D-Link DES 1024R - Plus Switch User Manual - page 12
Other manuals for DES 1024R - Plus Switch:
User Manual
Manual is about: 10/100 Fast
of
20
10/100 Fast Ethernet Switch User’s Guide
6
Next, make sure that the device is powered off and then remove the
plain bracket on the front of the switch.
Figure 2.4 Removing the plain bracket
After removing the plain bracket, slide the module in the guide rails all
the way into the slot and secure the screws.
Figure 2.5 Sliding the module into position
When properly installed, the Slot LED will be lit after powering on the
Switch (see Chapter 3 for more information about LEDs, including a
diagram).
Note: Always remember to turn off the power before a module is inserted
or removed.