D-Link DES-1005D Quick Installation Manual - Hub to Des-1005D

Page of 4

Download

Bookmark us

The LED indicators for PC connection depend on the LAN card’s capabilities. If LED

indicators are not lit after making a proper connection, check the PC LAN card, the

cable and the DES-1005D conditions and connections.

1. The “100LINK/ACT,10LINK/ACT” LED indicator lights green for hookup to

100Mbps speed or light amber for hookup to 10Mbps speed.

Hub to DES-1005D

The

hub (10 or 100BASE-TX) can be connected to the DES-1005D via a two-pair

Category 3, 4, 5 UTP/STP straight cables. For 100Mbps operation a Category 5

cable must be used. The connection is accomplished from any port of the hub to any

port of the switch.

DES-1005D can be connected to another switch or other devices (routers,

bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable. A

Category 5 cable must be used for 100Mbps operation. The connection can be done

from any (MDI-X) port of the Switch (Switch A) to any of the 10Mbps, 100Mbps (MDI-

X) port of the other switch (switch B) or other devices.

If you are encountering problems setting up your network, please refer to the User’s

Guide that came with the switch. It contains many more rules, charts, explanations

and examples to help you get your network up and running.

Additional help is available online at http://www.dlink.com in the United States, at

http://www.dlink.co.uk in the United Kingdom, or through our offices listed at the back

of the User’s Guide.

Page 1
Before you begin des-1005d 10/100m fast ethernet switch this quick installation guide gives step-by-step instructions for setting up the d-link des-1005d 10/100m fast ethernet switch. The model you have purchased may appear slightly different from those shown in the illustrations. For more detailed ...
Page 2: Unpacking
2 unpacking please make sure the following items are present and undamaged. 3.Rubber feet 4.Screws and anchors 1.The switch 2.Ac power adapter physical installation putting the rubber feet for desktop installation, please take time now to attach the included rubber feet to the base of the switch..
Page 3: Mounting Switch On Wall
Mounting switch on wall the des-1005d can be mounted on a wall. Two mounting slots are provided on the bottom side of the hub for this purpose. Make sure that the front panel is exposed to allow you to view the leds while the unit is on. Pc to des-1005d a pc can be connected to the switch via a two-...
Page 4: Hub to Des-1005D
The led indicators for pc connection depend on the lan card’s capabilities. If led indicators are not lit after making a proper connection, check the pc lan card, the cable and the des-1005d conditions and connections. 1. The “100link/act,10link/act” led indicator lights green for hookup to 100mbps ...