration enable upnp presentation: enable upnp port forwarding: enable pppoe: user name / password: http port: access name for stream 1~3: https port: authentication: rtsp port: enabling this setting allows your camera to be configured as a upnp device ...
42 d-link dcs-6513 user manual section 3: configuration enable cos: enable qos: enable ipv6: enable multicast for stream enabling the class of service setting implements a best-effort policy without making any bandwidth reservations. Enabling qos allows you to specify a traffic priority policy to en...
43 d-link dcs-6513 user manual section 3: configuration dynamic dns ddns (dynamic domain name server) will hold a dns host name and synchronize the public ip address of the modem when it has been modified. A user name and password are required when using the ddns service. After making any changes, c...
44 d-link dcs-6513 user manual section 3: configuration image setup in this section, you may configure the video image settings for your camera. A preview of the image will be shown in live video. Enable privacy mask: mirror: flip: power line: white balance: exposure mode: the privacy mask setting a...
45 d-link dcs-6513 user manual section 3: configuration enable automatic iris adjustment iris adjustment iris speed denoise: brightness: contrast: saturation: sharpness: wdr level: reset default: the low noise option will focus on creating a high- quality picture without noise. You can also create 3...
46 d-link dcs-6513 user manual section 3: configuration audio and video you may configure up to 3 video profiles with different settings for your camera. Hence, you may set up different profiles for your computer and mobile display. In addition, you may also configure the two-way audio settings for ...
47 d-link dcs-6513 user manual section 3: configuration video quality: constant bit rate: fixed quality: audio in off: audio in gain level: audio out off: audio out volume level: this limits the maximum frame rate, which can be combined with the "fixed quality" option to optimize the bandwidth utili...
48 d-link dcs-6513 user manual section 3: configuration lens control the settings on this page allow you to remotely fine tune the zoom and focus to achieve optimal performance. Focus mode: select an option from the drop down menu. Auto allow the camera to automatically adjust manual show the focus ...
49 d-link dcs-6513 user manual section 3: configuration preset this screen allows you to set preset points for the eptz function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specific part of the area y...
50 d-link dcs-6513 user manual section 3: configuration preset list: to add a preset to the sequence, select it from the drop- down box at the bottom of this window, set the dwell time to determine how long the camera view will stay at that preset, then click the add button. The preset name will app...
51 d-link dcs-6513 user manual section 3: configuration motion detection enabling video motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring. After making any changes, click the save settings button to save your changes...
52 d-link dcs-6513 user manual section 3: configuration time and date this section allows you to automatically or manually configure, update, and maintain the internal system clock for your camera. After making any changes, click the save settings button to save your changes. Time zone: enable dayli...
53 d-link dcs-6513 user manual section 3: configuration event setup in a typical application, when motion is detected, the dcs-6513 sends images to a ftp server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by various sources, such as motion detection....
54 d-link dcs-6513 user manual section 3: configuration the event setup page includes 4 different sections. • event • server • media • recording 1. To add a new item - "event, server or media," click add. A screen will appear and allow you to update the fields accordingly. 2. To delete the selected ...
55 d-link dcs-6513 user manual section 3: configuration add server server name: e-mail: ftp: network storage: sd card: enter the unique name of your server. Enter the configuration for the target e-mail server account. Enter the configuration for the target ftp server account. Specify a network stor...
56 d-link dcs-6513 user manual section 3: configuration add media media name: snapshot: source: send pre-event image(s) [0~4]: send post-event image(s) [0~7]: enter a unique name for media type you want to create. Select this option to set the media type to snapshots. Set the video profile to use as...
57 d-link dcs-6513 user manual section 3: configuration file name prefix: add date and time suffix to file name: video clip: source: pre-event recording: maximum duration: maximum file size: system log: the prefix name will be added on the file name. Snapshots 20080104_100341 date and time suffix the...
58 d-link dcs-6513 user manual section 3: configuration add event create and schedule up to 3 events with their own settings here. After making any changes, click the save settings button to save your changes. Event name: enable this event: priority: delay: trigger: video motion detection: periodic:...
59 d-link dcs-6513 user manual section 3: configuration add recording recording entry name: enable this recording: priority: source: recording schedule: recording settings: destination: total cycling recording size: the unique name of the entry. Select this to enable the recording function. Set the ...
60 d-link dcs-6513 user manual section 3: configuration size of each file for recording: time of each file for recording: file name prefix: if this is selected, files will be separated based on the file size you specify. If this is selected, files will be separated based on the maximum length you sp...
61 d-link dcs-6513 user manual section 3: configuration sd card format sd card: view recorded picture: playback recorded video: refresh: click this icon to automatically format the sd card and create "picture" & "video" folders. If the picture files are stored on the sd card, click on the picture fo...
62 d-link dcs-6513 user manual section 3: configuration advanced digital input/output this screen allows you to control the behavior of digital input and digital output devices. The i/o connector provides the physical interface for digital output (do) and digital input (di) that is used for connecti...
63 d-link dcs-6513 user manual section 3: configuration here you can configure the icr and ir settings. An ir(infrared) cut-removable (icr) filter can be disengaged for increased sensitivity in low light environments. Automatic: day mode: night mode: schedule mode: ir light control: off: on: sync: s...
64 d-link dcs-6513 user manual section 3: configuration https this page allows you to install and activate an https certificate for secure access to your camera. After making any changes, click the save settings button to save your changes. Enable https secure connection: create certificate method: ...
65 d-link dcs-6513 user manual section 3: configuration access list here you can set access permissions for users to view your dcs-6513. Allow list: start ip address: end ip address: delete allow list: deny list: delete deny list: the list of ip addresses that have the access right to the camera. Th...
66 d-link dcs-6513 user manual section 3: configuration maintenance device management you may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and configure the osd...
67 d-link dcs-6513 user manual section 3: configuration system in this section, you may backup, restore and reset the camera configuration, or reboot the camera. Save to local hard drive: load from local hard drive: restore to factory default: reboot device: you may save your current camera configur...
68 d-link dcs-6513 user manual section 3: configuration firmware upgrade the camera's current firmware version will be displayed on this screen. You may visit the d-link support website to check for the latest available firmware version. To upgrade the firmware on your dcs-6513, please download and ...
69 d-link dcs-6513 user manual section 3: configuration status device info this page displays detailed information about your device and network connection..
70 d-link dcs-6513 user manual section 3: configuration this page displays the log information of your camera. You may download the information by clicking download. You may also click clear to delete the saved log information. Logs.
71 d-link dcs-6513 user manual section 3: configuration this page provides helpful information regarding camera operation. Help.
72 d-link dcs-6513 user manual appendix a: di/do specifications di/do specifications.
73 d-link dcs-6513 user manual appendix a: technical specifications technical specifications camera camera hardware profile 1/2.8” 3 megapixel progressive cmos sensor 20 meter ir illumination distance minimum illumination 0 lux with ir led on built-in infrared-cut removable (icr) filter modu...
74 d-link dcs-6513 user manual appendix a: technical specifications system management system requirements for web interface browser: internet explorer, firefox, chrome, or safari event management motion detection event notification and uploading of snapshots/video clips via e-mail or ftp sup...
75 d-link dcs-6513 user manual appendix a: technical specifications dimensions.
