D-Link DE-220PCT - Ethernet 10 Mbps ISA Nic Combo User Manual - Network Cable Connections

 DE-220P Series Ethernet Adapter / User’s Guide

Installation

11

setup.exe

.  Be certain that you select different

configuration settings from those that have been

selected for another card. Make a note of the con-

figuration settings you select, to help you select

different settings in configuring remaining cards.

5

Repeat Steps 3 and 4 as necessary to configure all

DE-220P Series cards which are to be included in

the multiple-card installation.

6.

Shut down the computer and unplug its power-

cord.  Re-install all of the configured cards.  Re-

place the computer’s chassis cover.

Network Cable Connections

Before connecting a network cable to the DE-220P

Series adapter, ascertain that your DE-220P model

suits your network cable medium, as summarized

in the following table.

4

  Then refer to one of the three

4

Models DE-220PCT and DE-220PCAT feature multiple network

cable connectors for convenience during network cable upgrades,

and for versatility when your equipment is moved between areas

with different types of network media.  Only one network cable

may be connected to any adapter in any given installation.