Configuration guide for dcs series cameras www.Dlink.Co.In.
Accessing device configuting internet configuration guide for dcs series cameras.
How to access the device:- 3. I. Connect the ethernet cable in ethernet port of camera from your router. Led should be steady / stable green. 2. Connect the power adaptor to device and power on the device. Power led should be red. 1. Unbox the camera. Or camera can be connected wirelessly to your ro...
Go to setup > wireless setup connection mode is infrastructure. Click on enable wireless > select site survey how to access the device:- ii. Iii. Then access camera web gui using default settings. Ip address: 192.168.0.20 user name: admin password: blank.
Iv. V. Select your ssid from the list and click on select . Select wireless security mode same as your wireless router and then put the password/security of your wireless router key then click save settings . Vi. You can check wireless connectivity status in the status page. How to access the device...
5. If you don’t have wi-fi enabled computer then you can connect the lan cable provided in the box between any lan port of the router and computer lan port. 6. Run the camera utility from product cd. It will guide you through the setup. How to configure the internet:- 4. If you have the computer wit...
7. It will check for the required activex on your pc 8. Select no and click next. 9. Click next . How to configure the internet:-.
10. Click next if the connections are done as per the image. How to configure the internet:- how to configure the internet:- 11. If the led is green, click yes ..
12. The setup will detect the camera with the ip address. Click next . If not detected then kindly check the connectivity and then retry. If there is no password set for camera, you have to set it when below window appears and click next . How to configure the internet:- how to configure the interne...
How to configure the internet:- how to configure the internet:- if you already have a mydlink account, then select yes . If you don’t have, select no and register for same. If you have registered mydlink account then put username and password. For ex: username: d i n m u m b a i @ h o t m a i l . C ...
How to configure the internet:- how to configure the internet:- this will prompt for username and password to login into the account. 16. For first time it will ask to update the firmware. By clicking on update now you can update the firmware. By selecting camera you can view the video. 17..
